Reviews Copper Slag

FLASLD FLASLD Acrylic Coated Welding Blanket,Fireproof Fiberglass Fire Blanket, Welding Curtain for Industrial and Home Use (6 ft x 8 ft, Yellow)

  • FLASLD acrylic welding blanket is used in welding, cutting, laser welding, and soldering. It has a temperature resistance of 1472 ℉, which can effectively resist welding slag, cutting sparks, and flames. It can protect your important equipment and workshop from Damaged by welding slag or high temperature..
  • Do you know what is the most troublesome thing in the use of the welding blanket? Yes, it's the tiny glass fiber debris, it's almost an unavoidable problem, it will irritate the skin and cause itching, if you accidentally inhale it, it will also cause damage to the lungs, FLASLD coats the acrylic on the welding blanket, the acrylic and fiberglass are tightly bonded together, there is no fiberglass debris, no itch and lung damage!.
  • The FLASLD acrylic welding blanket is made of 0.5mm thick alkali-free fiberglass cloth and coated with acrylic on both sides. Compared with ordinary welding blankets, it has higher temperature resistance and is more durable, It weighs 600g per square meter, is lightweight, foldable and easy to carry..
  • We have added multiple grommets to the edge of the FLASLD acrylic welding blanket, it is easy to hang and fix, it can be used as a welding curtain to block welding arc light and welding slag, we provide 5 sizes and two colors....
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

Makita XCS01Z 18V LXT Cordless Rebar Cutter

  • ... ★ & : Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ : The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min..
  • ★ & : 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • ★ : We offer a - , - - , please submit warranty registration form on our website. - customer service(via phone/email) is available to assist you..
Check Stock

CHOWEL BHS-W330 Welding Chipping Hammer Slag Removal Tool with Forged Construction Shock Reduction Grip & lightweight 13oz

  • High-Quality Slag Remover Chipping / Welding Hammer.
  • Perfect for cleaning and removing slag from all welds.
  • Rubber grip for durable, reduce impact and prevention for slip out from the hand.
  • It's designed as Slag and Chipping hammer for welding. Please do not use this chipping hammer as a chopping Axe or Sledge Hammer..
Check Stock

Walter Surface Technologies 53F605 E-Weld Plasma Protection Liquid (10 Kg) - Ceramic Fluid for Plasma Cutting Tables. Anti-Spatter Solution

  • Anti-Spatter Liquid: ceramic anti-spatter solution can be safely applied to cutting tables to reduce the buildup of slag over time. It also decreases the amount of time and effort required in cleaning the slag off the tables.
  • Functions: prevent the creation of uneven cutting surfaces with this plasma solution. It also helps in increasing the lifespan of the equipment it is applied on.
  • Efficiency: it serves as a preventive measure in keeping the slag from adhering to slats of cutting tables. This protective solution decreases the time, efforts, and costs required in equipment maintenance and helps generating revenues.
  • Usage: use anti-spatter liquid with easy-to-use E-weld arm-mounted sprayer that applies a thin layer over the surface to prevent any wastage. The anti-spatter liquid is available in a 10 kg container, which is enough to cover 50-100 square meters.
Check Stock

PROSHI Compact air needle scaler remove slag rust paint and dirt quickly with this needle scaler

  • Air pneumatic needle slag cleaner deburring tool removing tool rust corrosion slag remove cleaning Tool..
  • 12 hardened 3mm steel needles remove weld slag, rust, paint, and dirt. working trip: 6-7mm, blows per minute: 4000bpm.
  • One-trigger-operation eliminates complicated preparing steps and is easy to use. Meanwhile, a professional touch trigger not only adds comfort but....
  • With its compact size and excellent performance, this lightweight needle rust remover is designed to clean smaller surfaces without messy abrasive....
  • Needle scaler easy adjustment without special tools. What's more, it features an exhaust design that keeps the human body away from dust, and....
Check Stock

Rustark 3 Pack Scratch Wire Brush Slag Removal Tool Kit With Welding Leather Gloves, 10 Inch Welding Chipping Hammer and Wirebrush, Welding Slag Removal Tool for Cleaning Removing Slag

  • 【What you Get】The welding slag remover set contains 1 pcs welding slag hammer, 1 pcs welding slag brush, 1 pairs welding gloves, totally 3 pcs. Full and convenient welding slay removal tool for you, saving your energy to looking for extra tool. In addition, offer reliable after-sale service.
  • Pls feel free contact us for any dissatisfaction. We will reply you within 12 hours for your satisfaction..
  • 【Welding Chipping Hammer】Made of durable high strength steel with multi-layer black powder coated for rust-resistance. Dual-head design with flat chisel on one end and point chisel on the other end, allowing it easier to use in tight and small space.The spring handle is designed to reduce the impact forces of contact. Coil Spring handle design for absorbing the shock of contact while cleaning and shipping way welding debris..
  • 【Steel Wire Scratch Brush】Made of solid stainless steel, wooden handle with pre-drilled hole for hanging, sturdy and durable, long service time. 252 mm in totally length, proper size for easier grip. Ideal for aggressive cleaning and removing rust and paint from most surfaces..
  • 【Protective Welding Gloves】 Made from thick and soft shoulder split natural cowhide leather with heat resistance,wear-resistance,puncture resista....
Check Stock

Welding hammer/Slag hammer/Chipping hammer/welder hammer economic chisels, forged steel structures and shock-absorbing handles

  • 【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. Practical slag removal tool we offer..
  • 【ALL IN ONE PACK】You are going to receive 1 piece of welding hammer and 1 piece of wire brush and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning.
  • 【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
  • 【WELDING CHIPPING HAMMER】Professional welding tool! Shockproof tool! Made of carbon steel, heat treatment, high hardness and toughness, it....
Check Stock

Welding 10 OZ hammer/Slag/Chipping/welder hammer economic chisel, forged steel structures and shock-absorbing handles. Rock hard. Non rotary. Flat and spike sides.

  • The Welding Hammer: Spring handle welding chisel hammer skimmer. Used for removing slag and welding residue..
  • The Spring Welding Design: Spring handle is designed to absorb the shock of contact while cleaning and shipping way welding debris..
  • The Practical Design: One end is a flat chisel and the other end is a conical chisel to get into tight spots..
  • Spiral barrel spring type handles with springy shock-proof design at the end with hook handle.
  • It can be used to remove metal slag, remove weld slag from welds and weld spatter, and beat hard objects, etc..
Check Stock

TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2\ Clean Cut

  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut..
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials..
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control..
  • Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need..
Check Stock