Reviews Copper Alloy Relays

CAIG LABORATORIES, DeoxIT L260-C1, Lithium Grease, Copper Particles, 28g Squeeze Tube, Pack of 1

  • Lithium grease, precision lubrication, oxidation/corrosion protection, excellent wear and pressure resistance..
  • Copper particles: Contains copper particles assist in breaking up oxidation and corrosion. Copper is conductive. Other particles available.
  • without particles, aluminum, quartz, graphite, graphite/quartz and Teflon..
  • High dripping point grease, Temperature range.
  • -40 to 260 C. Greases improve performance and reliability of electrical contacts and mechanical components that require precise lubrication..
  • Ideal for applications in all industries.
  • Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc..
  • USES – ELECTRICAL & MECHANICAL: Antennas, battery terminals, Bearings, Buss bars, chain/sprockets, commutators, conductor rails, conductors, contactors, disconnects, doors/closures, drying & processing equipment, hatch closures, high amperage/high voltage, lifts, cranes, rack & pinion, robotics, power tools, relays & switches, slide bushings, O-rings/seals, worm gears, etc.....
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • ...ful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small a....
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • ...dering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
  • 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with....
Check Stock

Fastronix High Current 40/60A Waterproof Relay Panel with Sockets

  • Includes (4) Waterproof Fastronix 40/60 amp Bosch Style Relays and Sockets.
  • Control up to 4 Separate Devices with One Relay Panel.
  • Relays can be Separated and Used in ANY Configuration.
  • Relays Also Provide Negative Spike Suppression.
  • Note: Relays are Waterproof, Sockets are NOT waterproof..
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

2pcs LED Flasher Relay 2 Pin,12V Relay with Harness for Motorcycle LED Flash Turn Signal Control Relays

  • 【High Quality】ZSSElec 12 volt relay is made of durable high-quality materials (ABS plastic, sturdy copper wire, and metal),copper wires can....
  • 【Easy to Install】Just need to connect turn signal flasher relay 2 pins to the battery. No tools are required. (NOTE: if the wiring connectors are....
  • 【Flasher Relay for LED Turn Signal】ZSSElec electronic turn signal flasher relay help control the flash rate of the lights on your motorcycles,....
  • 【Motorcycle Flasher Relays】Automotive replacement flashers compatible for most bike scooter, motorcycle,such as such as Honda, Kawasaki, Suzuki,....
  • 【Packing】2pcs 12V 2pin LED flasher relay to meet your demands..
Check Stock

TEMCo 14 AWG Copper Magnet Wire - 1 lb 79 ft 155°C Magnetic Coil Red

  • Average Wire Diameter (in.): 0.0675 (with insulation), 0.0641 (no insulation).
  • Double (Heavy) Build enamel, Polyurethane base coat, Polyamide overcoat..
  • Shape: Solid Round Copper (99.9% pure). NOTE: Both ends of wire are accessible..
  • Approvals: NEMA MW 80-C, IEC Designation (60317-21), UL Recognized (File: E32638).
  • Applications include but not limited to: Appliance motors, relays, timer and clock coils, encapsulated coils, arts & crafts..
Check Stock

TEMCo 30 AWG Copper Magnet Wire - 2 oz 392 ft 155°C Magnetic Coil Green

  • Average Wire Diameter (in.): 0.0116 (with insulation), 0.01 (no insulation).
  • Double (Heavy) Build enamel, Polyurethane base coat, Polyamide overcoat..
  • Shape: Solid Round Copper (99.9% pure). NOTE: Both ends of wire are accessible..
  • Approvals: NEMA MW 80-C, IEC Designation (60317-21), UL Recognized (File: E32638).
  • Applications include but not limited to: Appliance motors, relays, timer and clock coils, encapsulated coils, arts & crafts..
Check Stock

TEMCo 10 AWG Copper Magnet Wire - 5 lb 157 ft 155°C Magnetic Coil Red

  • Average Wire Diameter (in.): 0.1054 (with insulation), 0.1019 (no insulation).
  • Double (Heavy) Build enamel, Polyurethane base coat, Polyamide overcoat..
  • Shape: Solid Round Copper (99.9% pure). NOTE: Both ends of wire are accessible..
  • Approvals: NEMA MW 80-C, IEC Designation (60317-21), UL Recognized (File: E32638).
  • Applications include but not limited to: Appliance motors, relays, timer and clock coils, encapsulated coils, arts & crafts..
Check Stock