Reviews Controller Silicon Case

EATON MOELLER PKZM0-10 MANUAL MOTOR CONTROLLER

  • 【SCR Controller】This item has new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a good solution to over-current of electric stove wire caused by low resistance during cooling..
  • 【1000W】It can easily adjust the output voltage on a scale of 0-100% (nonlinear) to power electric device. It can be used as power supply for large electrical devices of less than 10000W, enough for household appliances or for small factory..
  • 【Heatsink】Designed with large and thick heat sink that would enhance heat dissipation. Voltage regulator has wave voltage absorbing circuit and effective protects large power silicon controlled rectifier, longer service life and more durable..
  • 【Suitable for】Could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc..
  • 【Note】AC input, AC output, output voltage is lower than(or equal to) input voltage.
  • voltage can be adjusted only when connected to load.
Check Stock

Micro Connectors Addressable RGB Extension Cable - 50cm/ 2-Pack, Model Number: F04-01ARGB50-2P

  • ...r(+5V, DATA, N/A, GND) , Compatible with Asus Aura, Gigabyte RGB Fusion, MSI Mystic Light, ASROCK RGB LED etc. Before you place the order, make sure there is 3-PIN ARGB header on your Motherboard. If you want to get the lighting effects as shown in the video, please choose our Addressable RGB PSU extension Kit with controller..
  • 【Easy installation & Widely Compatibility】Including 1 x 24 Pin 25cm/9.8inches 18AWG PSU extension cable, 1 x 20cm/7.9inches customized diffused neon led strips. The led strips come with Silicon Tube, it's very soft. The psu extension cable come with Teflon Housing, it may be little hard, but it also can be curved in any shape less than 90 degrees, allowing for stable installation. And it is suitable for E-ATX Motherboard, ATX Motherboard, Micro-ATX Motherboard, etc. power range 250W-1300W..
  • 【QUALITY WARRANTY】One-Year Warranty. Any questions for our Airgoo Product both before and after you place the order, contact us anytime, we will reply you within 24 hours..
Check Stock

TechKen Wireless Controller for Wii, Motion Plus Wii Controller Compatible for Wii, Wii U

  • TechKen Wii Nunchuck remote motion controller features built-in motion sensing and an remote control both. It works smoothly and sensitively just as original Nintendo does. Please note it’s an third party product, not Nintendo original product..
  • EASY SYNC STEPS -- Push the small button on the controller (where the batteries go) then push the red button on the Wii console (under the little door), then you’re able to synchronize with Nintendo Wii..
  • Compatible with all versions of Nintendo Wii console. Powered by 2 AA batteries(not included).
  • Easy steps to rumble feature(MOTION PLUS) and a built-in speaker. Connect with the console by simply pressing the SYNC button. Built-in motion sensor, accentuate your sense of touch while playing. Built-in motion plus to enhance the control. Powerful speaker provides instant audio feedback..
  • Safety Straps and Silicon case are included..
Check Stock

sisma Switch Controller Case Compatible with Nintendo Switch Pro Controller, Travel Safekeeping Controller Holder Protective Cover Storage Case Black Carrying Bag

  • Switch Controller Travel Case : Designed specifically to store and protect Switch Pro controller when travelling or home safekeeping.
  • Fits Game Controller : Compatible with official Nintendo Switch Pro controller. (Tips: The case is only for official Switch Pro controller, not for any third party controllers.).
  • Holds and Protects Your Controller Like A Glove : Inner storage space is the tailor-made size and shape for official Switch Pro controller. The controller can be holded in the case to avoid from bumps and jostles.
  • Need to Carry Switch Controller On The Go? The controller case can be put into backpack or luggage easily and take everywhere you want to go. Top cover will not press analog joysticks or any buttons while the controller is in the case, protects your controller against from button damage or joystick drift or dust.
  • Keeps the Controller Battery Shut-off : There is enough place to prevent the shoulder buttons from being pressed while the controller is in the case, so the case keeps the controller battery shut off and the controller will not attempts constantly to connect to the Switch console.
Check Stock

Disney Universe (Xbox 360) by Disney

  • Suitable only for Nintendo Switch game machine..
  • Silicon holding net protects and will not scratch the edges of your Nintendo Switch..
  • Perfect for playing games in a car, leaving hands free to operate the remote controller..
  • Allows easy access to the buttons and screens of Nintendo Switch..
  • Note: Game remote controllers must be disconnected from the Switch screen before fitting the screen into the silicon holder..
Check Stock

Vicious

  • Switch Controller Travel Case : Designed specifically to store and protect Switch Pro controller when travelling or home safekeeping.
  • Fits Game Controller : Compatible with official Nintendo Switch Pro controller. (Tips: The case is only for official Switch Pro controller, not for....
  • Holds and Protects Your Controller Like A Glove : Inner storage space is the tailor-made size and shape for official Switch Pro controller. The....
  • Need to Carry Switch Controller On The Go? The controller case can be put into backpack or luggage easily and take everywhere you want to go. Top....
  • Keeps the Controller Battery Shut-off : There is enough place to prevent the shoulder buttons from being pressed while the controller is in the case,....
Check Stock

Motion Plus Remote Controller Compatible with Wii, TechKen Built-in 2 in 1 Remote Motion Nunchuck Controller with Silicon Case Compatible Nintendo Wii and Wii U

  • TechKen Wii Nunchuck remote motion controller features built-in motion sensing and an remote control both. It works smoothly and sensitively just as original Nintendo does. Please note it’s an third party product, not Nintendo original product..
  • EASY SYNC STEPS -- Push the small button on the controller (where the batteries go) then push the red button on the Wii console (under the little door), then you’re able to synchronize with Nintendo Wii..
  • Compatible with all versions of Nintendo Wii console. Powered by 2 AA batteries(not included).
  • Easy steps to rumble feature(MOTION PLUS) and a built-in speaker. Connect with the console by simply pressing the SYNC button. Built-in motion sensor, accentuate your sense of touch while playing. Built-in motion plus to enhance the control. Powerful speaker provides instant audio feedback..
  • Safety Straps and Silicon case are included..
Check Stock

2 x Division Thumb Grips Sticks SHD Analog Extender Controller Thumbstick for PS4 Mod Yellow

  • The division tactical joystick add-ons to raise the height of controller joysticks, these are designed to provide the varying difference to each....
Check Stock

sisma Travel Case Compatible with Official Xbox One X or One S Wireless Controller, Game Controller Holder Hard Shell Protective Cover Storage Case Home Safekeeping Carrying Bag, Black

  • Xbox Controller Travel Case : Designed specifically to store and protect Xbox One wireless controller when travelling or home safekeeping.
  • Fits Game Controller : Compatible with official Xbox One X or One S wireless controller. (Tips: The case is only for official Xbox One wireless controller, not for any third party controllers.).
  • Holds and Protects Your Controller Like A Glove : Inner storage space is the tailor-made size and shape for official Xbox One wireless controller. The controller can be holded in the case to avoid from bumps and jostles.
  • Need to Carry Your Controller On The Go? The controller case can be put into backpack or luggage easily and take everywhere you want to go. Top cover will not press analog joysticks or any buttons while the controller is in the case, protects your controller against from button damage or joystick drift or dust.
  • Shock Absorbing Protection : The heavy-duty case for gaming controller is designed with dual-layered material to protect your controller against from drop damage.
Check Stock

Case for LG TV Remotes, Remote Cover for LG Smart TV Remote Control AKB75095307 AKB75375604 AKB74915305 Original, Replacement Silicone Skin Sleeve Glow in The Dark Green

  • Full Protection: This silicone remote cover is made of soft light weigh silicone against accidental drops. Glow in the dark cover for LG tv remotes is also a battery cover prevent the back cover and battery of the remote from being lost. Prevent the child from opening the back cover and playing it..
  • Easier to Find: The remote cover for LG remote akb75095307 with bright colors, adds vibrant different colors to remote for LG, which is easier to find..
  • Easy to Use: This remote for LG tv silicon case is very soft, and the back has a non-slip ergonomic design provides a comfortable grip bar. And the simple sleeve design, this remote case is super easy to install and easy to use..
  • Fits Like a Glove: This remote case for lg smart tv controller fits perfectly. It fits snugly and thickness is just right. You can touch the buttons without any affecting. The protective case is specially designed for LG AKB75095307,AKB75375604,AKB74915305, AKB75675304 original smart tv remote control replacement..
  • Notice: Package Includes 1 silicone remote cover for lg remote only..
Check Stock