Reviews Control Port

Teyleten Robot IR Infrared Slotted Optical Optocoupler Module Speed Measuring Sensor 3.3V to 5V Photo Interrupter Sensor for Arduino（5pcs）

  • use: 1. +5 +5 is the positive input port of the power supply, which can be connected to a voltage of 3.3V~5V.
  • 2. GND GND is the negative input port of the power supply. OUT OUT is the signal output port, which is connected to the I/O port of the single-chip....
  • For other main control boards or higher-level main control boards (such as Arm), if you need to set the I/O port to input/output mode, you must set it....
  • Note: For Arduino players should set the MCU's I/O port to input mode/receive mode, otherwise it cannot be used..
Check Stock

DJI Ronin-SC Handheld 3-Axis Gimbal Stabilizer for Sony Mirrorless Camera, (a7 III, a7RIII, a7R IV, a6600) Pro Video Bundle with Bag, 64GB SD Card, 2 Green Extreme NP-FZ100 Battery, Dual Charger

  • Gimbal - BG18 Grip - Extended Grip/Tripod - Quick-Release Plate - Camera Riser - Storage Case - Phone Holder - Lens Support - 2x 8-Pin Port Cover - 2x Allen Wrench - 3x Camera Screw 1/4 "-20 & 1/4 "-20 - 4x Screw M4 - Multi-Camera Control Cable (Multi-USB) - Multi-Camera Control Cable (Type-C) - USB-C Cable - Multi-Camera Control Adapter (Type-C To Micro USB) - DJI 1 Year Limited Warranty - Photo Video Bag - Black - 2x Green Extreme NP-FZ100 LI-Ion Battery Pack - Dual Charger -.
  • Accessory Connections: 1/4" Mounting Hole, 3/8" Mounting Hole, Camera Control Port, Accessory Port, USB-C Port, RSA Accessory Expansion Port.
  • Intelligent Battery: RB2-2450mAh-7.2VType: 18650 LiPoCapacity: 2450 mAhPower: 17.64 WhBattery Life: 11 hCharging Time: Approx. 2.5 h (5 V/2A)Charging Temperature: 41 Degree to 104 Degree F (5 Degree to 40 Degree C).
  • Mobile Assistant Software: Requirements: iOS 9 or above.
Check Stock

Tekonsha 3016-P Brake Control Wiring Adapter for GM

  • Vehicle specific brake control wiring harness.
  • For brake controls with wiring port built into back of unit.
  • Plug the brake control end of wiring harness into back of brake control and vehicle end into vehicle's port.
  • Brake controls with 2-plug style of wiring harness are identified with Plug and Play logo.
Check Stock

CNCTOPBAOS 3 Axis GRBL Control Board USB Port CNC Router Controller Board grbl 1.1f with GRBL Offline Controller Remote Hand Control for CNC Engraving Milling Machine Mini DIY 1610 CNC 3018 PRO

  • ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller.
  • ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
  • ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
  • ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
  • ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
  • Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
  • ♞【Offline Controller】It supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check Stock

Tekonsha 3025-P Brake Control Wiring Adapter for GM , black

  • Vehicle specific brake control wiring harness.
  • For brake controls with wiring port built into back of unit.
  • Plug the brake control end of wiring harness into back of brake control and vehicle end into vehicle's port.
  • Brake controls with 2-plug style of wiring harness are identified with Plug and Play logo.
Check Stock

Nyko Wand+ for Wii (White/Black)

  • Full compatibility with all Wii Software.
  • Full Motion Technology for compatibility with all Wii Motion Plus games with no additional dongle.
  • Trans-Port Technology allows for use of custom shells and accessories.
  • Accelerometer for motion control game play.
  • CMOS camera for pointer/cursor functionality.
  • Trans-Port technology relocates key buttons & vibration to specially designed accessories for more immersive control & compatibility.
  • Full-Motion technology provides advanced 1-to-1 movement detection for the most accurate motion control input.
  • Accelerometer for full-motion control gameplay.
  • Fully compatible with Wii MotionPlus & all Wii software.
Check Stock

Tekonsha 3036-P Brake Control Wiring Adapter for Ford , silver

  • Vehicle specific brake control wiring harness.
  • For brake controls with wiring port built into back of unit.
  • Plug the brake control end of wiring harness into back of brake control and vehicle end into vehicle's port.
  • Brake controls with 2-plug style of wiring harness are identified with Plug and Play logo.
Check Stock

TESmart DisplayPort + HDMI Dual Monitor KVM Switch Support UHD 4K@60Hz USB 2.0 Devices Control Up to 2 Computers with DP+HDMI+USB Input Ports and 2 Montiors with HDMI Port Grey

  • 【Dual-Monitor-KVM-Switch-2 Port 】TESmart KVM switch using only 1 set of keyboard, mouse and 2 monitors to control 2 computers, support display one....
  • 【DP + HDMI KVM Switch with USB2.0 Port】Supports Connecting your usb 2.0 port device such as Scanner/USB driver/3D Printer/Monitor Camera.
  • 【Support Many Ways to Control】Support keyboard hotkey, front panel buttons and IR signals to control this Dual Monitor KVM (AAA battery not....
  • 【4K 60Hz Resolution & Smart EDID】The HDMI+DP KVM Switch max resolution up to 3840*[email protected], it comes with EDID emulators in each input port, keep....
  • 【★ A Higher Level of Keyboard and Mouse Compatibility】 Support keyboard and mouse pass-through mode (Semi-DDM USB). You can use more keyboard....
Check Stock

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software serial port or hardware serial port to be connected to GPRS Shield.
Check Stock

Rybozen USB 3.0 Switch Selector, 4 Port KVM Switches USB Hub Peripheral KVM Switcher Box, 4 Computers Sharing 4 USB Devices, for PC, Printer, Scanner, Mouse, Keyboard, Button Switch & Remote Control

  • 【4 Port USB 3.0 Switch selector】This 4 Port USB 3.0 Switches allow using button switch or remote control to toggle between 4 computers to share 4 USB 3.0 peripheral devices without constantly pulling cables or setting up complicated network sharing software..
  • 【Remote Control & One-Touch Switching】You can easily switch between 4 computers by pressing the button or pressing the remote control, the flashing LED indicating the active computer. Remote control is used for long-distance control USB switches, it can be disabled for use in RF-sensitive environments..
  • 【Multiple Device Sharing】The KVM USB switch allows you to share multiple devices such as printers, scanners, mouse, keyboard, card reader,u disk, and other USB devices between 4 computers, reducing cable and accessory clutter. Compatibility with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS..
  • 【5Gbps speed, USB 3.0 Interface】The 4 port USB hub KVM switch supports USB 3.0 speeds of up to 5Gbps. The Keyboard mouse switch is backward compatible with USB 3.0 & USB 2.0 peripherals. USB C interface of the included USB C to USB-A cable supports USB-C and Thunderbolt 3 hosts..
  • 【More Stable Connection】KVM USB 3.0 switch with a separate micro USB female port for option power, ....
Check Stock