Reviews Construction Machine Tool Concrete

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

850W Electric Concrete Vibrator, Hand Held Power Concrete Vibrators Cement Bubble Remover,13000 VPM With 4.9 Ft Long Copper Rod Concrete Tools

  • ...D SAFE: Power concrete tools are equipped with a thickened reinforced cast aluminum shell, enlarged air outlets, and high-strength ABS cooling fan blades, which are high-pressure, durable, and corrosion-resistant, saving your purchase cost. A Handheld concrete vibrator with an ergonomics design, offers you reliable construction Tools.
  • ★EASY TO USE: Striped concave point design to create a comfortable non-slip pattern handle. With a self-locking switch, when working for a long time, pressing the lock switch can be operated continuously. Reduce work intensity and relieve finger fatigue. The shaft simply screws on to drive unit, no other tools are required.
  • ★WIDE APPLICATION: This Concrete vibrator is used for mixing concrete in construction and decoration environments to increase the overflow rate of air bubbles and increase the thickness of cement. It is widely used in vibrating ground beams, prefabricated cement components, interior decoration, house construction, foundation laying, outdoor decoration, etc. It is an essential tool..
  • ★NOTE: When you put the power on the vibrator is working, but the vibrating bar does not get the same frequency as the vibrator. please hit the shell rod with the side of the head, or shake the head of the rocker for a....
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Single Cylinder Two Stroke Gasoline Toothless Saw 12 Inch Cutting Machine, 4.5kw Power Cutting Machine Concrete Cutting Machine Cutting Tools

  • ⚙️【PRODUCT SPECIFICATION】Material: Aluminum Alloy Box, Steel Protective Cover.
  • ⚙️【WIDE APPLICATION】 The Gas Power Cutter are used in fire fighting, municipal construction work, road and bridge construction and other motor and field work.
  • ⚙️【POWERFUL CUTTER】With 4.5kw Power, our Powerful all-around power cutter is ideal for cutting concrete and masonry in alteration, renovation and new construction work.
  • ⚙️【COMFORTABLE DESIGN】The features a compact design, low weight & correctly positioned handles to make the machine easier to handle. The comfortable handles provides more comfortable handling during long work shifts.
  • hold with both hands to effectively reduce vibration.
  • ⚙️【HIGH EFFICIENCY】This compact and efficient tool is powered by a 95 cc engine with a full 4.5kw for the most demanding concrete cutting.
  • The Power Cutting Machine is lightweight with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity.
Check Stock

IMAYCC Power Concrete Vibrators 1300W 110V Concrete Vibrator with 2m (6.6ft) Copper Shaft Rod

  • 【Powerfull and Efficient】Concrete Vibrator with 1300 Watt motor，13,000 Vibrations Per Minute ,4800rpm, Applicable to consolidate cement and remove all the trapped air bubbles to give you the toughest cement..
  • 【Easy to use】The concrete vibrabrater Carry with lightweight and ergonomic handle design is ideal for consistent use.
  • self-locking switch can be locked by one button,To keep the machine running for a long time, reduce work intensity and relieve finger fatigue..
  • 【Durable and Safe】Thickened and strengthened cast aluminum casing , Enlarge the air outlet and adopt a porous heat dissipation design..
  • 【Lengthened Vibrator】Long Work Area 6.6 ft. long Copper shaft for easy use and long reach,enlarge your work range..
  • 【Widely Applicable】Necessary tool for patching, construction, cement pillar and grape rack pouring, construction of highway, fence and bridge, etc，1 year worry-free after-sale service( free exchange or 100% refund if product was defective as quality problems ).
Check Stock

GRAPHITE Hard Lead Carpenter Pencil #2 Lumber Pencil 72 PCS - Industrial Pencil Wood Flooring Marker for Wood Working Tools Marking & Concrete Marking - Natural Lacquered

  • DRAWS VISIBLE MARKING LINES - This GRAPHITE Carpenters Pencil is used to mark drill holes, draw out visible dark marking lines, measurements, and other construction needs. Its broad #2 pencil lead makes coarse lines on rough surfaces, then flip it to make fine lines for detailed drawings. This construction tool can be used as a wood flooring marker and is also a great tool for concrete marking. Its solid graphite lead leaves highly visible marks great for precision tracing..
  • HEAVY-DUTY WOODWORKING MARKERS - This wide graphite pencil set is sturdy enough to endure all kinds of construction environments. These industrial pencils can withstand the stress of marking on hard, rough, uneven surface materials including wood, plywood, cardboard, concrete, unfinished lumber, and other surfaces. This lumber marking tool is useful and preferred by woodworkers, building construction workers, contractors, DIY workers, craftsmen, builders, tradesmen, and masons..
  • EASY TO SPOT & SHARPENS WITH PRECISION - GRAPHITE makes quality wood pencils that are dependable, durable, and safe. Its sturdy flat lead is easy to sharpen with a knife or a sharpener and is lined with high-quality lacquer to prevent breakage and splintering. It can draw clear, crisp marking lines on a....
Check Stock

WOODPECKER ST64 Pneumatic Concrete T Nailer, 14 Gauge 3/4" to 2-1/2" Heavy Duty Air Concrete Nail Gun for Furring Strips, Masonry, Cement, Concrete Brick Nailing

  • 【Lightweight Construction & Same Function】Die-cast aluminum housing reduces device weight and ensures the tool's durability. Net weight is 4.7LBS (2.11KG). This model is smaller & lighter than ST64 Concrete T Nailer while keeping the same functions and applications. ** If nails are not demanded over 1-1/2'' (38mm) length, this tool is recommended **.
  • 【Safer in Use】A easy-switch safety lock is designed for considering fewer injuries caused by accidental shooting. Turn up is to lock and down is to release.
  • 【User-Friendly Design】Magnetic Nose allows you to secure metal steel sheets without touching.
  • The Spacious Slide-Loading Magazine is for easy loading and automatically adjusts nails length.
  • Comfort Rubber Grip helps eliminates operating fatigue.
  • 【Drives 14 Gauge Concrete Nails】Uses 14 Gauge 3/4-inch to 1-1/2-inch (18-38mm) length concrete T nails. ** Comes with 400PCS 3/4-inch (18mm) Concrete Nails For Free**.
  • 【Practical Application】Ideal tool for doing some soft masonry standard concrete nailing jobs like brick wall foundations, nailing b....
Check Stock

XtremepowerUS 16 Handheld Power Cutter Circular Saw Wet/Dry 52CC Gas-Powered Water Line Concrete Saw Cutter Guide Roller No Blade

  • Compact & Efficient - This compact and efficient tool from XtrempowerUS is powered by a 52 cc engine with a full 2000W for the most demanding concrete....
  • Reduced Vibrations - The new blade guard help reduced vibration, which means you can work full days without having to take a break.
  • Fine-Toned Ergonomics Design - The XtrempowerUS features a compact design, low weight & correctly positioned handles to make the machine easier to....
  • Dual Integrated Feature - Used wet or dry, the dual integrated dust management system takes the dust out of the job.
  • Ideal Power Cutter - Powerful all-around power cutter is ideal for cutting concrete and masonry in alteration, renovation and new construction work.
Check Stock

IMAYCC Concrete Vibrator, 1500W 110V Power Concrete Vibrators with 6.6 FT/2M Shaft Rod Concrete Tools, 14400 Vibration per Minute Hand Held Concrete Vibrator Suitable for Various Concrete Construction

  • 【Power Concrete Vibrators】Hand Held Concrete Tools, 1500W Power, 110V/60Hz Voltage frequency, Speed is 4200rpm, The vibration frequency is 240HZ per second. As we all know, the greater power of the concrete vibrator, the better effect of the vibration. This High-power construction tools will make your work easier and efficient..
  • 【High-quality Motor】The concrete vibration motor use of high quality and temperature resistant pure copper enameled wire, full copper winding, which is not only sturdy and stable, but also has a longer service life..
  • 【External Carbon Brush Holder Design】The all-copper carbon brush holder is externally designed, which can easily and quickly replace the carbon brushes, making it easier to maintain this product..
  • 【Durable and Sturdy Shell】We also design thickened cast aluminum housing, which has high pressure resistance, durability and corrosion resistance and can effectively protect the motor. The concrete vibrator tool color is red, it looks beautiful and generous..
  • 【Applicable & Warranty】The electric concrete vibrator for concrete construction of roads, tunnels, bridges, houses, etc. Guaranteed for one year, and defective parts are replaced free of charge. If you have any questions about the product or assembl....
Check Stock

BOSCH REVOLVE2000 GRL2000-40HVK Exterior 2000ft Range Horizontal/Vertical Self-Leveling Cordless Rotary Laser Kit with Tripod, 13ft Grade Rod and Laser Receiver

  • COMPREHENSIVE KIT: includes GRL2000-40HV rotary laser, laser receiver, tripod, grade rod, wall mount, remote control, laser glasses, target plate and all-in-one hard carrying case.
  • MULTIPLE HORIZONTAL APPLICATIONS: use for site preparation, grading a lot, stake-out for pouring concrete foundations slabs, setting concrete forms for commercial or large residential construction, underground utility work including plumbing and more.
  • MANUAL DUAL SLOPE: allows the user to adjust the slope angle on the laser on both the X- and Y-axes for excavation, drainage and concrete pouring.
  • Class IIIa laser product, 003c5mw power output, 635 nm.
  • ELECTRONIC SELF-LEVELING: allows for easy setup and use on the job.
  • DISTURBANCE MONITOR: indicates if tool position changes, ensuring consistent leveling accuracy.
Check Stock