Reviews Constant Tension Exhaust Clamp

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Roadformer 2.5 Butt Joint Exhaust Band Clamp - Aluminized Steel for 2.5 OD Exhaust Pipe Muffler Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 2.5" butt joint exhaust clamp is made in high quality standard, this band clamp is used for 2.5" OD to 2.5" OD exhaust....
  • REAL SEALING CAPABILITY - Roadformer 2.5" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached....
  • DURALITY & RELIABILITY - exhaust clamp band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior....
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and....
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock