Reviews Conduit Bushing Assortment Kit

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50'，ID：1inch，OD：1.22inch， The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze

  • EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

lesolar Trailing Arm Bushing Tool Kit Suspension Control Arm Bushing Tool Kits Rear Bushing Removal Tool Kit with Storage Carrying Case Suitable for The Ford Focus Bushing Removal MK1 1998

  • 【Application】Control arm bushing tool kit has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, Mazda 5 CR, CW, MPV 2005, V50 2004-2012, S40 MK sedan 2003-2012..
  • 【Performance】Rear trailing arm bushing tool has excellent performance, which can protect your car from scratches, and it is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to Use and Storage】Bushing removal tool kit is easy to use and install without the need to remove the rear axle, saving a lot of time. What's more, Heavy-duty plastic blow-molded carrying case is easy transportation, safe storage, and quick organization..
  • 【Material】Rear bushing tool kit is made of selected carbon steel. The greater the hardness, the higher the strength, and the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】The trailing arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you ....
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency

  • Keep your skateboard better and more comfortable.
  • Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
  • The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check Stock

Dorman 14104 Shift Cable Bushing Kit Compatible with Select Models (OE FIX)

  • Convenient solution - this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money - save the expense and significant installation time of replacing an entire cable assembly.
  • Ensure fit - this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years.
  • Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

E-cowlboy T-0220-700R4 Bushing Seal Installer Remover Tool Kit Driver Kit/Tool for GM 700-R4 4L60 4L60E 4L65E Transmission (13pc)

  • COMPATIBILITY -- This 13 piece bushing driver kit is design to help PROPERLY rebuild for the 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions..
  • SUPERIOR QUALITY – Made of high quality solid steel and manufactured to meet the OEM specifications and performance, resisting rust and corrsion, ensures an unparalleled long lifespan..
  • EXCELLENT DESIGN -- Comparable to Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. Bushing driver handle included mounting board easily mounts to wall for easy access!.
  • KIT CONTENT -- Includes 12 Bushing Drivers (#61-71) and one Driver Handle, which are all placed in a black blow mold case (13-in-1) for easy storage and transportation. With this case, job would be done quickly..
  • 100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Bushing Driver Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock