Reviews Conduit Annealing Machine

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50'，ID：1inch，OD：1.22inch， The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
  • 【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,，UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

HITBOX 200A MIG Welder New Arrival 4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick/Gas Gassless Multiprocess Digital Welder 110 / 220V Dual Voltage IGBT Inverter Welding Soldering Machine

  • Synergic Control & Non-noise: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.the fan with automatic temperature control makes the machine run very quietly.
  • Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate. Both 0.030" and 0.035" flux-cored wires can be used. In addition to regular metals,HITBOX mig250 can also weld Aluminum alloy with graphite conduit to alleviate any kinks or jams.
  • [Spool Gun/Aluminum Welding Opinion] HITBOX MIG250 supports welding with a spool gun and can also weld Aluminum alloy with graphite conduit to alleviate any kinks or jams(spool gun is not included).
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload..
  • 1 Year Warranty: HITBOX MIG250II welder offers good warranty. If you meet any problem when using this machine, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence..
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

DEEFILL M14 x 1.5 Magnetic Oil Drain Plug, Stainless Steel Oil Drain Plug with Copper Crush Washer Replacement for Ford, GM, Hyundai, KIA and Accord, CRV, Civic, Pilot, Fit, Odyssey

  • High-quality Materials: Made of stainless steel, DEEFILL Oil Drain Plug not easy to break and can be used for countless years..
  • Super Magnetic Force: Using high-strength rare earth neodymium magnets with a magnetic force of up to 5000 gauss, which can absorb impurities in the oil effectively, protect your engine from metal fragments, and extend the life of the engine..
  • Easy to install: Included with Annealing Red Copper Crush Washer, it is easy to operate, which can prevent oil leakage and increase engine life effectively..
  • Package Include: 1 pcs Stainless Steel Magnetic Engine Oil Drain Plug & 1 pcs Annealing Red Copper Crush Washer.
  • Customer Service: We have a professional team to solve all kinds of problems for you. DEEFILL offer you best for your vehicles. 【DEEFILL - WE HOLD IT ALL TOGETHER】.
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock