Reviews Concrete Tool

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

WOODPECKER ST64 Pneumatic Concrete T Nailer, 14 Gauge 3/4" to 2-1/2" Heavy Duty Air Concrete Nail Gun for Furring Strips, Masonry, Cement, Concrete Brick Nailing

  • 【Lightweight Construction & Same Function】Die-cast aluminum housing reduces device weight and ensures the tool's durability. Net weight is 4.7LBS (2.11KG). This model is smaller & lighter than ST64 Concrete T Nailer while keeping the same functions and applications. ** If nails are not demanded over 1-1/2'' (38mm) length, this tool is recommended **.
  • 【Safer in Use】A easy-switch safety lock is designed for considering fewer injuries caused by accidental shooting. Turn up is to lock and down is to release.
  • 【User-Friendly Design】Magnetic Nose allows you to secure metal steel sheets without touching.
  • The Spacious Slide-Loading Magazine is for easy loading and automatically adjusts nails length.
  • Comfort Rubber Grip helps eliminates operating fatigue.
  • 【Drives 14 Gauge Concrete Nails】Uses 14 Gauge 3/4-inch to 1-1/2-inch (18-38mm) length concrete T nails. ** Comes with 400PCS 3/4-inch (18mm) Concrete Nails For Free**.
  • 【Practical Application】Ideal tool for doing some soft masonry standard concrete nailing jobs like brick wall foundations, nailing b....
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Diamabrush By Malish 941601202 16-inch Concrete Prep Plus Tool, 25 Grit, Counter Clockwise with NP9200 Clutch Plate and 1.5-inch Riser

  • Abrades the surface to prep for difficult jobs. The ultimate concrete prep tool for hard-to-prep surfaces..
  • Perfect for removing a thin layer of paint or epoxy. This new heavy duty prep tool is ideally suited to prep concrete floors for an application of paints, epoxies, or stains..
  • Uses a 25 diamond grit bonded to metallic backing and assembled to flexible steel spring blades.
  • Flexible blades designed to always remain in contact with the floor regardless of floor imperfections.
  • The concrete prep Plus tool can be used with any floor buffer or auto-scrubber.
Check Stock

Diamabrush 4 1/2 inch Diamond Concrete Grinding Wheel for Preparing and Cleaning Concrete Stone Brick and Other Hard Surfaces by Removing Mastic Adhesive and Other Materials

  • The Diamabrush 4.5” Concrete Tool is designed for use by both professionals and do-it-yourselfers that require fast, effective surface preparation and coating removal. Perfect for edge work or small rooms, the Diamabrush concrete hand tool’s patented design enables users to easily remove glues, mastics, epoxies, paints, thin-set, and other stubborn coatings.
  • The Diamabrush hand tools require little pressure, avoiding unwanted ridge marks left in the concrete by other diamond tooling, yielding astounding results and perfect profiles achieved with every use.  It’s also ideal for removing yellow striping lines. .
  • Simple – Easy to use on all brands of exisiting 4.5”and 7” angled grinders with a 5/8” 11” thread..
  • Sustainable – The Diamabrush system is a mechanical removal solution that is chemical-free..
  • Performance – The patented design of the Diamabrush hand tools prevents the tool from loading up or clogging, resulting in fast effective removal throughout the life of the tool..
Check Stock

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

Hilti 03490195 Cordless Compact Rotary Hammer Drill Kit, 18-volt

  • Application performance - Optimal concrete: 3/16 to 3/8 in.
  • Includes tool, (2) B 18 li-on 1.6 Ah CPC batteries, fast charger, TE-C 3/16 x 6, TE-C 1/4 x 6, TE-C 3/8 x 6 and soft tool bag.
Check Stock