Reviews Concrete Slab Leveling

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...tends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks.
  • Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack.
  • Not designed for use as permanent supports.
Check Stock

COSELLA DORKEN 600113 Underlayment, 3.5'X30'

  • Subfloor system for concrete and slab floors to keep moisture out.
  • Heavy duty, dimpled plastic membrane installed with the dimples down creates an air space above the slab.
  • Fully sealed vapor barrier prevents moisture from coming into the room, making the floor feel warm and dry.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 14 ft & 8 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 14’ and 8’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 12 ft & 10 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 12’ and 10’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

1 inch Diamond Drill Bit Concrete Diamond Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools

  • Industrial heavy duty, commercial quality, durable 1 inch core drill bits for concrete, exactly 1 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1 inch concrete core saw hammer drill bits for concrete.
  • Laser welded concrete hammer core bit fits your standard drill..
Check Stock

Sika, Sikaflex 1A, One Part Polyurethane Caulk, 10.3 Fl Oz, Color: Capitol Tan, Six Pack

  • Premium quality sealant, concrete self leveling caulk. No tooling required, levels itself. It is Water immersible & waterproof after cure.
  • PERFORMANCE: Self-leveling, pourable with permanently elastic and can be painted with water-based, oil-based or rubber-based paints. Able to bridge gaps up to 1.5 in. wide.
  • SUPPORTS: Excellent adhesion on concrete and cementitious slabs..
  • DURABILITY: High durability and resistant to ageing and weathering..
  • Ready-to-use premium quality sealant with elastic technology allowing for crack movement.
  • PERFORMANCE: Self-leveling, waterproof and textured to be blended with concrete surface..
  • SUPPORTS: Concrete and cementitious slabs, such as: driveways, garages, sidewalks, balconies, pavements, terraces, decks, walkways, steps..
  • DURABILITY: Resists aging and weathering..
  • Sika Backer Rod is inserted into a joint to control sealant depth and to prevent 3 sided adhesion.
  • DURABILITY: Good temperature resistance and will not absorb water..
  • PERFORMANCE: Partially fills deep cracks before sealant application. Oil and most other solvents resistant..
  • SUPPORTS: Ideal for glazing installations, expansion joints, window and door perimeters, copings, and pavement joints..
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

1 1/4 Diamond Hole Saw Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools 1-1/4 inch Diamond Drill Bit

  • Industrial heavy duty, commercial quality, durable core drill bits for concrete, exactly 1-1/4 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1-1/4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1-1/4 inch concrete core saw hammer drill bits for concrete.
  • Concrete hammer core bit fits your standard drill..
Check Stock

Sashco - 16210-12 Slab Concrete Crack Repair Sealant, 10.5 Ounce Cartridge, Gray (Pack of 12)

  • Moves with your concrete: Extremely elastic to move with your concrete through changes due to shifting soils, temperature, moisture, and traffic to create a weatherproof seal that banishes dandelions, anthills, and other unsightly crack dwellers..
  • Cuts down on repeated repairs: Just say no to brittle, cracked concrete repairs. In addition to extreme elasticity, Slab is specifically formulated with tenacious adhesion to concrete. This perfect balance of sticking and stretching translates into repairs that last for years, not just months..
  • Won’t stick out: Textured and colored to blend in with aged concrete for a seamless appearance..
  • Easy to use: Easy to smooth and clean-up with water. No special chemicals required..
  • OK to leave in your unheated garage overnight: Freeze-thaw stable through 10 cycles..
Check Stock

Sashco 16210 Slab Concrete Crack Repair Sealant, Gray, 10.5 Fl. Oz (Pack of 1)

  • Sold as “Sashco 16210 Slab Concrete Crack Repair Sealant, Gray, 10.5 Fl. Oz (Pack of 1)”.
  • Designed to withstand foot and vehicle traffic.
Check Stock