Reviews Concrete Screw And Anchor Assortment

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

amoolo 106pcs Concrete Anchors and Screws Assortment Kit for Drywall Concrete Wall Tile Ceramic Brick Cinder Block Etc with a Magnetic Screwdriver Bit and Masking Tape.

  • ...pacity】 Tungsten carbide drill bits with revolutionary pyramid design ensure hardness, resistance and drilling power. Industrial HCS screws are highly resistant to rust and corrosion. Nylon&PE compound material concrete anchors for higher strength and better resistance to aging..
  • -【Widely Applications】 The assortment kit includes most widely used sizes drill bits, concrete anchors and screws in home improvement. Satisfy all your demands on hanging pictures, paintings, mirrors, clock, photo frames, shelves, other small decorations on concrete walls, ceramic tiles, drywall, wooden wall, etc..
  • -【Warranty Policy】 If you are not fully satisfied for any reason, please contact us via amazon for 100% refund or replacement in 90 days..
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

CONFAST® #10-12 Plastic Conical Blue Bantam Drywall Wall Anchor Kit PAK1012 Includes 100 Anchors 100 Screws and 1 Drill bit 201 Pieces

  • Great for many light-duty uses - Install doorbells, curtain rods, pictures, light mirrors, photo frames, lights in drywall, plaster board, gypsum board, brick wall, concrete wall or wood wall.
  • Easy to Install - use included bit to drill hole, insert the anchor, and place the item against the wall over the anchor, then drive the screw through the hole in to the anchor.
  • Designed to prevent problems during installation - ribs prevent anchor from spinning in the hole while tightening the screw.
  • Plast Anchor material protects against rust and corrosion.
  • Contains ( 1 ) drill bit, ( 100 ) #10-#12 plastic, ribbed anchors, ( 100 ) #10 Phillips head screws.
Check Stock

Concrete Anchors and Screws Kit 100Pcs Masonry Anchors and 100Pcs Masonry Screws with 1Pcs Corresponding Bit Blue Conical Anchors and Self Tapping Screws for Stucco Concrete Masonry Brick Wall

  • Premium materials: All the concrete anchors and screws are made of durable materials,The concrete screws are made of carbon steel and galvanized, Will not rust or corrode. and the thick PE material anchor is not easily worn and aged.
  • Convenient Installation: The masonry anchors and screws kit come with corresponding size drill bit, You can use it to drill just the right size hole on the wall, then knock the anchor in, and finally screw the screws in, without you having to think extra about what size tool to use.
  • Commonly used size: The #10 concrete screws is 35mm long, the concrete anchors is 36mm,it's not too long and not too short,It's suitable for you mount stuffs such as doorbells, curtain rails, pictures, mirrors, photo frames and lanterns on brick walls, concrete walls, drywalls, wooden walls and more.
  • Well Packed: The wall anchors and screws kit are well organized by a exquisite plastic gird box,very space-saving,and very convenient for you to use and save the screws and anchors..
  • Package Content: 100pcs screws,100Pcs screw anchors,1 Drill Bit..
Check Stock

Akord Anchor Plastic Assortment Kit 130PCS, Nylon Mushroom Head, Wall Anchors and Screws for Drywall Anchors, Hollow Wall, Concrete Anchors, 2 Types & 8 Sizes Different Specifications, 65 Set

  • MORE SIZES AND CHOICES: Anchor Plastic Assortment Kit has 2 Types & 8 Sizes Nylon Mushroom Head Anchor. You will have different specifications anchors for hollow wall, which can solve different problems..
  • PRODUCT FEATURES: Constructed of high-quality materials for long-lasting durability. Can Be Hammered All The Way Into the Hole Without Pre-Expansion, Nylon Body Provides Insulation Between Drive Screw and Work Surface..
  • MULTI PURPOSE: Designed for Use in A Variety of Substrates Such as Concrete, Stone, Solid Brick, Solid Block, Hollow Brick, Hollow Block and Hollow Slab, Quick and Easy to Install and Remove..
  • HANDY BOX: All of the Anchors will be packed in a sturdy plastic box, can be used as a storage box. Not only give you the best Anchors, but also the best storage system..
  • 30 DAYS REFUND WARRANTY: AKORD offers a free replacement or refund against any manufacturer defects. Please feel free to contact us if you have any questions about our products..
Check Stock

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Plastic Wall Conical Anchors for use in Drywall, Hollow Walls and Concrete, Brick, or Masonry 10-12 X 1-Inch, 100-Pack

  • Horizontal fins prevent anchor from turning while screw is put in, Anchor expands and shims the screw.
  • For use in both hollow walls and concrete, brick, or masonry, Very high ease of use.
  • Also known as "Bantam" anchors. Kit Include a 100 #10-#12 blue anchors.
  • 1/4" Drill Size. Once anchor installed, they provide a flush, clean appearance in wall. Packaging design may vary..
Check Stock

VEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber

  • [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
  • (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
  • [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
  • Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
  • [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
  • Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
  • [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
  • 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
  • [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
  • Wooden posts and installation screws not included.
Check Stock