Reviews Concrete Block Production

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block

  • 6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block.
  • Cut the Hardest Materials: Hard Concrete, Cured Concrete, Reinforced Concrete, Concrete Block, Brick.
  • 17" Overall Length 14" Long Barrel Length.
  • Built for Pros who need the highest quality.
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

June Fox Walk Maker Concrete Molds for Stepping Stones Reusable Heavy Duty Paving Pavement Molds 13 inch x 13inch

  • ✅ Two pieces multiple Betonex Wooden Precast Diy Concrete Molds in one for the manufacture of concrete tiles that mimic old wooden boards.
  • ✅ Size of Paver Molds for Concrete Reusable - 15,75" x 15,75" x 1.97 "(40 x 40 x 5 cm)..
  • ✅ Patio Paving Pathmaker for walkways slabs "Board" is intended for the production of paving slabs from concrete by vibratory casting. Concrete....
  • ✅ Path Maker Footing Concrete Molds have two different textures. Large Big Hand Textured molds for concrete cobblestone can be used for casting....
  • ✅ With concrete molds and forms can produce more than 50 tiles for arranging garden paths. Paving mold concrete for drive way made in Ukraine..
Check Stock

12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor

  • MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Check Stock

Agri-Fab 45-0365 Push Spike Aerator, Black

  • Expose grass to air, nutrients, and water.
  • Steel weight tray holds concrete block, creates pressure and pushes spikes into ground.
Check Stock

Concrete Molds DIY Grass Concrete Paving Block Concrete Pavers & Paving Stones S62

  • Sold 1 piece Concrete Molds (FOTO 2) Grass Concrete Paving Block.
  • Size 19.68 in x 19.68 in x 2.36 in (500x500x60 mm) Mold is reusable.
  • The mold is made of ABS plastic thickness of 0.078" (1.9-2 мм) Depending on the geometry of the product wall thickness can form less than the above dimensions..
  • Perfect for parking areas in residential and commercial developments, Grass Concrete Paving Block is a great choice if you need a paving product that truly complements its surroundings..
  • This concrete paver is perfect for area that require detailed water management and drainage, need to withstand heavy traffic and abuse. Grow grass in the voids or fill them with gravel to allow rainwater to permeate through and help with areas that suffer from excessive rain water runoff. These pavers are recommended for creating attractive and functional paths, patios, courtyards, driveways and to create off street parking areas.
Check Stock

Set Parquet Molds Old Wooden Boards Concrete Mould Garden Stepping Stone Path Patio - Paver Molds for Concrete Wood Stamp Mold - Stampcrete Concrete Molds - Paver Molds for Concrete Cobblestone

  • The concrete wood mold in one for the manufacture of concrete tiles that mimic old wooden boards.
  • Size of concrete wood stamp mold - 11,75" x 11,75" x 1.2 "(30 x 30 x 3 cm)..
  • Concrete molds wood for paving slabs "Board" is intended for the production of paving slabs from concrete by vibratory casting. Concrete compaction is carried out on a vibrating table. This increases the strength and frost resistance of concrete..
  • Paver molds for concrete made from ABS plastic. Mold thickness 2 mm. Paver molds for concrete cobblestone can be used for casting plaster and concrete..
  • With stampcrete concrete molds can produce more than 50 tiles for arranging garden paths..
Check Stock

Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • ...ed design, built-in noise reduction, external sound insulation.
  • after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
  • 4 block is suitable for wooden soft base..
Check Stock