Reviews Concrete Blade For Miter Saw

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

NEIKO 10768A 12-Inch Carbide Saw Blade | 80 Tooth | 1-Inch Arbor | 5,000 RPM | for Use with Compound Miter Saws | Home Building, Construction, Woodworking Applications

  • [PRECISION]: The circular saw blades are carbide tipped to give great abrasion and heat resistance for a cleaner and smoother cut for greater efficiency and precision on your home improvement projects..
  • [COMPATIBILITY]: This miter saw blade has a 1-inch arbor and comes with a 20 mm arbor reducer for a tight and accurate fit..
  • [CUTTING EDGE]: The edges of this chop saw blade is designed to retain its sharp cutting edge and is ideal for providing a clean, precise cut on wood for home building and other projects, Do-It-Yourself (DIY) or industrial..
  • [RPM]: This saw blade can operate up to a maximum speed of 5000 RPM, allowing the carbide blade to execute clean cuts with ease..
  • [APPLICATION]: For use with a compound miter saw or chop saw, this blade can pivot left and right for angled cuts and perform beveled cuts if needed by manipulating the axes on the miter saw..
Check Stock

Astro Pneumatic Tool 936 Onyx Gear Driven Heavy Duty Air Saw

  • ✪ Cuts wood, brass & similar light materials with smooth, precise cuts.
  • no sanding needed! Cuts to a depth of 1/2 in. - ideal for frames and molding..
  • ✪ Make miter cuts from 0° to 45°.Fast 7800 rpm and a 3/8-Inch arbor. 2-Inch blade diameter and a .020 inch blade thickness..
  • ✪ This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials..
  • ✪ Has adjustable miter gauge, perfect for all your DIY projects! This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand..
  • ✪ This bench-top saw is so accurate that you might never have to file or sand ends! Compact size and portable.
  • easy to use for cutting metal, aluminum, copper, plastic and wood!.
Check Stock

Metabo HPT Sliding Compound Miter Saw | 10-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C10FSHCT

  • INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench.
  • POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place.
  • MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility.
  • COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance.
Check Stock

DEWALT Miter Saw, 12-Inch, Double Bevel, Compound, XPS Cutline, 15-Amp (DWS716XPS)

  • Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade..
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence..
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree.
  • 0 degree - 50 degree left and right miter capacity.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles..
  • LED work light system provides adjustment-free cut line indication for accuracy and visibility..
Check Stock

Saw

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

VIYUKI Tile Cutter Saw Portable Wet Cutting Porcelain Tile Cutter Table Saw 7-Inch Wet Tile Saw

  • Tile Saw Wet Product Parameter: 120V/60Hz/5A/7" Blade x2, and easy-to-use perfect for any DIY home projects..
  • Wet Tile Saw 7 inch High-quality tool: Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Professional Blade water cooling system: Tile saw blade 7-inch wet saw, keeps the blade cool and minimizes dust and debris. The panel of the machine is stainless steel to prevent rust..
  • Professional induction motor - supply generates up to 3,560 RPM..
  • Pack your satisfaction with the quality: Wet tile saw with a manufacturer warranty you can be sure you will get a quality tile saw.we will supply a new one with any flaw on the package or some quality problems..
Check Stock

S SATC Saw Blade 4 1/2 Circular Saw Blades 100 Teeth Circular Saw Blade for Cutting Soft Metals Wood Plastic Stainless Steel

  • [Sharp Enough]: The circular saw blade with high-density carbide teeth is designed for cutting soft metal and withstands impact, reduces wear and lasts up to longer service life, no warping..
  • [Long-lasting for Use]: Manufactured with durable high-quality alloy steel, this 4 1/2 circular saw blade is hardened, fully polished and chrome-plated with sharper tungsten carbide teeth for durable cutting of wood, plastic, steel, ferrous metals, composites..
  • [Outstanding Performance]: 100 teeth contained, the miter saw blade makes the best smooth, razor-sharp finish cuts in unit time than other blades with the same size, easy, fast, and precise as expected..
  • [Practical Design]: Laser-cut kerf that maximizes the accuracy of the cut while reducing noise and vibration during operation and the unique design which improves airflow, helps to dissipate heat and removes cutting dust both guarantee you a quiet and efficient work environment..
  • [Perfect Fit]: Saw blade set is ideal for machines that will take a 4 1/2 inch blade, specially for 4 1/2 miter saws and slide miter saws..
Check Stock

Shop Fox W1888 10\ Hybrid Table Saw With Riving Knife, White

  • The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
  • Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
  • Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
  • The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
  • For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
  • The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock