Reviews Compression Driver

DS18 PRO-DRNEO 2\ Throat Bolt On Neodymium Compression Driver 3\ Titanium Voice Coil 800 Watts 115dB 8-Ohm (Single)

  • DS18 designs its Compression Drivers with aluminum horns to make sure they are above and beyond the standard high frequency driver/tweeter/horns in the market. These bad boys give so much clarity to their frequencies that any audio enthusiast would believe their whole sound system is ready to deploy for a major concert..
  • PEAK POWER HANDLING - At 800W Max and 600W RMS the PRO-DRNEO neodymium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love..
  • TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
  • NEODYMIUM MOTOR STRUCTURE - Provides the most motor force of any other driver motor on the market. Intense high frequency loudness without sacrificing sound quality..
  • USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 3" (101.6mm) TPI threading, which allows it to work as a replacement driver for many popular horns..
Check Stock

Timpano TPT-DH2000 2 Exit Compression Driver + Horn 450 Watts Max Power 8 Ohm 109 dB Slim Profile Aluminum Horn + Ferrite Driver

  • Shallow Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn..
  • Designed for efficiency: This driver was made for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm..
  • Solid Structure: The titanium diaphragm with a 2 inch voice coil is designed for long lasting playing.
  • Easy to Install: The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn.
  • Quality You Can Trust: Timpano TPT-DH2000 2” Driver + Slim Horn 450 Max Watts 8 Ohm, PRO Audio Titanium Ferrite Compression Driver with Aluminum Horn is perfect for car door installation.
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

DS18 PRO-DRN2 3” VC Compression Driver with Neo Magnets - 680W Max, 340W RMS, 8 Ohms, Set of 1 Tweeter

  • 3" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, Kapton voice coil and a ferrite magnet make these the best drivers available..
  • PEAK POWER HANDLING - At 680 Max and 340W RMS the PRO-DRN2 compression driver boasts out-of-this-world power handling for a Pro audio sound you will love..
  • HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 38oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes.
  • 8 OHM IMPEDANCE: This car tweeter has 3” flat aluminum voice coil, 106 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • DURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment..
Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • Features: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M....
Check Stock

(2) JBL JRX225 Dual 15\ Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225

  • Features: JBI JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
  • Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
  • SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
  • Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
  • Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low....
Check Stock

Pyle PDS772 2.84-Inch Titanium Horn Driver 8 Ohm 13/8-Inch x 18 TPI

  • 300 Watts RMS / 600 Watts Peak Power Handling - 50 oz. Magnet Structure.
  • Midrange / Tweeter Compression Driver - 2.84'' (72.2mm) Flat Aluminum Voice Coil - Titanium Diaphram.
  • Sensitivity (1w/1m): 107dB SPL - Frequency Response: 500Hz ~ 18kHz.
  • Midrange/Tweeter Compression Horn Driver.
  • Titanium Diaphragm, 2 Flat Aluminum Voice Coil.
Check Stock

2\ Inch Titanium Horn Driver - 600W High Power Car Audio Midrange/Tweeter Compression Horn Driver System w/ Aluminum Voice Coil, 1.5kHz ~ 18kHz Frequency,102dB, 8 Ohm, 13.5oz Magnet - Pyle PDS541

  • 600 WATT POWER: This high powered audio projection midrange/tweeter system has a maximum power output of 600-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 1.5kHz-18kHz FREQUENCY RESPONSE: The car tweeter compression driver has a frequency response of 1.5kHz ~ 18kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction. Fits horns w/ 1 3/8" x 18 TPI threads.
  • 8 OHM IMPEDANCE: This car tweeter has 2" flat aluminum voice coil, 102dB @ 1W/ 1M, & 8ohm impedance rating that compensates the undersized wire found in most cars. Reduces distortion so you can enjoy crisp & clear sound.
  • 2” TITANIUM DIAPHRAGM: PylePro follows the standard size for most car stereo systems & created this midrange/tweeter compression horn driver with 2-inch titanium diaphragm. This high power tweeter compression horn will get you higher than high.
  • 60 OZ MAGNET STRUCTURE: These tweeters have a 60 oz magnet structure. The heavy-duty housing provides a strong foundation & is easy to install to your car's sound system. Provides crispest, most accurate highs possible w/ modern speaker technology.
  • Midrange/Tweeter compression horn driver.
Check Stock

Audiopipe Chrome ATR series 350 max watt tweeter (pair)

  • 6-INCH COMPRESSION DRIVER: High-output compression driver kit that delivers a crisp, clear sound while balancing out bass-heavy car audio systems.
  • HEAR EVERY NOTE: Hear every beat, word, or bass line with a sensitivity of 110db and an impedance of 8 ohms.
  • NO SEPERATE FREQUENCY DRIVERS: Powerful ferrite motor and titanium diaphragm can handle concert-level sound at midrange and high frequencies with a response of 1,000 to 20,000 Hz.
  • QUALITY OUTPUT: Non-resonant cast aluminum horn controls dispersion for high efficiency right where you want it.
  • DURABLE MATERIALS: Heavy-duty, durable aluminum horn, 2-inch Kapton voice coil, and 33-ounce magnet keep pumping out sound for years to come.
Check Stock

(2) JBL JRX215 1000w 15" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer

  • ... RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres. : JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil.
  • JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
  • 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50.
  • Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.....
Check Stock