Reviews Compression Angle Stop Valves

RIDGID 27023 Model 2002 One Stop 2-in-1 Wrench for Angle Stops, Straight Stops, and Compression Couplings

  • ONE STOP WRENCH: Provides the exact size wrench needed to install angle stops, straight stops, compression couplings, making it perfect for working with supply lines and shut-off valves.
  • 2-IN-1 TOOL: Features a 15/16-in. open-end wrench, a 9/16-in. open-end wrench, and an open-end 12-point box-line wrench in one tool to make plumbing work quick and easy.
  • EFFICIENT GRASPING AND TIGHTENING: Smaller wrench allows you to grasp riser nuts in twice as many positions while the larger wrench tightens compression nuts.
  • COMPACT DESIGN: Allows you to conveniently store the smaller wrench inside the larger wrench’s tubular body and simply unscrew to remove it when it’s time for use.
  • MULTIPURPOSE: Ideal for a variety of other installation tasks including appliance legs, showerheads, faucet nuts, and toilet bowls.
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers

  • 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
  • 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
  • Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
  • 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
  • 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

Brass Pipe Fittings, Water Hose Adapter, G 1/2 Female to G 3/8 Male Reducer Adapter, Compression Fitting for Kitchen Bathroom Faucet, Pipe Connector with Rubber Washer,(2 Pack)

  • ...NDARD SIZE】G 1/2 female x G 3/8 male adapter is regular US size, suitable for most pipe size with 3/8" converting to 1/2" angle stop. Solve the connection problem between the old shutoff valves and the modern faucet supply line. G 3/8 Male OD: 0.54 inch(13.8mm).
  • 【NO LEAKAGE】Compression adapter comes with rubber seal gasket, just tighten with the gasket provided and no leaks. No Teflon tape needed. As a converter, be threaded easily onto angle stops, connect your flexible water lines..
  • 【WIDELY APPLICATION】Our faucet supply line adapter can be used in the kitchen, bathroom sink, dishwasher, hot water heater, etc. It is a perfect adaptor for 1/2 to 3/8 faucet hose, which will save you the hassle of replacing the valve..
  • 【STURDY AND DURABLE】Water hose adapter is made of high-quality brass material and was treated with premium nickel coating. Solid, anti-corrosion, rust-proof, and high-temperature resistance(withstand up to 100°C / 212°F) features fit faucet hot and cold supply lines..
  • 【SAFETY】The material of pipe compression fitting adapters are harmless, complied with safety regulations, so they can be used for drinkable water pipes. Enable you to quickly connect a kitchen faucet without having t....
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

EZ-Fluid 1/2\ Nominal Comp (5/8\OD Comp) x 3/8\ OD Comp 1/4Quarter Turn Handle Chrome Brass Angle Stop Valve Water Shut Off Ball Valve For Water Pipes Lead-Free, For Faucet,Toilet, Sink Valve (10Pcs)

  • Chrome Brass Water Shut Off Valve ,Angle Stop Valve Use for Faucet Water Valve and Toilet Water Valve.
  • Pack of 10 Pcs Angle Stops Contractor Pack.
  • EZ-Fluid Quarter 1/4-turn Handle Angel stop valves Compatible with copper or Pex Water Pipes (PEX installations require Plumbing Pex tube insert Pex fittings) ,also Available in Pex Valve.
  • 5/8" OD Comp x 3/8" OD Comp angle stop ball valve Fits 1/2" Copper Pipe, it supplies Hot Cold Water For Faucet,Toilet water supply line and faucet supply line Great choice use as Toilet Valve,Faucet Valve.
  • EZ-Fluid Angle Stop Valve 1/2 Nom. (5/8" OD Comp)x 3/8" OD Comp Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953.
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

1/2\FIP Iron Pipe x 3/8\ OD Comp x 3/8\ OD Comp Dual Handle 3 Way Angle Stop Water Shutoff Ball Valve, Lead-Free

  • 1/2" FIP by 3/8" OD by 3/8" OD Dual Handle 3 Way Angle Stop Valve , Lead-Free.
  • Still allowing water to be supplied to another source.
  • Allows you to turn off water to one source.
  • Ideal for kitchen with more than one appliance requiring water.
Check Stock

Refrigerator Icemaker Water Solenoid Valve for Whirlpool Kenmore

  • Replacement for numbers AP3103467, PS358631, 2315576, 2315508, 2210436 and 2181702.
  • This Ice Maker Valve fits specific Whirlpool manufactured Side by Side Refrigerator models including Kitchenaid, Roper, Estate, Kirkland & Kennmore.
  • This valve is designed to replace a wide variety of single coil valves.
  • The valve has: 1/4″ male compression inlet. (Can be retro fitting from original garden hose type connection if present with fittings provided) 1/4″ male compression outlet is printed on the sticker of the valve & this is a replacement for and valves.
  • Included is Compression Union, Nut, Sleeve, Mounting Bracket, Screws and Tubing Inserts.
Check Stock