Reviews Compressed Air Dryer For Sandblasting

#120 Aluminum Oxide - 8 LBS - Fine Sand Blasting Abrasive Media for Blasting Cabinet or Blasting Guns.

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Air Conditioner Waistcoat Vortex Tube Compressed Welding Steel Air Cooling Safety Vest

  • Suitable for high temperature, high fever, high humidity, specially for cold labor protection environments. Such as metallurgy, forging, welding, glass, fire, petroleum, power plant, boiler plant, sandblasting, paint baking, and so on..
  • Enter the amount of compressed air 10, 15, 25, and 35 SCFM (280, 420, 700, 990 SLPM).
  • can produce up to 2500 Btu / H (630 Kcal / H) cooling capacity..
  • Only manual knobs and adjust the air outlet temperature thermometer. If the compressed air inlet pressure and temperature remain constant, the outlet temperature of the vortex tube will be kept within the range of ± 1 ° F (± 0.6 ° C) for sustained..
  • No need to clean up the residue without cleaning components..
  • Instant on / off, easy to control, cooling does not produce any waste..
Check Stock

Air Conditioner Waistcoat Vortex Tube Compressed Welding Steel Air Cooling Safety Vest

  • Suitable for high temperature, high fever, high humidity, specially for cold labor protection environments. Such as metallurgy, forging, welding, glass, fire, petroleum, power plant, boiler plant, sandblasting, paint baking, and so on..
  • Enter the amount of compressed air 10, 15, 25, and 35 SCFM (280, 420, 700, 990 SLPM).
  • can produce up to 2500 Btu / H (630 Kcal / H) cooling capacity..
  • Only manual knobs and adjust the air outlet temperature thermometer. If the compressed air inlet pressure and temperature remain constant, the outlet temperature of the vortex tube will be kept within the range of ± 1 ° F (± 0.6 ° C) for sustained..
  • No need to clean up the residue without cleaning components..
  • Instant on / off, easy to control, cooling does not produce any waste..
Check Stock

Sand Blaster Abrasive Blaster Portable Power Sand Blasting Kit for Removing Paint, Stain, Rust, Compatible Pressure Sand Blaster (Blue)

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Air Conditioner Vest Vortex Tube Personal Compressed Air Cooling Waistcoat Body Safery Cooled Conditioning Clothes for Women Men Black for Work

  • This air conditioned vest for a variety of high temperature operating environment: shipyard, foundry, boiler workshop, steel plant, glass factory, power plant, forging workshop, welding operation, coal mining, metal smelting, sandblasting, paint baking operation, cold storage, smelter, ore, asbestos removal, hazardous waste removal and so on..
  • This vortex cooling vest need to be equipped with air compressor (air pump) access to compressed air through the principle of eddy current cooling, can produce pure air-conditioning. No electricity without chemical safety and environmental protection. As long as there is compressed air can work continuously, and can adjust the air pressure through the control valve size, to achieve the appropriate temperature cooling, welding and other workers at high temperatures the ideal cooling artifacts..
  • The product has low noise, high hardness, wearproof, light, drop, high pressure air pressure, safety and explosion characteristics. Pure physical principle of work, long life, safe and reliable, good cooling effect, connected to the compressed air instantly can produce 0-28 degrees air conditioning..
  • Safety tips: air conditioning vest can only take high pressure air, prohibit the use of oxygen and other flammable and expl....
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 3/4 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 1/2 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

Welding Steel Air Compressed Cooling Vest Welders Compressed Air Cool Waistcoat Vortex Tube Welding Work Air Conditioner Vest (US STOCK)

  • ★Cooling vests which use vortex tube cooling air can be generated by adjusting the 30-degree temperature difference between the upper and lower air-conditioning, and then through a hose to cool air delivered to all parts of the vest, so that users feel cool and comfortable. Thereby increasing labor efficiency and production safety..
  • ★The opening neckline provide continuous and comfortable cold air flowing for the neck and face, allowing the cooling air with all-round movement, no restrictions and the temperature can be adjusted freely..
  • ★No electricity, freon or chemical refrigerant, only filtered compressed air for industrial use. No danger of sparks flash, no wireless/radio frequency interference. No need to clean up the residue without cleaning components..
  • ★Enter the amount of compressed air 10, 15, 25, and 35 SCFM (280, 420, 700, 990 SLPM), can produce up to 2500 Btu/H (630 Kcal/H) cooling capacity..
  • ★This item is suitable for high temperature, high fever, high humidity, specially for cold labor protection environments inlcuding metallurgy, forging, welding, glass, fire, petroleum, power plant, boiler plant, sandblasting, paint baking and so on..
Check Stock

Eastwood EW 100lb Pressure Abrasive Blaster

  • [APPLICATION]: This air sand blasting gun in handheld and useful for a variety of needs, which include etching mirror and glass, removing metal rust, paint, oil, oxidation, grime and stains such as dirt from tiles and grout to be the perfect companion for home improvement work..
  • [VERSATILE]: The handheld grip is ergonomic, lightweight and portable, which makes sandblasting versatile for both industrial heavy-duty work such as paint stripping and home appliance maintenance like rust removal..
  • [COMPATIBILITY]: The gravity feed hopper accepts multiple types of media including silicon carbide baking soda, sand, aluminum oxide beads, glass, and walnut shells to blast away a variety of unwanted surfaces..
  • [POWER]: The pressurized compressed air from an air compressor powerfully accelerates gravity fed abrasive media through the 5.0 mm, 2-15/16” x 7/32” diameter nozzle to cover a greater surface area and profile..
  • [SPECIFICATIONS]: Operating pressure: 90 PSI, Air consumption: 7 SCFM, sand recommendation: aluminum oxide (#46 - #100)..
Check Stock

KwikSafety (Charlotte, NC) UNCLE WILLY’S WALL Safety Vest (10 POCKETS) Class 2 ANSI OSHA High Visibility Reflective Camo Heavy Duty Mesh Zipper HiVis Construction Work HiViz Men | Yellow Black Medium

  • Cooling Vest---Gas flow rates up to 35 SCFM (990 SLPM). Cooling power up 2500Btu / H (630 Kcal / H, at 100psi pressure power is 2800BTU / H, 821Kcal / H)..
  • Temperature Can Adjust---Only manual knobs and adjust the air outlet temperature thermometer. If the compressed air inlet pressure and temperature remain constant, the outlet temperature of the vortex tube will be kept within the range of ± 1 ° F (± 0.6 ° C) for sustained..
  • Industrial Use---No need to clean up the residue without cleaning components. No electricity or chemical refrigerant, only filtered compressed air for industrial use..
  • Easy Use---Instant on / off, easy to control, cooling does not produce any waste..
  • Widely Use---Suitable for high temperature, high fever, high humidity, specially for cold labor protection environments. Such as metallurgy, forging, welding, glass, fire, petroleum, power plant, boiler plant, sandblasting, paint baking, and so on..
Check Stock