Reviews Composite Steel Pipes

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

JOBYNA Electronic Water Descaler System, Alternative Chemical and Salt Free Water Softener Systems Whole House, Prevents Scale Build-up in Pipe, 3 Installation Methods, Works with All Pipes

  • ...: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
  • 【APPLICABLE TO ALL PIPES】The size of 2 copper coils is 39.4''×0.4‘’. The whole house descaler works all pipes, including iron, copper, plastic, stainless steel, even PVC, composite pipe, PE-X, etc. and suitable for pipes of 0.5-2 inches in diameter. Operating voltage is 110-120V..
  • 【100% MONEY BACK GUARANTEE】The scaleblaster water conditioner is a power-efficient system, costing only 36 cents per month on electricity. Safely descale water and prevent lime build-up completely risk-free. Should you not be satisfied with the product's performance, you have a whole year to return it for a full refund!.
Check Stock

PVC Pipe Cutter, One-hand Ratchet Pipe Cutting Tool for PVC/PPR/PEX/Rubber Hose Cut up to 42mm, Plastic Pipe Tubing Cutter with Replacement SK5 Steel Blade, No Burrs

  • 【Robust and Advanced Design】: Durable aluminum construction for heavy duty use. Ergonomic soft handle grip for reducing hand fatigue for long time working. Locking mechanism for safe storage..
  • 【Quick-change blade mechanism】: Plastic pipe cutter comes with a replacement 'V' shaped blade. High Hardness SK5 carbon steel sharp blade reduces tube deformation..
  • 【Ratchet drive Design】: The professional PVC cutter adopts self-locking ratchet design. The ratchet drive greatly enhances the bite force.It can prevent the cutter from springing back, and cutting is sharp, fast, safe. It was designed to make cutting pipes easily..
  • 【High Cutting Capacity】: The Pipe Cutter blade for cutting most plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multi layer pipes. the cutting capacity up to 1-2/3”(42mm) outside diameter..
  • 【Wide Application】: Suitable for plumber,professional maintenance staff,electrician and car maintenance master as well as daily home,decoration. Pipe shears is an ideal choice for cutting all kinds of plastic pipes and multi-layer composite tubes ..
Check Stock

KOLERFLO 115V Water Recirculating Pump 3/4 Inch Circulating Water Pump for Water Heater System(RS15-6 Blue)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circ....
Check Stock

KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulat....
Check Stock

KOLERFLO 3/4 Inch 110V Circulating Water Pump Hot Water Circulation Pump/Circulator Pump for Hot Water System(RS15-6 Green)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circ....
Check Stock

POWERENG 115V Hot Water Circulating Pump 3/4" NPT 3-Speed Hot Water Recirculating Pump for Solar Heater/Faucet (Blue)

  • 1.Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • 2.Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • 3.Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • 4.The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • 5.POWERENG circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot wate....
Check Stock

ALDIOUS Electronic Water Descaler System for Whole House, Water Softener Scale Remover, Salt-Free Hard Water Conditioner, Limescale and Rust Removal, 3 Installation Methods, Works with All Pipes

  • ...: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
  • 【APPLICABLE TO ALL PIPES】The size of 2 copper coils is 39.4''×0.4‘’. The whole house descaler works all pipes, including iron, copper, plastic, stainless steel, even PVC, composite pipe, PE-X, etc. and suitable for pipes of 0.5-2 inches in diameter. Operating voltage is 110-120V..
  • 【ADVANTAGES】Pulse bands works great in this new technology since it has a larger working area for all kinds of piping works. Keep the minerals which are great for our body. No salt, No chemical involves into your water, No PH changes too compare to the Water Softener. Super cheap and maintenance free..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock