Reviews Compatible With Cnc

BW USA Rock Garden Flat Pedal - SPD Compatible Clipless MTB Bike Pedals - Black

  • DURABLE CONSTRUCTION - Constructed with a lightweight and durable CNC machined 6061 aluminium body..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT - At just 180g each, these pedals weigh less than many higher priced competing models..
  • SPD COMPATIBLE - Duel-sided SPD compatible binding system. Includes SPD compatible cleats..
Check Stock

BW USA Rock Garden Combo Pedals – Dual Sided MTB Platform and SPD Compatible Bike Pedals

  • VERSATILE - Clipless binding system on one side with a generous sized platform on the other provides for a versatile mixed use pedal..
  • SPD COMPATIBLE - Single-sided SPD compatible binding system. Includes SPD compatible cleats..
  • DURABLE CONSTRUCTION - Constructed with a lightweight and durable CNC machined 6061 aluminum body..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
Check Stock

Daedalus 3018 CNC Upgrade Kit, for X-Axis Upgrade & Y-Axis Extension

  • Extend your 3018 CNC Y-axis from 290 mm to 450 mm, get a 320*450mm Basic Area, 320*370mm Movement Area, 300*320 Actual Stroke..
  • Upgrade your 3018 CNC X-axis with a aluminium knob, save your hand from gettting dirty when trying to turn the screw by hand. Pls kindly to know that it DOES-NOT extend the X axis..
  • Compatible with most 3018 Pro series CNCs, 3018 Pro, 3018 Pro Max, etc. And pls note that your 3018 CNC should be equipped with ∅8 mm T8 lead screw, ∅10 mm guide rail, and no counterbore on the End Plates for Rails..
  • Easy to Assembly. And great value to upgrade your 3018 CNC and get a bigger one..
  • Longer limit switch cable for the Y axis is required. The original limit switching cable may not be long enough..
Check Stock

Genmitsu 4 Pack Hold Down Clamp Kit, CNC Router Clamp for Woodworking and Metalworking, 3-7/20''L x 4/5'' W x 2-7/10''H, Compatible with CNC Router Machine PROVerXL 4030 &3040 Extension Spoilboard

  • Feature: This clamp can be used on a T-Slot Aluminum Spoilboard, and also can be used on Threaded MDF Spoilboard with pre-installed threaded holes (4mm (0.16'')) . Compatible with Genmitsu PROVerXL 4030 CNC router kit, 3040 Extension Spoilboard, as well as other large CNC machines. Just make sure the size of T-Slots/ holes on your Spoilboard can be compatible with this clamp..
  • Dimensions: This clamp is 85mm length x 20mm width x 68mm height. (3-7/20''L x 4/5'' W x 2-7/10''H)..
  • Working range: This clamp accommodates material up to 35mm (1.38'') thick and holds it firmly in position. It can hold a variety of materials for desktop CNC router machines..
  • Sturdy Quality: Constructed of High Strength Cold Rolled Sheet for durability and wear resistance..
  • Versatility: This clamp provides exceptional clamping forces for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

HGC 1.0' Compatible Pad For 1.5 Inch CNC Sprocket Adaptor For 1.5' Adaptor 1.5' Hub 60cc 66cc 80cc Motorized Bike (Silver)

  • Fit 1.5 Inch CNC Adaptor 1.5 Hub Motorized Bike.
  • Package Include: 1 x Compatible Pad for 1.5 inch CNC Sprocket Adaptor.
  • Made from the high quality materials available. Good performance with competitive price..
  • More Choices--with this pad, you are free to get any 1.5-inch CNC adapter even though the rear hub of your motorized bicycle is 1 inch..
  • Replacement for original part. Please check part comparibility to see if it fits your model..
Check Stock

PACEWALKER Baking Paint 1 Pair Motorcycles Slash Cut Exhaust Muffler Pipe for 1-3/8\

  • Featuring large 4-inch mufflers finished with raceinspired CNC machined billet end caps, Eliminator 400s are tuned to give compatible with Harley-Davidson baggers a deep and aggressive roar..
Check Stock

42 Motor 1.5A 17HS4401S with TB6600 Stepper Motor Driver NEMA17 23 for CNC and 3D Printer

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
  • 【Package Included】 Comes with everything you need. This engraving machine set included all parts to assemble 4540 cnc machine, integrated controller box, touchscreen cnc offline controller, Z-probe, CNC router bits, English manual, and more. We also provide a 1-year warranty and fantastic after-sales serv....
Check Stock

FoxAlien 4040-XE CNC Router Machine 300W Spindle + 20W Laser Module Kit

  • This bundle includes a FoxAlien 4040-XE cnc router machine and a 20W laser kit..
  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000..
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software..
  • The FoxAlien 20W engraving module features a new technology "light beam compression", which have excellent performance in engraving delicate jobs and details..
  • The focus distance is fixed by 30mm. The package includes a positioning block for easy focusing. Electrical output: 20W.
Check Stock

Lenink 4 Pack Mini T Track Hold Down Clamps, T-Track Clamp Compatible with 3018-PRO,3018-MX3,3018-PROVer,1810-PRO CNC Router Machine

  • Compatibility: The T-Track clamp kit is compatible with 3018-PRO/3018-MX3/3018-PROVer/1810-PRO CNC router machine, it can hold most of the materials of a desktop CNC router machine.
  • Portable and Practical: Adjustable T Track hold down clamps are very easy to install, can accommodate 30mm materials and hold them firmly in place.
  • Wide Range of Use: Not only suitable for 3018 series desktop CNC router machines, but also suitable for positioning and fixing other woodworking or metalworking, such as drill presses, CNC, table saws, routers, jigs, vertical milling machines, etc.
  • Strong and Sturdy: Made of high quality zinc-aluminum alloy, strong and wear-resistant, long service life.
  • Packaging Includes: 4 Pcs T-Track hold down clamps (Need to assemble by yourself). 6 months super long warranty period.
Check Stock