Reviews Communication Module

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

  • This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
  • Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
  • For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
  • A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
  • Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..
Check Stock

Renogy BT-2 Bluetooth Module RJ45 Communication Port Wirelessly Monitor Real-time Insight Precise Control Compatible Solar Charge Controllers Battery Charger Inverter BT-2 RS485

  • 【Precise Control Over Your Devices】 Compatible with all Renogy RS485 communication port products includes the Rover Elite MPPT Solar Charge....
  • 【Real-time Insight】 Get real-time and historical data via Bluetooth Module and Renogy DC Home App. Bluetooth 4.2 and BLE technology provides fast....
  • 【User-friendly】 Easily connect the Bluetooth Module to the RS485 communication port, and follow the App instructions. The Bluetooth Module is....
  • Connect the BT-2 to the component's RJ45 communication port to wirelessly check and adjust your system's parameters through the DC Home App (available....
  • Fully control the solar power generation, energy storage, and inverters' real-time operation data by monitoring from the DC Home App..
Check Stock

Honeywell LYNX Touch 5210 4.3\ All-in-One Wireless Home and Business Alarm Control System

  • ... set points Four door locks – Jammed locks reported to Honeywell Total Connect Remote Services 40 devices such as lights, switches and lamp modules 20 scenes 20 rules or event-based actions 20 schedules or time-based actions Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices.
  • Honeywell 3GL Communications GSM radio (SOLD SEPARATELY - NOT INCLUDED) – protocol supports AT&T and Rogers networks ADEMCO Contact ID Reporting (four or ten digit account numbers) SIA Format Reporting Internet central station communication with L5100-WIFI or ILP5 module GSM cellular central station communication with internal GSM radio Selection for primary communication path when using dual paths Touch activated radio registration GSM radio signal strength display Two-way voice communication over POTS, IP/Wi-Fi or GSM Honeywell Total Connect ready Alarm Output Built-in 85 dB sounder with voice siren Steady output for burglary/panic Temporal pulse output for fire and carbon monoxide alarms Long range radio/audio alarm verific....
Check Stock

Fortin EVO-GMT5 Stand-Alone Add-On Remote Start Car Starter System For GMC Full Size Vehicles

  • The EVO-ALL is an ALL-IN-ONE data immobilizer bypass and door lock interface combo module.
  • It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • 2-way Data-Link port for serial communication with compatible remote car starters and also includes analog plug for compatibility with non 2-way....
  • Multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • For full functionality, installation manual, and to see if this module is compatible with your vehicle please go to Fortin's web site.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

Honeywell YTH6320R1001 Redlink Wireless Focuspro Thermostat Kit, 2 Packs

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

Honeywell YTH6320R1001 Wireless Focuspro Thermostat Kit, Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

UMLIFE 3PCS 6DOF 6-Axes Sensor Module Gravity Sensor GY-BMI160 Module Accelerometer Gyroscope Acceleration Gravity Sensor IIC I2C 3-5V for Arduino

  • Communication: standard IIC communication protocol.
  • ✹✹This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package..
  • ✹✹The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data..
  • ✹✹In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices..
  • ✹✹3PCS 6DOF Bosch GY-BMI160 Module 6-axis Acceleration Gyro Gravity Sensor for Arduino.
Check Stock

2 Pieces MPU-9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor I2C SPI 3-Axis Gyroscope Accelerometer Magnetometer Sensor Module

  • Basic information: module model: GY-9250.
  • Power supply: 3-5V (internal low dropout voltage regulator).
  • Communication: standard IIC communication protocol.
  • Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
  • Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
  • The 16-bit AD converter is embedded in the chip, with 16-bit data output.
  • Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
  • Applications: DTV and set-top boxes are applied to internet connection.
  • Wearable sensors are applied to fitness equipment and sports.
Check Stock