Reviews Common Interface

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

Zunate LGA1366 Motherboard, Computer Motherboard X58, Integrated 6 Channels Sound Card, RTL8111F Gigabit Network Card, DDR3 1066/1333/1600MHz,REG, ECC for X 58 Chipset, SATA 2.0 for i7 Series

  • ...k card dual indicator designed,stable use of high-speed network.Seven phase enhanced power supply designed, more stable and visible than three-phase power supply motherboard..
  • 【Multiple Expansion Slot】This PC Motherboard with 1XPCI-E×16 graphics slot, 1XPCI-EX 1 slot, 4 × USB 2.0 slot (2 groups), 4 × SATA 2.0 interface,PS/2 interface, PS/2 keyboard and mouse interface, 1 × RJ45 network interface,audio interface.
  • power socket : 24pin+8 (when just 4 pins are connected to the center of the board).
  • 【Memory & Battery】 The Desktop Computer Motherboard LGA 1366 Support common memory and server memory, common memory and ECC server memory cannot be mixed at the same time.Built-in lithium manganese button battery CR2032 3V 240mAh, long service life..
  • 【100% Satisfaction Guarantee】This LGA1366 Motherboard has a complete after-sales service, If you have any questions about the product or you are not satisfied,please contact us at any time, we will provide you with the best solution.Your satisfaction is our main concern..
Check Stock

Dell Networking N1524 - Switch - 24 Ports - Managed - Rack-mountable, Black (463-7254)

  • Energy-efficient Ethernet and low-power physical layer (PHYs) to help reduce power to inactive ports and idle links.
  • One common command line interface (CLI) and graphical user interface (GUI) that use a well-known command language to help skilled network administrators become productive quickly.
  • USB auto-configuration that helps network administrators rapidly deploy mirrored configurations to numerous devices by simply inserting a USB key.
Check Stock

AOICRIE 2PCS MAX7219 Dot Matrix Module for Arduino Microcontroller 4 in 1 Display with 5pin Line for Arduino for Raspberry Pi (Green)

  • ★The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
  • ★The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
  • ★Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
  • ★Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
  • ★The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..
Check Stock

Dell Networking N1524P - Switch - 24 Ports - Managed - Rack-mountable Black 463-7265

  • Energy-efficient Ethernet and low-power physical layer (PHYs) to help reduce power to inactive ports and idle links.
  • One common command line interface (CLI) and graphical user interface (GUI) that use a well-known command language to help skilled network administrators become productive quickly.
  • USB auto-configuration that helps network administrators rapidly deploy mirrored configurations to numerous devices by simply inserting a USB key.
Check Stock

ALAMSCN MAX7219 Dot Matrix Module 32x8 4 in 1 LED Display Modules for Arduino Raspberry Pi Microcontroller with 5Pin Wires Red (Pack of 2)

  • The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
  • Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
  • Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
  • The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
  • The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..
Check Stock

6Ft Long USB-2.0 Cable Type-A to Type-B High Speed Cord for Audio Interface Midi Keyboard USB Microphone Mixer Speaker Monitor Instrument Strobe Light System Laptop Mac PC Type A to Type B

  • 【 MIDI Host Box 】 Provide 1-in and 1-out interface, convert the USB MIDI device interface of a musical instrument into a common 5-pin MIDI....
  • 【 Compatibility 】 This MIDI Host Box is suitable for full-speed USB MIDI interface (USB1.1/USB1.0),.
Check Stock

TechIntheBox 3 Ports OTG Cable Adapter,Micro USB Hub USB OTG Extension Adapter for Smartphone and Tablet Simultaneous Charging Power Transmisson Cable Black

  • 1. Small, lightweight and easy to carry. Just as the size of a pen shape, easy to carry, not the space. Micro USB interface, support hot-hot-plug....
  • 2. Supports OTG function and charge electricity. Compatibility, support for Android, win8, win7, Vista, XP, window 2000, ME, Linux and other operating....
  • 3. The mobile tablet are applicable, support Micro USB port phones, tablet PCs have OTG function, only cell phones, television set-top boxes. USB wide....
  • 4. Extraordinary material safety and environmental protection, environmental protection ABS shell with high-density material, non-toxic, safe....
  • 5. Standard Micro USB OTG interface cable, Micro USB interface for all common mobile phone must also support OTG function..
Check Stock

ICOM M424G VHF Black Radio with Built-in GPS - M424G 41

  • Incorporating Icom's common Marine Family User Interface designed for simple, intuitive operation. A rotary selector and directional keypad provide quick and easy access to the intended functions. The high contrast white backlit LCD and laser-cut keypad match well with modern boat designs..
  • The built-in active noise cancelling provides superb performance. It reduces background noise up to 90% in the received signal and 30% in the transmits signal..
  • The IC-M424G has a built-in 10W amplifier that increases the audio output to an external PA speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, the foghorn can also be emitted from the external PA speaker..
  • The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test call....
Check Stock

Dorhea 37 in 1 Sensor Modules Kit with Tutorial for R3 Board Mega2560 Mega328 Nano Compatible with IDE Raspberry Pi

  • 37 in 1 sensor module Kit is complete update and common models,compatible with arduino R3, MEGA 2560, NANO and Raspberry pi..
  • All components compatible with Arduino IDE, can be used directly..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, There are tutorials in the CD that comes with..
  • Complete Update and common models for arduino NANO R3 Mega 2560 starter kit..
Check Stock