Reviews Commissioning Spare - BestBuyersPro.com

BASRTP-B | Contemporary Controls | BAS Portable Router BACnet/IP to MS/TP

Route between BACnet/IP and BACnet MS/TP networks 10/100 Mbps Ethernet Auto-MDIX port Portable version takes USB power Diagnostic LEDs include MS/TP traffic monitor CFR 47, Part 15 Class A Web server for convenient commissioning, re-configuring and troubleshooting Removable connector for the MS/TP port MS/TP baud rates: 9600 to 76800 bps Compliant with RoHS and CE Mark.

★ Displacemen, Velocity, Acceleration Measurement.
★ Measurement Range: Displacement: 0.001-4.000 mm equivalent peak-peak / 0.04-160.0 mil.
★ Velocity : 0.1-400.0 mm/s true RMS / 0.004-16.00 inch/s.
★ Acceleration: 0.1-400.0 m/s² equivalent peak / 0.3-1312 ft/s² / 0.0-40g.
★ Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes..

The Hawkeye 921 provides accurate load trending information with a proportional 4-20mA output signal..
Preset slide-switches provide easy field setup of sensed amperage range with no need for jumpers..
Applications: Load trending. Motor control. Fan/Pump Status. Loop powered analog current sensor simplifies installation. Power the sensor, and receive the signal with only two wires..
Lower cabling and commissioning costs than with traditional 3-wire sensors. Self-gripping split-core for fast retrofit installation..

Compact design allows for installation in confined locations, such as fan coil applications.
Auto-commissioning simplifies installation, since models require no adjustments in the field.
Auto-shutoff actuator motor extends actuator life by reducing drive time and excessive motor wear.
Actuator can be mounted after the valve body is piped, simplifying installation and providing application flexibility.

In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines..
Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes..
Optional headphones for use as electronic stethoscope.
Individual high quality ccelerometer for accurate and repeatable measurements..
We use DHL / Fedex / UPS. Generally, it only needs 3~5 days to arrive Europe from China..

In accordance with ISO 2372, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines..
Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes..
Individual high quality accelerometer for accurate and repeatable measurements..
Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface..
Vibration measure meter with Warranty 1 year, We will use the quickest shipping way to delivery the meter for you ..

Test open and short circuit of intel 1155 BGA CPU socket and Northbridge connection bus signal.
Using the method of LED indication instead of the traditional multimeter manual test method.
Prevent damage to the CPU during repair or commissioning.
Is a must-have tool for repairing and debugging computer motherboards.
It is convenient and intuitive to replace the traditional multimeter.

You can use the universal USB 5V interface power supply, can also use an external DC power supply or 9V battery..
The number of components is small, all straight-line components, installation and commissioning simple..
Addition and subtraction frequency settings for the measurement of radio transceivers and other equipment..
You can select the power saving mode, if the frequency is not obvious changes within 15 seconds automatically turn off the display..
Measurable frequency range 1 Hz -50 MHz. Can measure the oscillation frequency of most commonly used crystal..

This vibration meter complies with ISO 2954 and is used for periodic measurements to detect imbalances and misalignments and other mechanical faults in rotating machines.
The vibrometer is specially designed for easy on-site vibration measurement of all rotating machinery for quality control, commissioning and predictive maintenance purposes.
This digital vibrometer is a single high-quality accelerometer for accurate and repeatable measurements.
Optional headphones for use as electronic stethoscope.

Cost-effective economy oscilloscope, 100MHz Bandwidth, 1GSa/s, 8M memory depth.
with 1CH 25MHz waveform generator, support arbitrary waveform output.
14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and....
32 kinds of auto measurements with statistics.
3-digit digital voltage meter and 6-digit hardware frequency indicator functions.
It is a useful commissioning instrument for various fields such as communication, aerospace, national defense, embedded systems, computers, research....