Reviews Commander V2 0

Think Tank Photo Digital Holster Harness V2.0 (Black)

  • Fits one Digital Holster V2.0 (sold seperately) with a DSLR and attached lens inside.
  • Carries a Digital Holster V2.0, hands-free, in front of torso.
  • Keeps camera easily accessible and protected inside Digital Holster V2.0.
  • Mesh back panel for ventilation and comfort.
Check Stock

Canon 6D Mark II DSLR Camera with Canon EF 24-105mm f/4L is II USM Lens, Auxiliary Panoramic and Telephoto Lenses, 32GB Memory + Accessory Bundle

  • Canon EOS Rebel 6D Mark II DSLR Camera with 26.2MP Full-Frame CMOS Sensor, DIGIC 7 Image Processor, Full HD Video at 60 fps.
  • Digital IS, Native ISO 40000, Expanded to ISO 102400, Built-In GPS, Bluetooth & Wi-Fi with NFC.
  • Canon EF 24-105mm f/4L IS II USM Lens - EF-Mount L-Series Lens/Full-Frame Format, Aperture Range: f/4 to 22, Internal Focus.
  • In the Box: Eyecup Eb - RF-3 Body Cap for Canon EOS Cameras - Wide Neck Strap EW-EOS 6D - LC-E6 Charger for LP-E6 Battery Pack - LP-E6 Rechargeable Lithium-Ion Battery Pack (7.2V, 1800mAh) - AVC-DC400ST Stereo AV Cable - IFC-200U USB Interface Cable - 6.9' (1.9 m).
  • In the Bundle: Ultimaxx Automatic Flash with LED Video Light - Sandisk 32GB SDHC Class 10 Memory Card - Commander USB Memory Card Reader - Commander UV Filter - 2.2x Telephoto Lens - 0.43x Wideangle Lens - Commander Tulip Lens Hood - Commander Camera Remote Control - Flexible Spider Tripod - Camera Backpack - Commander Hand Grip Strap - Commander Cleaning Pen - Commander Dust Blower - 5pc Commander Starter Cleaning Kit.
Check Stock

AC Adapter for Cisco Linksys DPC3008 DPC3008-CC Modem Charger Power Supply 12V 1A AC Adapter for Linksys WRT54G Wireless-G Router

  • Fits: APD 18W WD TV Live (Latest) WDBHG70000NBK, WDBGXT0000NBK ADS-25E-12 12018EPCU WA-18G12U WDPS071RNN 12VDC 1.5A - 2A.
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • 12V 1A - 2A AC Adapter Replacement for Linksys WRT54G Wireless-G Router v1.1, v2.0, v2.2, v3.0, v3.1, v4 Only, Linksys WRT54G-BP Wireless-G Router, Linksys WRT54G-TM Wireless-G Router v1.1, v2.0, v2.2, v3.0, v3.1, v4 Only, Linksys WRT54GL Wireless-G Router, Linksys WRT54GP2 Wireless-G Router..
  • Regulated switching power supply with 2.1 mm x 5 mm plug, center positive.
  • AC Adapter For Cisco Linksys DPC3008 DPC3008-CC Modem Charger Power Supply.
Check Stock

Geekworm for Raspberry Pi 4, X857 V2.0 mSATA SSD Expansion Board + X735 V3.0 Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board (Not Include Raspberry Pi 4)

  • √[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
  • √Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
Check Stock

PowerTek Barikad V2.0 Youth Ice Hockey Goalie Pad Set - 20\ Leg Pads, Glove, Blocker

  • PowerTek Goalie Starter Set includes (1 Pair) goalie leg pads, (1) catch glove, and (1) blocker.
  • V2.0 Barikad LEG PADS are constructed of light material and feature adjustable straps along with adjustable knee locks and knee lifts.
  • V2.0 Barikad CATCH GLOVE features ultra-light construction, a pre-flexed palm, and full backhand protection.
  • V2.0 Barikad BLOCKER is ultra-light as well and features built-in reinforced thumb protection.
  • Blocker and Catcher for "regular" goalie. Catch Glove worn on Left Hand, Blocker worn on Right Hand..
Check Stock

Fenix UC35 V2.0 1000 Lumen Rechargeable Tactical Flashlight with Lumen Tactical Organizer

  • UPGRADE FROM THE UC35 - The UC35 V2.0 is fitted with a CREE XP-L HI V3 LED to reach a maximum output of 1000 lumens and 291 yards of throw - that's 60 lumens brighter and 73 yards more throw than the UC35!.
  • DURABLE STAINLESS STEEL SIDE SWITCH - Control on/off output via a tactical tail cap while a new durable stainless steel side switch lets you adjust through 5 brightness outputs plus Strobe including the new 1 lumen moonlight mode. This mode is very useful for reading up close and nearly doubles the max runtime!.
  • SHORTER BODY FOR EDC CARRY - Almost half an inch shorter in length than the original, the UC35 V2.0 is perfectly suited for everyday carry whether you're a mechanic, police officer or outdoor explorer..
  • BUILT-IN USB CHARGING - An included rechargeable li-ion battery and built-in USB charging port keep the UC35 V2.0 powered wherever you go. A boot up battery indicator lets you know how much power remains and charging indicator lights keep you informed throughout the charging process..
  • PACKAGE CONTENTS - Fenix UC35 V2.0 flashlight, pocket clip, USB charging cable, holster, lanyard, 2 spare o-rings, spare rubber boot, instruction manual, warranty card. Also includes Lumen Tactical battery organizer.
Check Stock

Geekworm X857 V2.0/X862 V2.0 Matching Metal Case X857-C3 + Power Switch + Cooling Fan Compatible with Raspberry Pi 4 Model B & X857 V2.0/X862 V2.0& X735/X708 Not Support X873

  • New version X857-C3 metal case with power control switch and super mute 4010 cooling fan for Raspberry Pi 4 Model B & X857 V2.0/X862 V2.0& X735(ASIN:....
  • X857-C3 case DO Not support X857 V1.2 / X862 V1.0 / X872 V1.1 and X873 V1.2(Produced after May 2021).
  • 【User Manual】Refer to Geekworm WiKi search....
  • Supports X735 installation for intelligent power management and cooling your Raspberry Pi.
  • Supports X708 UPS and battery holder installation for UPS....
  • Case Size(Installation): 11.4cm x9.5cm x 5.5cm / 4.48inch x 3.74inch x 2.16inch.
  • Note: there is no switch port on X857 V2.0/X862 V2.0, the momentary power switch in the X875-C3 can only work with X735/X708..
Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

  • ...5.8G WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
  • √ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
  • √ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copyi....
Check Stock

DJI Phantom 4 Pro Plus V2.0 - Drone Quadcopter UAV with 20MP Camera 1" CMOS Sensor 4K H.265 Video 3-Axis Gimbal, Remote Controller with 5.5" Screen, White (CP.PT.00000234.01)

  • The Phantom 4 Pro+ V2.0 camera drone comes equipped with a 3-axis motorized gimbal and a 1-inch 20MP CMOS sensor with a mechanical shutter that eliminates rolling shutter distortion..
  • With the 5.5-inch 1080p LCD screen built into the optional remote controller, your images are easily visible even in direct sunlight..
  • The Phantom 4 Pro V2.0 is a beast when it comes to flight performance. It has a maximum flight speed of 72 kph and an 8km transmission range with 1080p livestreaming and automatic frequency switching thanks to OcuSync 2.0..
  • The Phantom 4 Pro V2.0 offers Intelligent Flight Modes such as TapFly, ActiveTrack, Draw mode, Gesture mode, and more. Draw lets you control the flight path with a fixed altitude simply by creating a route on the screen..
  • What you get: DJI Phantom 4 Pro+ V2.0, Remote Controller with 5.5" Screen, Intelligent Flight, Battery, Charger, Power Cable, 4x Propellers (pair), Gimbal Clamp, microSD Card (32GB), Micro USB Cable, Carrying Case.
Check Stock

Lizard Skins 0.5mm Lacrosse Grip Tape USA Independence V2 Slip Resistant - 39 Inches - 99cm - Fits Any Lacrosse Stick – LAX Stick Grip Tape

  • Version 2 of our signature Lacrosse Grip is finally available, introducing the Lizard Skins 0.5mm Lacrosse Grip Tape V2. Our Lacrosse grip tape is designed to improve the feel and improvement of any lacrosse stick..
  • Represent the Stars and Stripes with our USA Independence Grip! The Lizard Skins 0.5mm Lacrosse Grip V2 is designed to also reduce the wear in the palm of your gloves..
  • We designed our V2 Lacrosse stick grip tape with feedback from hundreds of professional lacrosse players and the lacrosse community. Our version lacrosse grip was already one of the most used grips in Lacrosse but we saw the improvement and changes that needed to be done and we implemented them and the Lacrosse athletes we showed love our are V2 Lacrosse Grip Tape..
  • Our new texture combined with our DSP durasoft polymer grip creates the perfect balance of tackiness and mobility and it was designed based on a lacrosse player’s style of hand movement..
  • The Lizard Skins V2 Lacrosse Grip Tape is 0.5 millimeters thick and is 39 inches or 99cm long with precut ends and finishing tape. Our lacrosse grip tape is slip resistant and has a full adhesive back so putting the grip on is easy and the grip stays on through all conditions..
Check Stock