Reviews Coil Roofing Nail

Carpenter Air Tools CCN45 7/8\ To 1 3/4\ 15° Pneumatic Coil Roofing Nailer

  • The CCN45 drives 15° wire Collated roofing nails from 7/8 to 1-3/4 in length..
  • Contact firing mode for convenience and speed enabling smooth uninterrupted operation..
  • Ergonomic molded rubber grip ensures the tool fits comfortably in your hand reducing fatigue..
  • Durable and lightweight heat-treated aluminum housing for years of solid performance..
  • Holds a full coil of 120 roofing nails limiting the need for constant reloading and the tool free depth adjustment will help to make sure every nail is set perfectly..
Check Stock

Pneu-Tools CN45H 1-3/4in. Classic Coil Roofing Nailer

  • This classic roofing nailer is everything you expect, with a few extra surprises.
  • While other companies are cutting corners to make a fast dollar, we've gone the extra mile to make sure this tool will last for generations.
  • Of course, if a tool is going to last a long time, then it should have some great features too, right? That is why this tool is upgraded.
  • Premium one-step, quick-open magazine to reduce reload times. Smooth-as-butter drive depth adjustment for precision control.
  • This shoots a 15° wire collated coil roofing nail. Fast single mode trigger and optimized recoil balance.
Check Stock

3PLUS HCN45SP 11 Gauge 15 Degree 3/4\ to 1-3/4\ Coil Roofing Nailer

  • Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails.
  • Adjustable shingle guide for quick shingle spacing.
  • Integrated side skid pads prevent the tool from sliding off roof when placed on its side.
  • High-capacity magazine holds up to 120 coil nails at a time.
  • Tool free adjustable depth of drive for consistent and controllable nail fit.
  • Interchangeable trigger for single shot or bumper fire function..
Check Stock

Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Eagleggo Parts EP 876-174 Aftermarket Piston O-Ring for Hitachi NV45AB2, N5008AC, NT65A2, NT50A Nailers, Hitachi Replaces Part 876-174, 876174 Piston O-Rings - 10pcs/Pack

  • COMPATIBLE WITH: Fits Hitachi 876-174, 876174 Piston O-Rings..
  • This 876-174 o-ring is compatible with Hitachi N5010A, N5008AC / AC2 / ACP, NV45AB2, NT65A2, NT50A Nailers.
  • COMPATIBLE WITH: Fits Hitachi NT65A3 16-Gauge Finish Nailer NV45AB2 Side Load Coil Roofing Nailer NV45AB2(S) Bottom Load Coil Roofing Nailer NV45AE 1-3/4" Side Load Coil Roofing Nailer NV50A1 Light-Duty Coil Utility Nailer NV50AA Light-Duty Coil Utility Nailer N5008ACP 7/16" 1" - 2" x 16 Gauge Standard Crown Stapler N5010A 1/2" Standard Crown Stapler N5021A 15/16" Wide Crown Stapler N5024A 1" Wide Crown Stapler.
  • COMPATIBLE WITH: Fits Hitachi NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus N3824A .5"-1.5" Wide Crown Stapler 16Ga N5008A1 Stapler N5008AC 2" 16Ga 1"-2"Standard Crown Construction Stapler NH451 "T" Nailer NT50A 18Ga Brad Nailer NT65A 16 Gage Brad Nailer NT65A2 2-1/2" 16Ga Finish Nailer NV45AA Heavy Duty Coil Nailer NV45AB 1-3/4" Heavy Duty, Roofing Coil Nailer VH501 Nailer N5008AC2 Stapler N5024A2 Stapler.
Check Stock

AeroPro CN45N Professional Roofing Nailer 3/4-Inch to 1-3/4-Inch

  • Professional grade roofing nail gun designed with moving cylinder engine for low recoil.
  • Selective actuation switch (sequential or bump).
  • Heat treated aluminum hosing designed for extra heavy duty application.
  • Tool-free precise adjustable drive depth.
  • Single-action side loading magazine with capacity up to 120 coil nails.
Check Stock

Freeman P4FNCB Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners, Black with Orange

  • 877-323 Piston Driver: Aluminum is crimped into the unilok grooves of the shaft to prevent unscrewing. Hardened steel lock tite and micro-mechanically locked piston driver interface. never to unscrew.Hitachi cylinder ring.
  • Suitable for NR83A NR83A2 NR83A3 NR83A3S.partes para pistola hitachi roofing framing placa de cilindro nr832 nr65ak2 nv45ab2.hitachi nail gun parts original.
  • Compatible with: Hitachi: NV65AC Coil Pallet Nailer, NV50A1 Light-Duty Coil Utility Nailer, NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus, NV65AA Nailer.
Check Stock

Grip-Rite 1-1/4-Inch 15? Electro-GALVANIZED Coil Roofing Nails Smooth Shank 600 nails per tub

  • For best results use Grip-Rite GRTCR175 15 degree coil roof nailer.
  • 1-1/4" x .120" x 3/8" Diameter Thin Flat Head, Coil Roofing Nails.
  • Clear, Resealable, Reusable, Stackable Plastic Tub. GREAT for Do-It-Yourself Projects.
  • Use with Grip-Rite GRTCR175 Coil Roofing Nailer.
Check Stock