Reviews Coax To Hdmi Balun

MFJ Enterprises Original MFJ-915 RF Isolator 1.8-30 MHz 1500W PEP SO-239

  • The RF Isolator is effective from 1.8 to 30 MHz.
  • RF Isolator is a 1:1 Current Balun designed to be placed in line with a 50-Ohm coax..
Check Stock

MFJ-969 MFJ969 Original MFJ Antenna Tuner + SWR Meter (Manual - 1.8-50Mhz [160-6 Meters], 30/300W)

  • The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off switch, antenna switch and a 4:1 balun! (The light uses 12 VDC or 110 VAC with MFJ-1312D * Not included).
  • MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets you select 2 coax lines, random wire/balanced line or dummy load (direct or through)..
  • An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station..
Check Stock

AllAboutAdapters RF Coax to HDMI VGA Component YPbPr Video Demodulator TV Tuner for NTSC System

  • 2-In-1 RF coax TV tuner solution for decoding RF coax CATV signals into 1080p HDMI output or HD Component YPbPr video audio output. Professional grade agile RF coax demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920x1080 pixels. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
  • Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Backward compatible with all DVI equipments via using HDMI to DVI adapter..
  • Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details..
  • Multiple of these RF demodulator/tuner units can work....
Check Stock

ViewHD Prosumer HDMI 3x1 Switch | 4K@30Hz HDMI v1.4 | MIC Audio Injection / Combiner | HDMI Audio Extractor | Optical / Coax / RCA L/R to HDMI Audio| ARC | Model: VHD-PH3X1GS

  • HDMI v1.4 3x1 auto or manual switch with exclusive audio injection and extraction features.
  • Support HDMI audio injection from Toslink / Coax / RCA LR / MIC to replace the original HDMI input audio sound track..
  • Support HDMI audio mixer / combiner function to add MIC audio input to the HDMI STEREO input signal with MIC volume control.
  • the MIC mixer will not mix with the HDMI audio if the HDMI audio format is higher than stereo.
  • Support SPDIF Toslink / Coax / RCA LR / MIC (3.5mm jack) audio input signal to HDMI audio output signal conversion..
  • Support HDMI input audio signal to Toslink & Coax (up to DD+ & DD5.1CH) audio conversion.
  • Support HDMI stereo audio to RCA L/R & 3.5mm analog stereo conversion.
Check Stock

BNC to HDMI Converter Adapter Female CVBS BNC HDMI Coax Connector Coaxial Composite Analog Video Audio Input 1080P Output HDCP Hook Security Camera DVRs Surveillance CVR AC1420 CCTV for Monitor HD TV

  • BNC to HDMI Converter - This BNC HDMI connector is an adpater to Hook up old devices with new modern PC monitor or LCD through conversion of BNC Coax analog video & 3.5mm aux audio Composites signal input to HDMI output for CVBS security cameras VCR , surveillance DVRs , multiplexers CVR AC1420 or CCTV system to HDTV , projector , HD monitor , high-definition large / flat screen LED digital LCD TVs etc..
  • BNC to HDMI - Equipped 3.5mm audio port to input audible signals that you can inject sounds to the CVBS cameras video signals. It's a simplistic way to broadcast live video feed and perfect for real-time video monitor using CVBS protocol.(Note: It's ONLY works with CVBS signal camera, NOT for AHD / TVI / CVI / SDI camera or antenna / cable TV.
  • The output port is standard HDMI type A and the input is coax BNC , NOT coax RF, If you need RF, please check the hdmi to RF converter in our store.).
  • CCTV to HDMI Converter - Wire it by the steps of CVBS CCTV camera or DVR with BNC Coax output - coaxial cable - this adapter - HDMI cable - Projector/ Computer / pc / monitor ( if you use a TV set as the monitor, switch the“input or source” button on the TV clicker to the HMID mode.).
  • BNC to HDMI Adapter for TV - Adapts 3D compensation technology: motion optimi....
Check Stock

RadioShack HDMI to RF Coaxial Converter Adapter

  • HDMI to Coaxial video output (TV channel 3 / 4).
  • Does not work in the reverse direction (connecting an old coax video source to an HDMI input television)..
  • The source device such as Blu-ray, set-top box, and gaming console that is connected to the HDMI input on this product. Must be able to output a 480i/480P signal..
  • This device has been tested to be compatible with many HDMI devices including Apple TV (4th Generation), Sony PlayStation 4, Sony PlayStation 3, Microsoft Xbox One, Microsoft Xbox 360, Nintendo Switch, and several others..
  • Input interface: 19-Pin HDMI Type-A Female | Output: 75 Ohm coax connector.
Check Stock

4-Input Composite Video Audio to RF Coax TV Modulator

  • Professional-grade audio/video to RF modulator for broadband A/V distribution for all NTSC TV system setup. Converts up to 4 composite RCA video/audio....
  • Supports 4 composite RCA video inputs and 4 RCA audio inputs. Easy front panel push button control for easy channel selection. Each video/audio input....
  • Transmitting audio/video over coax cable offers greater transmission range and much lower cost than the typical balun or Cat5 extender solution.....
  • Powerful 100db signal output sufficient for long cable runs up to 1200 meters. Multiple of these 4-input RF modulator units can be cascaded together....
Check Stock

Shakespeare 5420-XT Galaxy Little Giant AM/FM Antenna , White , 4 foot

  • Very high quality FM Loop antenna. Designed for installation at your home (outdoors or attic), office or on an RV.
  • Heavy duty construction features very high quality tubing, stand-offs, integrated balun and attaching hardware.
  • Unlike competitors - this model is a larger 21.5" diameter.
  • Provides great improvements in FM reception of analog and digital signals versus indoor dipole or whip antennas.
  • No additional parts needed - attach your 75 ohm coax (instructions enclosed, including recommended grounding and safety details).
Check Stock

FM Loop Antenna Outdoor, Attic-mount and RV FM Antenna

  • Very high quality FM Loop antenna. Designed for installation at your home (outdoors or attic), office or on an RV.
  • Heavy duty construction features very high quality tubing, stand-offs, integrated balun and attaching hardware.
  • Unlike competitors – this model is a larger 21.5″ diameter.
  • Provides great improvements in FM reception of analog and digital signals versus indoor dipole or whip antennas.
  • No additional parts needed – attach your 75 ohm coax (instructions enclosed, including recommended grounding and safety details).
Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock