Reviews Coal cutting Bits

Generic_MG 1 Pckt of BITUMINOUS Blacksmith Coal 50lbs

  • Listing is for two, 25lb. boxes of Bituminous Coal for a total of 50lbs of Coal. Crushed and processed, ready to use. Very hot burning! Crushed into 1" to 3" chunks..
  • Also works great in coal stoves! Unlimited quantities are available. Also, I sell my coal in boxes instead of bags like some other people are doing, because you can stack a couple thousand pounds of boxed coal into a small corner of a garage very quickly without making a mess and it stays put and does not fall over. The boxes also keep the coal nice and dry. I ship all my boxes of coal with plastic liners in the box to protect the coal from water damage..
Check Stock

BTSHUB Router Bit Set 1/4 inch Shank 100pcs Tungsten Carbide Tips for DIY Woodworking Cutter Kit

  • 100 piece tungsten carbide router bit kit with 1/4inches shank - 2-blade bits on most bits.
  • Bits for use on metal, wood, plastic and masonry - Controlled depth of cut minimizes kickback, Perfect for edging, trimming, veining and grooving in....
  • Precision ground cutting edges stay sharper - Heat treated shanks and bodies for durability.
  • Comes with the standard bits used in most household projects.
  • Aluminum carry case is included for convenient transport and keeping the bits in places..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Drill Hog USA 1/8" Cobalt M42 Drill Bits 12 Pack

  • Cobalt high speed steel ensures the bits super hard, sharp and cutting effectively with impressive performance in cutting metal, plastic, and wood etc with long tool life.
  • All drill dimensional & tolerances conform to ASME/ANSI B94.11M or USCTI - United States Cutting Tool Institute drill standards.
  • Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging.
  • Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly.
  • Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc.
Check Stock

Minka-Aire F753-CL Java 54 Inch Outdoor 3 Blade Ceiling Fan in Coal Finish

  • DESIGN: Versatile and Contemporary in design, the Minka-Aire Java is designed in a Coal finish and Three Coal Blades.
  • INCLUDED: One RCS213 - Three-speed hand-held remote and One 6-Inch Downrod.
  • MOTOR: Conveniently quiet, 3 speed - reversible motor. Run Summer and Winter to aid in rotating air and cutting down on energy costs..
  • DIMENSIONS: Measures 14.75'' from the ceiling to the lowest point of the fan with the included 6" downrod. This Contemporary Ceiling Fan has a blade....
Check Stock

WEN 230282A 282-Piece Rotary Tool Accessory Kit with Carrying Case

  • Features 282 accessories for sanding, carving, deburring, cutting, drilling, grinding, polishing, engraving, as well as many other verbs.
  • Wire-bristled brushes work great for rust removal, paint stripping, pumpkin carving, and more.
  • Grinding discs and bits perfect for sharpening knives or trimming dog toe nails.
  • Includes diamond-coated metal bits, HSS cutters, sanding discs, cutting discs, spindle sanding bands, buffing wheels, drill bits, polishing paste and more.
  • Compatible with the WEN rotary tools, as well as any other rotary tool that accepts bits with 1/8-inch shanks.
Check Stock

Luo ke 43 Pcs Stone Carving Sets Diamond Burr Kits with 1/8 Inch Shank for Carving/Engraving Stone, Rocks, Jewelry, Glass, Ceramics Fits for Dremel Rotary Tools

  • ▶【PACKAGE CONTENT】 43 pieces diamond burr set contents : 26 diamond burr bits, 4 diamond cutting wheels, 10 impellers and 3 metal Mandrel. come with plastic storage box.
  • ▶【FEATURE】This sets are includes diamond cutting diss, diamond carving / grinding bits, flas polishing wheel, diamond drill bits, suitable for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more.
  • ▶【APPLICATION】Made of premium diamond particles and alloy, durable and sharp cutting, Perfect for stones, glass, porcelain, tiles, carbide, rocks, ceramics, aluminium and copper.
  • ▶【EASY TO USE】All bits have 1/8 inch diameter shank, fits for electric rotary tool or Pneumatic power tools , die grinder, mini dirll , etc.
  • ▶【WARM PROMPT】Using diamond bits with water (cooling fluid) can effectively prevent dust and increase the service life of tools.
Check Stock

HOZLY 1/8 Inch Shank Carbide End Mills(3.175x17mm) Up & Down Cut CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Composite Multilayer Pack of 5

  • Up Down Cut,1/8″ Shank X 1/8″Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm, 5 pieces per pack.
  • The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life.
  • Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process.
  • Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic.
  • Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
Check Stock