Reviews Coal Cutting Bit

IRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)

  • IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
  • This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
  • A full screw tip allows the drill bit to self-feed for ease of drilling.
  • The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
  • Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
  • A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
  • Fits all standard 1/4-inch quick change chucks.
  • Full screw tip allows the bit to self feed.
Check Stock

Thorness Traditional cast Iron Bowed Log/Coal Tongs

  • Our cast bowed iron log / coal tongs will make keeping your fire side tidy just that little bit easier.
  • They feature a pincer type action and have a durable cast iron construction finished in a heat resistant matt black.
  • Perfect for use with stoves, wood burners and open fires.
Check Stock

Hunter Fan Company 53118 Hunter 48\ Sea Wind Indoor/Outdoor Low Profile Ceiling Fan, Matte Black Finish

  • DESIGN: Sleek and Simple in design, the Simple 52" is designed in a Coal finish and Three Coal Blades.
  • BULB: No bulb included. Custom 20W LED Light Kit K9787L sold separately.
  • INCLUDED: RC400 - Six-speed hand-held remote with On/Off plus full-range light dimming, Forward and Reverse function, and 6" Downrod.
  • MOTOR: Conveniently quiet, 6 speed - reversible DC motor. Run Summer and Winter to aid in rotating air and cutting down on energy costs..
  • DIMENSIONS: Measures 12.75'' from the ceiling to the lowest point of the fan with the included 6" downrod. This Sleek Ceiling Fan has a blade sweep diameter of 52'' with 14° Blade Pitch.
  • ADDITIONAL: Requires Bond hub BD-1000 (sold separately) to work with Amazon Alexa or Google Home. Optional WC400 remote control can be purchased separately..
Check Stock

Generic_MG 1 Pckt of BITUMINOUS Blacksmith Coal 50lbs

  • Listing is for two, 25lb. boxes of Bituminous Coal for a total of 50lbs of Coal. Crushed and processed, ready to use. Very hot burning! Crushed into 1" to 3" chunks..
  • Also works great in coal stoves! Unlimited quantities are available. Also, I sell my coal in boxes instead of bags like some other people are doing, because you can stack a couple thousand pounds of boxed coal into a small corner of a garage very quickly without making a mess and it stays put and does not fall over. The boxes also keep the coal nice and dry. I ship all my boxes of coal with plastic liners in the box to protect the coal from water damage..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

Minka-Aire F671L-CL Pure 48 Inch Flush Mount Ceiling Fan with Integrated 16W LED Light in Coal Finish

  • DESIGN: Sleek, contemporary designed flush mount and close-to-ceiling, the Minka-Aire Pure is designed in a Coal finish and Three Coal Blades.
  • BULB: The Pure ceiling fan includes an integrated 16 Watt Dimmable LED Light Module in Etched White Lens.
  • INCLUDED: One WC116L - Four-speed wall control with full-range light dimming.
  • MOTOR: Conveniently quiet, 4 speed - motor. Run Summer and Winter to aid in rotating air and cutting down on energy costs..
  • DIMENSIONS: Measures 8.75'' from the ceiling to the lowest point of the fan. This Contemporary Ceiling Fan has a blade sweep diameter of 48'' with 12° Blade Pitch.
  • ADDITIONAL: Requires Bond hub BD-1000 (sold separately) to work with Amazon Alexa or Google Home..
Check Stock

MINKA-AIRE F786-CL Simple 44 Inch Outdoor 3 Blade Ceiling Fan with DC Motor in Coal Finish

  • DESIGN: Sleek and Simple in design, the Simple 44" is designed in a Coal finish and Three Coal Blades.
  • BULB: No bulb included. Custom 20W LED Light Kit K9787L sold separately.
  • INCLUDED: One RC400 - Six-speed hand-held remote with On/Off plus full-range light dimming, Forward and Reverse function, and One 6" Downrod.
  • MOTOR: Conveniently quiet, 6 speed - reversible DC motor. Run Summer and Winter to aid in rotating air and cutting down on energy costs..
  • DIMENSIONS: Measures 12.75'' from the ceiling to the lowest point of the fan with the included 6" downrod. This Sleek Ceiling Fan has a blade sweep diameter of 44'' with 14° Blade Pitch.
  • ADDITIONAL: Wet Rated for indoor or outdoor use. Requires Bond hub BD-1000 (sold separately) to work with Amazon Alexa or Google Home. Optional WC400 remote control can be purchased separately..
Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • [4 WINGS WOOD CNC ROUTER BIT 1/2 SHANK] Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • [HIGH-QUALITY CNC ROUTER BIT] The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • [WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well a....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/4 inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 3 Wings can cut your project material quickly and cleanly.1/4 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/4" Cutting height, 1/4" Cutting depth,1"(25.4mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock