Reviews Co2 Gas Shielded Wire

WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 11-Lb Spool 0.035\ (0.9mm) 8\-roll | Pack of 2 Rolls

  • Two rolls premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • wrapped in moisture-resistant plastic film..
  • Typical element content (wt%) in product: C=0.08.
  • Two 11-lb rolls at this price. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

KUJOBUY DIY CO2 Generator Aquarium CO2 System kit pro Tube Valve Guage Bottle Cap D201 Cap for Aquarium Moss Plant Aquarium Planted Tank

  • The CO2 DIY kit is with ABS engineering plastic cover, with locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it's with professional metal material gas adjusting valve to ensure pure CO2 DIY.
  • According to the pressure principle,to push the acid liquid into the small soda liquid,the two liquids reacting to produce continuous PURE carbon dioxide.
  • This CO2 Generator System Kit is with Pressure gauge for pressure display,gas adjustable function,and simple pressure relief, easy to operate, safe and practical advantages! Once start, sustainable gas supply!.
  • Easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better growing..
Check Stock

Jetsream-Cycling 20 x 16g Bike Threaded CO2 Cartridges | 16 Gram C02 Cartridge Threaded for All co2 Bike Tire Inflators | Refill co2 Cylinder Fits Bike CO2 Pump |CO2 Cartridges 16g Threaded

  • HIGH QUALITY 3/8-24 SIZE THREADED- high quality threaded co2 cartridges fits most high quality inflator heads.it can let co2 cartridges easy screwed right to the end of the CO2 inflator head where the pin punches a hole,also it can fit virtually all threaded CO2 bike tire inflators..
  • NO OIL INSIDE-Our co2 cartridges were washed by water,There is no oil inside co2 cartridges,So that there is no oil inside bike tire,It will protect your bike tire..
  • GAS VOLUME GUARANTEE-Every Cartridges is weighted before send for you,So that not have empty cartridges and less gas volume cartridges.
  • HIGH PURITY GAS-Our co2 cartridges use high quality co2 gas,the purity can reach 99.9%,so that the gas will be very easy flow out and inflate your tire.
  • WARNING: Never put the cartridges in or near any hot place,such as inside car or direct in sunshine,near heater and oven. Please make sure the co2 gas release totally that means the cartridges is totally empty ,then screw out the co2 cartridge out from the valve.
Check Stock

YESWELDER 8ft 100A for Chicago Electric Welder Complete Replacement Mig Welding Gun Parts Torch Stinger

  • This gun is 8 ft long (Longer than the OEM Gun),and has 2 trigger wires, gas hose, wire liner, and power cable all running up the inside of the....
  • Usually fits welders of around 100A gas shielded welders. (Welding wire diameter: 0.6-0.8mm.).
  • Come with .030" tip in the gun ,and one more .030 and .035 tips in the package.
Check Stock

LINCOLN ELECTRIC CO ED030584 .035\NR-211 Fluxco Wire,Black

  • Low spatter, High feedability, Porosity free, Good bead appearance, Easy to weld.
  • Shielding gas is required: 80-percent Ar+20-percent CO2 or 100-percent CO2,All Positions, Single and multi pass welding.
  • Mig solid welding wire for Carbon and Carbon-Manganese steels.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labor conditions.
  • Approvals: ABS, TUV, DB, DNV, LRS, RINA, GL.
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock

30 x 16g Threaded CO2 Cartridges Refills for Bike Bicycle Pump CO2 Inflator Heads - Great Refill for Mountain Or Road Bikes Tires

  • TIME SAVING & EFFORTLESS: CO2 inflators are the devices designed to inject CO2 gas (via CO2 cartridges) into your bicycle tires. Those 16g threaded CO2 cartridges are high pressure. It only takes a few seconds to release the whole bottle of gas. Also great for inflating a tubeless tire..
  • PORTABLE: CO2 cartridges are so light and compact, easy to carry around in your saddle bag, backpack, attached on bottle cage holes & under saddles (with special adaptors)..
  • PRECISELY THREADED: Well threaded cartridges would match the high quality inflator heads perfectly. It ensures that the cartridge could be screwed right to the end of the CO2 inflator head where the pin punches a hole..
  • STRICT QC: Every Cartridge is weighted before packing in the factory!.
  • WARNING: Never store the cartridges in or near any hot place, such as in the car under direct sunlight, near heater and oven. Never use low quality CO2 head. Make sure the head punches the bottle fully, check if the gas being released within seconds. If not, or the gas being released very slowly or the gas freezing the head, please keep discharging the gas for a few mins until the bottle is fully empty..
Check Stock

CO2 Inflator Kit with 4 x16g CO2 Cartridges - Presta & Schrader Valve Compatible - CO2 Bike Pump for Road and Mountain Bikes

  • 【Get Back Riding Fast】: The CO2 Inflator Set (CO2 Cartridges x 4/ CO2 Inflator/ insulate sleeve) is a new standard of threaded CO2 Cartridge, perfect for whether your going on tough mountain range rides, or in need of fast air pressure during hot pursuit racing! With the 16g threaded cartridges, it can fill a large (26” x 1.95”) MTB tire to 40psi (2.7bar) in a single shot, now that’s impressive! Get yourself back on the trail quick and conveniently with the handy 16 gram threaded CO2 cartridge.
  • 【Super Compact and Lightweight】: CO2 Inflator fit Presta & Schrader valve, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort. But please note that you'll more than likely find that your tire will be flat within 24 hours because CO2 will leak out of your tire faster than air. So don't forget to pump it up before your next ride.
  • 【Compatible for all Threaded CO2 Cartridges】: Inflator head designed for any size of threaded CO2 cartridges. Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to use the insulate sleeve(include) to ....
Check Stock

MULMART 15FT M-150 M-15 M15 M150 MIG Welding Gun Welding Torch Stinger Replacement for Miller 150A,Millermatic 90, 35/120 / 130 / 130XP /135 / 140s / 150/175 / 180s /185,Hobart IronMan 210

  • ... used for Miller SideKick XL / Cricket XL / Millermatic90, Millermatic 35 / 120 / 130 / 130XP / 135 / 140s / 150 / 175 / 180s / 185 / DVIs /211, Challenger, Challenger 172, Pulser or Hobart IronMan 210.
  • Welding Wire Diameter:0.8mm~0.9mm(0.030"~0.035"Diameter Welding Wire).
  • Duty Cycle: 100% with CO2 Gas, 60% with Mixed Gas.
  • 【Feature】One-piece modular trigger assembly-Molded out of high heat resistant material to withstand head and spatter and ensure long life. Gun tube design-Armored with an electrically insulated metal jacket optimizing fine wire welding performance. Abrasion-resistant,extruded rubber jacket-Adds strength and long life to the cable. Classic curved handle-Lightweight and balanced, providing a comfortable grip to reduce fatigue.
  • 【Wide Applications】Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications.
Check Stock

The Little Green Change DIY CO2 Aquarium Plant System Kit - Generator Aquarium Moss Plant D201 Tube Valve Guage Bottle Cap with Needle Valve Pressure Gauge for Aquarium Water Plant Tank

  • ▪CO2 Generator:▪ AS an indispensable role in the photosynthesis of aquatic plants, this CO2 generator main for provides a genuine environment for....
  • ▪Application▪ Easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better....
  • ▪Advantage▪ This CO2 Generator System Kit is with Pressure gauge for pressure display, gas adjustable function, and simple pressure relief, easy....
  • ▪Material▪ The CO2 DIY kit is with ABS engineering plastic cover, with a locking pipe device to ensure non-deformation, non-loose, non-slip wire....
  • ▪Note:▪ Make sure carefully observe the direction of the parts before assembly.
  • The usual wrong handle way will cause abnormal reaction components....
Check Stock