Reviews Co2 Gas Shielded Welder

JINSLU MIG Welding Gun 100A 8-ft Replacement Compatible with Chicago Electric Welder Parts/Clarke Torch Stinger Welder 130EN 160EN 180EN / Craftsman 20569 20504 / Harbor Freight Welder And More.

  • 【Perfect Replacement】: The MIG Welding Gun is perfectly compatible with Chicago Electric Welder Parts, Clarke Torch Stinger Welder 130EN 160EN....
  • 【What Is Inside】: 2 trigger wires, gas hose, wire liner, and power cable all running up in the hollow plastic hose, There is a gas valve in the....
  • 【Parameter】: 100A gas shielded welders. Wires diameter :0.6-1.0mm（0.023‘’-0.04‘’）. You can connect this mig gun with a wire feed motor....
  • 【Of Course You Can Try】: We are very confident in our MIG gun and we believe this MIG torch can bring you a good experience when welding. Just....
  • 【About Brand JINSLU】: JINSLU has many years experience in the sale of professional welding products. JINSLU only provide customers with high....
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

  • ...ble wire speed, high no-load voltage, with good compensation of arc force, easy arc starting, less spatter, stable current, and no electromagnetic noise. This machine has both voltage adjustment and current adjustment, which can provide better welding performance to the workpiece..
  • 【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
  • 【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
  • 【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contact tip of this welding torch is 0.8mm. If you use 1.0mm welding wire, you ....
Check Stock

Flux Core Welding Wire ARCCAPTAIN E71T-GS .030 2-Pound Spool Gasless Carbon Steel Mig Welding Wire

  • Welding Easy and Quick: AWS E71T-GS 030” Flux Core welding wire (The actual Net Weight of Wire is 2LB), no need for shielding gas, install it then you can welding all positions, single and multi pass welding. Great for T-joints, butt welds & lap welds..
  • Great Welding Performance: Smooth arc action and High feedability, you will love the less splatter when do your welding project. The flux filling acts as a shielding agent to create beautiful and clean welds. Perfect for Professional welder, metalworking hobbyist, or DIY enthusiast..
  • Self shielded gasless mig welding wire works well on rusty, dirty and painted Material, also strong resistant to base material oil pollution, perfect for use outdoors, high-altitude, and other different environments..
  • Professional Packing: Flux core welding wire is vacuum packed for waterproof, moistureproof, dustproof, then ensure optimum welding performance and effect..
  • Trusted Quality and Service: The mig welder wire was passed TÜV TEST, which made of the finest quality materials and using state of the art technology from a twenty year factory offering in the welding MIG accessories that conform to the high standards..
Check Stock

Jetsream-Cycling 20 x 16g Bike Threaded CO2 Cartridges | 16 Gram C02 Cartridge Threaded for All co2 Bike Tire Inflators | Refill co2 Cylinder Fits Bike CO2 Pump |CO2 Cartridges 16g Threaded

  • HIGH QUALITY 3/8-24 SIZE THREADED- high quality threaded co2 cartridges fits most high quality inflator heads.it can let co2 cartridges easy screwed right to the end of the CO2 inflator head where the pin punches a hole,also it can fit virtually all threaded CO2 bike tire inflators..
  • NO OIL INSIDE-Our co2 cartridges were washed by water,There is no oil inside co2 cartridges,So that there is no oil inside bike tire,It will protect your bike tire..
  • GAS VOLUME GUARANTEE-Every Cartridges is weighted before send for you,So that not have empty cartridges and less gas volume cartridges.
  • HIGH PURITY GAS-Our co2 cartridges use high quality co2 gas,the purity can reach 99.9%,so that the gas will be very easy flow out and inflate your tire.
  • WARNING: Never put the cartridges in or near any hot place,such as inside car or direct in sunshine,near heater and oven. Please make sure the co2 gas release totally that means the cartridges is totally empty ,then screw out the co2 cartridge out from the valve.
Check Stock

AHP Alpha-TIG 225Xi 200 Amp IGBT AC/DC Pulse TIG/Stick Welder 110v/220v Dual Voltage

  • Synergic Function: this mig welder designed basic at One-Knob Intelligent control system. Mig machine can automatic compensation and adjustment of....
  • 110/220V Dual Voltage: This mig welder is dual voltage 110/220V, Machine will auto indicate the input AC voltage, Max output current is 165A, Duty....
  • Lift Tig, 2T/4T Gas/Gasless Function: Machine with Lift TIG function, It is IGBT inverter Gas/Gasless mig welder, Use 0.030’’(0.8mm) Solid and....
  • Arc force, Hot Arc, VRD: This mig machine will auto control voltage and current to achieve smooth arc, This mig welder quite easy using for the Newer....
  • Mig Welder, What’s come with machine: 1 x Mig machine, 1 x 3meters Mig torch, 1 x Ground clamp with 3meters cable, 1 x Stick holder with 3meters....
Check Stock

TOOLIOM E71T-GS .030\ Diameter 2-Pound Spool Flux Core Self-shielded Carbon Steel Mig Welding Wire for TL-135M TL-250M Pro

  • AWS E71T-GS Self Shielding Gasless flux cored welding wire .030” Diameter, 2 Pound Spool.
  • Self-shielded: No need for external gas or flux.All positions, Single and multi pass welding..
  • Good penetration, Less splash, Beautiful weld bead appearance , Easy slag removal.
  • Great for Welding Outdoors or in Drafty Conditions.
  • To be used on TOOLIOM TL-135M,TL-250M Pro MIG Welder (Flux Core MIG Welding).
Check Stock

TOOLIOM E71T-GS .035 Diameter 10-Pound Spool Flux Core Self-shielded Carbon Steel Mig Welding Wire for TL-200M TL-250M Pro

  • AWS E71T-GS Self Shielding Gasless flux cored welding wire .035” Diameter, 10 Pound Spool.
  • Self-shielded: No need for external gas or flux.All positions, Single and multi pass welding..
  • Good penetration, Less splash, Beautiful weld bead appearance , Easy slag removal.
  • Great for Welding Outdoors or in Drafty Conditions.
  • To be used on TOOLIOM TL-200M,TL-250M Pro MIG Welder(Flux Core MIG Welding).
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock