Reviews Co rotating Modular Extruder

YJYGR Mega2560 R3+RAMPS 1.4+A4988 Optical Endstop 3D Printer Mainboard Module Board

  • Smooth transmission, bumpers, damping capacity, low noise level..
  • RAMPS 1.4:It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low....
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement,....
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every....
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

3D Printer Controller DIY Kit, RAMPS 1.4 + 2560 R3 Board + 5pcs A4988 Stepper Motor Driver & Heatsink for Arduino RepRap

  • Suitable for Reprap, memory card add on available..
  • Indicator light indicates when the heater output is turned on, safer and extensible to control other accessories..
  • The for Pololu board is in the pin socket and can be easily replaced or removed for future design use..
  • The modular design includes plug in stepper drivers and extruder control electronics on an for Mega shield for easy service, part replacement, upgrade?ability and expansion..
  • A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Walther CP88 .177 Caliber Pellet Gun Air Pistol CP88 Competition

  • Outstanding workmanship and a simplified modular system.
  • Great for both experienced and novice air gun shooters.
  • Shoots .177 caliber pellets at up to 400 fps (CP88 Standard) or 450 fps (CP88 Competition).
  • Runs on easy-to-find 12 gram CO2 cartridges (CO2 NOT included).
  • Comes in a foam-lined plastic case and includes two 8-shot rotary mags.
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 Customized and Non-Standard Matching

  • 3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control....
  • With LCD 12864, you can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't....
  • It is designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • Please Note : No technical support for this product..
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

Anycubic Kobra 3D Printer Auto Leveling, FDM 3D Printers with Self-Developed ANYCUBIC LeviQ Leveling and Removable Magnetic Platform for DIY Home School Printing Size 8.7x8.7x9.84 inch

  • ...aptured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience..
  • Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
  • Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
  • Fast Printing & Large Printing Size: ANYCUBIC KOBRA 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.7×8.7×9.84in / 220x220x250mm, which has enough space and freedom to realize your fantastic creativity..
Check Stock