Reviews Cnc Waterjet Cutter

PMRACKS KLX250S KLX300 Rear Luggage Rack (2009-Present) Kawasaki KLX 250S KLX 300 KLX300SM 300SM 2013 2014 2015 2016 2017 2018 2019 2020 2021 Cargo Carrier

• FITS: Rear rack for KLX250S and KLX300 (2009-Present).
• RUGGED: steel construction. Professionally Mig welded single tube frame design..
• STAINLESS STEEL: installation hardware included..
• VIDEO SUPPORT: install video online and paper instructions included with order..
• ORIGINAL: cnc waterjet design. Sleek lines. Often imitated. Never duplicated..
• POWDERCOAT: thick, lightly textured industrial grade powdercoat. No poor quality coatings like the other guys..
• FREE: PMRACKS logo sticker with every order.
• LIFETIME WARRANTY: Bend it or break it, the new one is on us!.

Aquatic Custom Tile Porcelain Swimming Pool Starfish Mosaic ( 5"- Cobalt Blue) (Pack of 3)

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

• Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
• Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
• 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
• CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

• Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
• High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
• Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
• High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
• Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

ZCEN Mini Pipe Tubing Cutter for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass

• The main body of the pipe cutter is made of lightweight and durable aluminum castings, and the blades are made of CNC machining with most durable alloy steel..
• Rotate the knob to clamp the tube, Revolve the tube cutter around the pipe, and tighten the clamp steadily after each turn until it is completely cut..
• Designed for tight spaces, the height of 2 inches allows you to use it in cramped spaces on small diameter pipes..
• Used for cutting copper, brass, aluminum, thin steel, and PVC pipes with an outer diameter of 1/8 to 1-1/8 inches (3-28 mm). It's even used as a brake wire cutter or exhaust pipe cutter..
• If you have any quality issues with your Tube Cutter, please feel free to contact customer service for troubleshooting help, replacement, or refund..

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

• Comes With Blow Back iPTM-100 CNC machine plasma torch.
• IGBT Infineon Modules / Inverter technology.
• 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
• Up to 1 1/8″ clean cut with CNC (edge start).
• Pierce up to 5/8″-3/4″ with auto THC.