Reviews Cnc Steel Cutting

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

Fiber Optic Cutter, Thickened Slide Rail 3 in 1 Clamp Fiber Cable Cutting Tool with Hex Wrench for Electrical Repair

  • STABLE SLIDE RAIL: Using thickened slide rail, which has high rigidity, and the automatic knife return is and not stuck, which is convenient to use..
  • EFFICIENT CUTTING: The average cutting angle is less than 0.5 degrees, and the 16 sides cutting end face design ensures stable cutting, efficient and reliable..
  • 3 IN 1 CLAMP: This fiber cutter has 3 in 1 clamp design, which can cut 0.9mm pigtail slot, 0.25mm bare fiber slot and 2.5‑3.0mm insulated wire slot..
  • CNC MACHINING: Manufactured by CNC machining equipment, the fiber cutter has high accuracy and small operating error, with a wide application range..
  • TUNGSTEN STEEL: The cutting blade is made of tungsten steel, with high hardness, wear resistance and corrosion resistance, has a long service life..
Check Stock

BAYTORY CNC Spoilboard Surfacing Router Bits 1/4 inch Shank 1 inch Cutting Diameter Carbide Tipped Woodworking Planer Bottom Cleaning Tool Wood Milling Cutter Slab Flattening Surface Planing Bit

  • 3 Wings Wood CNC Surfacing Router Bits: Precise 3 Wings can cut your slab flattening project material quickly and cleanly. 1/4 Inch Shank, 1/4" Cutting height, 1" Cutting Diameter..
  • High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges with anti-kickback design. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • Great Design: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving..
  • Wide Range of Applications: Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • Applicable Equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. Wood engraving machines, trimming machines, etc..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/4 inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 3 Wings can cut your project material quickly and cleanly.1/4 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/4" Cutting height, 1/4" Cutting depth,1"(25.4mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

Stay Home [Explicit]

  • THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check Stock

LAIWOO CNC Router Bits Set 1/4(6mm) Shank, Engraving Wood Carving Router Bit 6mm & 4mm, 60° & 90° V-Groove, 20° Profile bit, 15° Detail Carving Bit, Tungsten Steel - 4PCS

  • 【PREMIUM MATERIAL】 Our cnc router bits is made of high hardness and wear-resistant tungsten steel, which is not only sharper but also less prone to breakage compared with ordinary carbide cnc bits, which will improve your work efficiency and completion..
  • 【EFFICIENT CUTTING PERFORMANCE】 These precision mirror-finished cnc engraving bits with scientific chip groove design prevents wood chips from affecting your work. Also the cutting speed is fast and the cutting surface is flat & smooth..
  • 【INVIDUAL PACKAGE】 4pcs package, each one is individually packaged for easier storage. Package contains 1 x 15° detail carver, 1 x 20° profile bit, 60° and 90° V groove bits..
  • 【WIDE APPLICATION】 These router bits for cnc are suitable for MDF, PVC, acrylic, solid wood, plywood, organic board, etc. Widely used for cutting/carving/engraving/grooving/drilling/positioning/roughing/milling. More suitable for wood carving..
  • 【PERFECT SERVICE】 We value our customers' experience, if you have any questions, our customer service team will reply within 24 hours. In addition, you will enjoy 12 months warranty, any quality problem we will solve for you!.
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock