Reviews Cnc Steel Cutting Machine

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Glass Cutter Head for CNC Machine,2 Pcs Tungsten Steel Cutting Wheel Replacement Cutter Head,Automatic Lathe Glass Cutter Replacement Knife Head for Cutting Most Glass Mirror Material

  • Sharp Tungsten Steel Wheel：Replacement Cutter Head for CNC Glass Cutting Machine is made of high-quality sharp and durable tungsten steel with stainless steel bracket.high hardness and not easy to crack..
  • High Carbon Steel Gasket：Glass cutter head with widened and thickened high carbon steel gasket, has good stability and safer operation..
  • Alloy Cutter Shaft：Bold alloy cutter shaft is firm and strong, rolling smoothly, smooth cutting, and more flexible when cutting glass..
  • Easy Identification：Laser engraving cutter head Degree for easy identification,easy to replace and install.
  • Application Scenarios：Glass cutting wheel perfect for cutting most glass mirror material,Glass cutter tools for machine use only,Do not cut manually.
Check Stock

Baltic Birch Plywood, 3 mm 1/8 x 12 x 8 Inch Craft Wood, Box of 8 B/BB Grade Baltic Birch Sheets, Perfect for Laser, CNC Cutting and Wood Burning, by Woodpeckers

  • THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock