Reviews Cnc Milling Blanks

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

  • ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
  • : ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
  • ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
  • ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
  • ➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

  • ★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
  • ★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
  • ★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
  • ★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
  • ★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
Check Stock

Home Sweet Home 3D Printer G-Code G28 X0 Y0 Z0 Joke Fun Fun T-Shirt

  • You love 3D printing, 3D printers, CNC milling and 3D models. Then you know yourself with G-codes, show it with humour with the Home Sweet Home G-Code....
  • Great gift for friends with 3D printers and CNC milling machines who are familiar with the words Hotend, Coldend, Extruder, Filament, Slicer, Nozzle,....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Milling Cutter, Fine Workmanship 3.175mm Milling Cutter, SMT for PCB

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock