Reviews Cnc Machining Service

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

sjlerst RC Spring RC Accessory, Upgrade Shock Absorber, Car Shock Absorber, Front&Rear for Axial for SCX10

  • ✿【Nice Replacement Accessories】☀Nice replacement accessories for the old or broken one..
  • ✿【Fine In Workmanship】☀Fine in workmanship and high in quality..
  • ✿【Double Spring Design】☀Double spring design for best performance..
  • ✿【CNC Machining Aluminum】☀CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance..
  • ✿【Widely Used】☀Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car..
Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock

MRELC Universal Motorcycle 7/8 22mm Handlebar Brake Master Cylinder Clutch Lever CNC Left & Right Set Compatible with Harley Honda Kawasaki Suzuki Yamaha（ Piston Diameter 12.7mm Blue

  • 【Compatible With】:Universal Motorcycle 7/8" 22mm Brake Master Cylinder Clutch Lever,uitable for most Chinese motorcycles. (Compatible with Eg Harley Honda Kawasaki Suzuki Yamaha).
  • 【Reasonable design】： Adjustable design, clear between each gear, not easy to slip. The pivot design allows the lever to fold outward to prevent bending or breaking in the event of a collision..
  • 【Material】：6061-T6 Aluminum Alloy， corrosion-resistant alloy, high hardness (up to HV90 degrees), good oxidation effect. There are no trachoma pores, and the flatness is better..
  • 【Processing technology】: Aluminum Alloy Lever Body + CNC pump.CNC machining process，stable machining quality, high machining accuracy,100% Brand New..
  • 【Package includes】: 1* Left pump + 1* Right pump +1*brake light switches).
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

LYunce RC Brake Disc RC Simulation Brake Discs CNC Machining Compatible with TRAXXAS TRX4 TRX6 ( Color : Yellow )

  • 1. Material: Made of high quality aluminum alloy material, which is wear resistant, rustproof and durable..
  • 2. Easy to Install: The fine appearance and perfect style, accurate size and shape make it easy to assemble and disassemble..
  • 3. Light and Thin: Light in weight, will not increase the burden of your remote control car..
  • 4. CNC Machining: The use of CNC machining technology makes it accurate in size and stable in performance..
  • 5. Good Fitment: The anodized surface is easy to install and can directly replace old or damaged ones..
Check Stock