Reviews Cnc Cutting

EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving

  • INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
  • SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
  • These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
  • The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..
Check Stock

LAIWOO CNC Router Bits Set 1/4(6mm) Shank, Engraving Wood Carving Router Bit 6mm & 4mm, 60° & 90° V-Groove, 20° Profile bit, 15° Detail Carving Bit, Tungsten Steel - 4PCS

  • 【PREMIUM MATERIAL】 Our cnc router bits is made of high hardness and wear-resistant tungsten steel, which is not only sharper but also less prone to breakage compared with ordinary carbide cnc bits, which will improve your work efficiency and completion..
  • 【EFFICIENT CUTTING PERFORMANCE】 These precision mirror-finished cnc engraving bits with scientific chip groove design prevents wood chips from affecting your work. Also the cutting speed is fast and the cutting surface is flat & smooth..
  • 【INVIDUAL PACKAGE】 4pcs package, each one is individually packaged for easier storage. Package contains 1 x 15° detail carver, 1 x 20° profile bit, 60° and 90° V groove bits..
  • 【WIDE APPLICATION】 These router bits for cnc are suitable for MDF, PVC, acrylic, solid wood, plywood, organic board, etc. Widely used for cutting/carving/engraving/grooving/drilling/positioning/roughing/milling. More suitable for wood carving..
  • 【PERFECT SERVICE】 We value our customers' experience, if you have any questions, our customer service team will reply within 24 hours. In addition, you will enjoy 12 months warranty, any quality problem we will solve for you!.
Check Stock

Freud 87-208 8Piece CNC Router Bit General Purpose Set, Multi, One Size

  • Advanced cutting geometry for superior chip evacuation and finish quality.
  • Enhanced TiCo super density Carbide with chromium designed and manufactured by Freud for 2x cutting life.
  • Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish.
  • Each bit in tis set was designed for CNC machines to deliver a long cutting life, maximum durability and a high quality finish. Ideal for sign making, lettering and engraving in a variety of materials like wood, plastics, composites and more..
Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

  • MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
  • 4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
  • 4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
  • American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

  • ★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
  • ★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
  • ★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
  • ★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
  • ★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/4 inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 3 Wings can cut your project material quickly and cleanly.1/4 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/4" Cutting height, 1/4" Cutting depth,1"(25.4mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

BAYTORY CNC Spoilboard Surfacing Router Bits 1/4 inch Shank 1 inch Cutting Diameter Carbide Tipped Woodworking Planer Bottom Cleaning Tool Wood Milling Cutter Slab Flattening Surface Planing Bit

  • 3 Wings Wood CNC Surfacing Router Bits: Precise 3 Wings can cut your slab flattening project material quickly and cleanly. 1/4 Inch Shank, 1/4" Cutting height, 1" Cutting Diameter..
  • High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges with anti-kickback design. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • Great Design: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving..
  • Wide Range of Applications: Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • Applicable Equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. Wood engraving machines, trimming machines, etc..
Check Stock