Reviews Cluth Brake Valve

Mission Automotive 16oz Brake Bleeding Kit - Easy Use One Person Brake Fluid Bleeder with Magnet Mount and Hanging Lanyard - for Car and Motorcycles Brake Systems 16oz Fluid Capacity

  • Brake Bleeding Made Easy! Our brake bleeder kit has been designed to make brake maintenance as easy as possible and help you get the job done from your garage without making excess mess..
  • How It Works: It couldn't be easier to use! Just attach the valve on out 12" brake bleeder hose to your brake system open the valve and pump a few times on the brake until the fluid hose is full with no air bubbles.
  • Includes Magnet Mount And Hanging Lanyard: No need to hold the bottle, Just attach to a magnetic metal surface OR use the lanyard to secure the bottle in an upright position to capture the brake fluid..
  • High Quality & Durable: Our brake bleeder kit is manufactured from durable oil resistant plastics with a flexible 12'' fluid tube and extra strong magnet..
  • For Use With All Brake Systems: Easy to use with all types of brake systems including cars, motorcycles, ATVs, dirt bikes, scooters,.
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

Allstar ALL48025 Brake Proportioning Valve

  • Proportioning valves allows adjustment of front-to-rear brake bias with a simple twist of the knob.
  • Valve provides up to 57 percent reduction and has fitting ports that are 1/8 npt.
  • Valve also includes two fittings to adapt to 3/16 inch brake line.
  • Dimensions are 1 inch long x 1-3/4 inch wide and 3-5/16 inch tall.
Check Stock

Earl s 1/2 Barb Brake Booster Check Valve-Clear

  • Anodized Black or Clear for Superior Corrosion Protection.
  • Fits Brake Boosters w/ 13/16” Hole for Grommet.
  • Valve Material: Premium FKM – Lasts Much Longer Than OEM Plastic & Rubber Valve.
  • Fits Most Brake Boosters w/ .588” Port (Inside Diameter of the Grommet).
Check Stock

AUTOPHIX 7610 Elite Full Systems Diagnostic Scan Tool for VW Audi Skoda Seat Automotive Full Functions OBD2 Scanner Code Reader Battery Registration Tool for All VAG After 1996 [2022 Version]

  • ...2 scanner is specially designed for Volkswagen/Audi/Skoda/SEAT Seriesit support Transmission,Brakes System,Air Conditioning,Central Electrics,Airbag System,Steering Column Eletronic,Dash Board, Auxiliary Parking Heater,Gateway System,Immobilizer System,Interior Monitoring, Central Locking Comfort,Parking Assistance,Cluth Control Unit,Active Steering, Brake Boost,Rear Spoiler System,Stabilizer System.7610 scanner supports 252 systems for VW group vehicles..
  • FULL OBDII DIAGNOSIS AUTOPHIX 7610 Enhanced OBDII scanner can read and earse the trouble codes that can cause emission problems with your vehicle, turn off the MIL (check your car engine) and I/M readiness ,read data stream,vehicle identification Info (VIN, CIN, CVN).Built in a DTC lookup library you can find the related code definitions to help you determine if your car needs repair, save you time and money..
  • HIGH EFFICIENCY, RELIABLE QUALITY, EASY TO USE AUTOPHIX 7610 car diagnostic tool via 2.8" TFT 262K true color LCD display screen to indicates the test results , with the silicone keypad you can easy to access the each of menu options, Rugged drop-proof case Prevent falling, the menu layout on the screen is easy to understand and you will no trouble to figuring out how to do what you needed..
Check Stock

EARL S PERFORMANCE PLUMBING 6An Male Brake Booster Check Valve-Clear

  • anodized black or clear for superior corrosion protection.
  • fits brake boosters w/ 13/16” hole for grommet.
  • valve material: premium fkm – lasts much longer than oem plastic & rubber valve.
  • fits most brake boosters w/ .588” port (inside diameter of the grommet).
Check Stock

ABN Brake Bleeder Kit Universal Vacuum Pump & Brake Bleeding Tester Set for Automotive Service & Airtight Food Canning

  • BLEED BRAKES OR CAN FOOD: Use the ABN Universal 2 in 1 Vacuum Pump and Brake Bleeding Tester Kit to service the brakes and test vacuum systems on your....
  • Attach the tubing to the bleeder valve on a disc brake caliper, pump the vacuum, crank the bleeder valve, and watch the....
  • BUILT TO LAST: Solid brass cylinder, cylinder head, and piston with anodized steel handle frame.
  • Cushioned pistol grip handle on vacuum pump for comfort and decreased user fatigue.
  • PACKAGE CONTENTS: Package includes a pump with precision gauge, two 2-foot tubes, multi-use adapters, and brake fluid reservoir.
Check Stock

PV2 Combination Proportioning Valve PV71 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve 172-1353 Front Drum Rear Brake fit for Ford Chevy Classic Car Truck

  • PV2 Brass Proportioning Valve replace part number:172-1353 (PV2), PV2 172-1353 PV71 Disc/Drum Brakes..
  • 172-1353 PV2 Front Disc Rear Drum Combination-Proportioning Valve fits most OEM dual-reservoir type master cylinders, Brake line ports are 1/2'' and....
  • PV2 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve widely applicable to most cars, fit for Ford Chevy Classic Car Truck..
  • This PV-2 proportioning valve is made of solid brass for durable and longer service life. Built with heavy duty feature..
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

PV2 Combination Proportioning Valve PV71 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve,172-1353 Front Drum Rear Brake fit for Ford Chevy Classic Car Truck

  • Performance Combination-Proportioning Valve replace part number:172-1353 (PV2) , 172-1361, PV2 172-1353 PV71 Disc/Drum Brakes..
  • 172-1353 PV2 Front Disc Rear Drum Combination-Proportioning Valve fits most OEM dual-reservoir type master cylinders, Brake line ports are 1/2'' and....
  • PV2 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve widely applicable to most cars, fit for Ford Chevy Classic Car Truck..
  • This PV-2 proportioning valve is made of solid brass for durable and longer service life. Built with heavy duty feature. Compatible with nearly all....
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock