Reviews Cloth Laser Cutter

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

ATEZR V35 Plus 160W Laser Engraver with KR PRO Chuck Rotary and KA Air Assist, 35W Output Power Laser Cutter, DIY Laser Engraver and Cutter Machine for Wood, Black Acrylic, Metal etc.

  • 【WORLD’S FIRST 35W LASER Engraver】Atezr V35 PLUS 35W Laser Engraver has 160W machine power and 34-36W laser power. This allows ATEZR V35 PLUS laser cutter to cut 18mm paulownia wood, 12mm black acrylic, and a maximum of 30mm paulownia wood, 40mm black acrylic in one go. Atezr V35 PLUS is the first 35W laser engraver on the market today, delivering unrivalled speed and precision for all your engraving needs. From wood to glass, Atezr V35 Plus can handle it all, creating deep, detailed engravings in no time. And, with faster processing times, you can complete engraving jobs quickly and efficiently, allowing you to take on more work and grow your business..
  • 【SUPER ACCURACY - HIGH-QUALITY WORKS】Atezr V35 PLUS Laser Engraver and Cutter Machine adopts spot coupling technology, the laser consists of six beams of diode lasers to achieve ultra-fine compression spots as small as 0.06 x 0.1 mm. You can achieve very sharp and precise lines and contours with Atezr V35 PLUS Laser Cutter, even when working with very complex designs. And a higher compression can provide faster processing times and reduce the likelihood of burning or scorching the material. Higher compression spots can also help reduce the amount o....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ...tra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect yo....
Check Stock

ATOMSTACK A20 PRO Laser Engraver, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine for Metal Steel

  • 【Get a free laser honeycomb table】Order an Atomstack A20 PRO laser engraver from Beruna Direct, click on "Available promotions" and then select "Add to cart" to enjoy buy one get one free. If you order an Atomstack A20 PRO laser cutter on your mobile phone, click on "Special offers for this item" and you will receive a free 380 mm x 284 mm laser honeycomb table..
  • THICKEST CUTS BY 20W HIGHEST LASER POWER: Atomstack A20 Pro laser cutting machine is the world's first 20W optical power diode laser engraver. With the latest generation of four 6W laser coupling technology, it can cut off 15-20mm thick tungsten board as well as the 8-15mm thick black acrylic board with only ONE PASS, and even cut the 0.05mm thick stainless steel sheet..
  • MORE PRECISE ENGRAVING: Atomstack laser cutting & engraving machine with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • SMARTER ENGRAVING & CUTTING: The ATOMSTACK APP is connected to the A20 pro laser cutting machine and supports both Android and Apple phone syst....
Check Stock

ORTUR Laser Master 3 with Foldable Feet, App Control 10W Laser Engraver and Cutter Machine, Laser Engraving Machine for Wood and Metal, Laser Spot 0.05x0.1mm, Engraving Area 400x400mm

  • ...Its cutting penetration and accuracy are twice of ordinary lasers which can cut 20mm pine board and 30mm acrylic sheet. 0.05*0.1mm ultra-thin square compressed spot makes the engraving effect more refined and outstanding..
  • [Faster Speed Laser Engraving Machine]: This Laser Cutter uses the latest upgraded 11th Generation of Laser Motherboard and the V2.0 Series Smart Laser Firmware. The 10W laser module comes with Integrated Air Assist, Dual Fans, and Foldable Focal Gauge all in only 235g Weight, which can work very well at a high speed of 20000mm/min under precision engraving and high-energy cutting, saving you over half the time as other similar brands..
  • [ALL-Metal Structure and Folding Design]: OLM3 Laser cutter is made of aluminum alloy, the modular structure is convenient for users to assemble quickly. The foldable feet use a more stable tilting structure, more durable high-quality aluminum alloy materials, and it is more convenient to use without multiple disassemblies. Perfect compatible with Ortur Rotary Roller to explore unlimited possibilities..
  • [Wide Compatibility and Connections]: ORTUR Laser Engraver is compatib....
Check Stock

UV Flatbed Printer with 3D Textured Raised Embossed for Glass/Plastic/Leather/PVC/Metal/Phone case

  • 【Ultra-fine and Powerful Laser Technology】 Makeblock xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/....
  • 【Higher Accuracy cutter and engraver machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and....
  • 【Cylinder Engraving & Larger Engraving Area】xTool D1 laser engraving machine can engrave huge diameter cylinders with a rotary attachment.....
  • 【Wide Compatibility and Multiple Connection Ways】xTool D1 portable laser engraver can be compatible with LightBurn and our beginner-friendly....
  • 【Simple to Use and Excellent Quality】The entire engraving machine has a modular design of aluminum alloy and can typically be assembled in 10-20....
Check Stock

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

  • ...Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
  • 【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protecting your eyes all the time. Equipped with air assist, it can reduce burn marks on cutting edge, making details more perfect. Blow away smoke and dust effectively to ensures the stability of laser energy while extending the life of the laser engraver..
  • 【Support Multiple Software & File Format】 Compatible with various mature engraving software, such as LaserGRBL(free), LightBurn (paid), support Win XP / Win 7 / Win 8 / Win 10 / MAC system (LightBurn). The engraving file format supports NC, BMP,....
Check Stock

Tamiya 74093 Modeler s Side Cutter α Alpha

  • Tamiya 74093 Modeler's Side Cutter Alpha.
  • This Modeler's Side Cutter is for use with plastic parts..
  • The side of the cutter features "FOR PLASTIC" laser inscribed..
  • The cutter's blades will remain sharp for a long period of time as they are made with hardened carbon steel..
  • The cutter comes with comfortable grey colored elastomer grips and feature the world famous Tamiya logo imprinted on them..
Check Stock