Reviews Close end Needle Bearings

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • ...ing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to i....
Check Stock

UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400

  • Application:265 V8 1955-1957///267 V8 1979-1982///283 V8 1957-1967///302 V8 1967-1968///305 V8 1976-1986///307 V8 1968-1973///327 V8 1962-1969///350 V8 1967-1986///400 V8 1970-1980.
  • These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55″ valve springs..
  • Specially cast and machined for larger valve springs and retainers Light weight with integral pushrod seat.
  • Oversize trunions and full roller precision needle and cage bearings More needle bearings for increased performance and rocker life CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance H.D. Polylocks included.
Check Stock

Body-Solid GFT100 Functional Trainer

  • ... E1 Training Bar. It has QPQ coating on sleeves to resist to corrosion. The knurl is optimized for advanced-level training. It's used for cross-training or weightlifting. Squat or deadlift with Mastery Training Bar is commonly practiced..
  • NEEDLE BEARING & SLEEVES:The Barbell sleeves are constructed with bushings and bearings. Each rotating sleeve is equipped with 5 needle roller bearings and a bushing, totally 10 needle bearings in the bar. Bushings provide a comprehensive smooth spin, bearings on the other hand are designed to spin fast and match the catching needs of the snatch and clean & jerk..
  • NO SWEAT GUARANTEE:Leave the sweating and swearing for your training! Buying from Elevens means quick, hassle-free, and caring customer service! Plus, we offer a better-than-money-back guarantee: if there is an issue with your product for any reason, we will send you a new one quickly and absolutely FREE! 100% Customer Satisfaction is our Number 1 Goal!.
Check Stock

GEARWRENCH 5 Pc. Mixed Mini Dual Material Plier Set - 82100

  • Set includes 4-1/2 in. diagonal cutting pliers, 5 in. long nose pliers, 5-1/2 in. needle nose pliers, 4-1/4 in. end cutting nipper pliers and 5-1/4 in. flat nose pliers.
  • Slim handle and head design for unparalleled access.
  • Solid flush rivet for better access and tighter tolerance.
  • Spring keeps handles open to reduce hand fatigue.
  • Forged from durably strong premium alloy steel.
  • Dual material handles offer a more comfortable grip and higher performance.
  • Mini long nose pliers allows access into tight spaces, will grip small parts and bends wire.
  • Mini end cutting pliers to cut through wire, nails, springs and more, the almost flat blade head allows you cut close against the surface without digging into it.
  • Mini thin needle nose pliers reach into narrow spaces to pull, bend, twist and grip wires.
Check Stock

Yellow Jacket Premium Skateboard Bearings – Titanium Coated, Ceramic Balls – Pro Longboard – High Speed, Precision for Skateboards, Longboards, in-Line Skates, (Black Venom - Washers and Spacers)

  • PREMIUM BEARINGS FOR ULTIMATE PERFORMANCE: Hop on your longboard or skateboard with confidence knowing you’re equipped with the highest-end bearing available from Yellow Jacket with these premium skateboard bearings..
  • HIGH-SPEED PREMIUM SKATEBOARD BEARINGS: Crafted with Si3N4 ceramic balls and titanium coated housing, these skateboard bearings offer the speed you need and durable construction for long-term use..
  • PRE-LUBRICATED PRO LONGBOARD BEARINGS: Feel the need for speed with these pro longboard bearings crafted with lubricant inside the wheels and bearings that offer minimal friction while navigating ramps and jumps..
  • DIVERSE PREMIUM BEARINGS: Outfit your skateboard, longboard or in-line skates with these premium bearings that offer a smooth ride and less friction, even in the most active scenarios..
  • VIVID DESIGNS: Each of these high-end bearings feature engraved color seals to accentuate your style and to offer protection from overuse, dirt, dust and rocks..
Check Stock

All Balls 28-1005 Swing Arm Bearing Kit

  • Specs: Swing Arm Bearing Kit, Needle Bearings 52100 bearing steel ARC6.
  • POM composite washer bearings replace thrust needle washers for superior resistance twater and dirt and increased service life.
  • Compatible With/Replacement For: Suzuki LT-250R 1985 - 1992, LT-500R 1987 - 1990.
  • 100% New aftermarket Swing Arm Bearing Kit built to meet OEM specifications.
Check Stock

Camshaft Lifters Kit NON-MDS w/Head Gasket Cover Kit Compatible with Chrysler Jeep Dodge Charger Durango 5.7L Hemi 2009-2018 Part# 53021720BB 53021720AB AKWH

  • ... issues cam load issues later on especially if it’s motor pushing high horsepower..
  • 【Install Notes】Before install your lifters make sure to look at the general cleanliness of engine. Soak the lifters overnight in comps break-in oil this will give it really good lubrication on the outside fill up all the needle bearings and you’ll get rid of most of the air in the plunger assembly. Taking some simple precautions to keep that dirt and debris from getting into your oil system during installing..
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

45 Pound Free Weight Plate Taken off Bar Take 2

  • ...on and improves the grip experience. The knurling design can also effectively reduce the tension in the wrist and forearm, increase the safety of sports and ensure comfort.
  • [Needle Bearing & Sleeves] The sleeves of barbells are often constructed with either bushings or bearings. Our Olympic bar sleeves are friction welded, it's stronger than normal welding sleeves. Each of the rotating sleeves with 4 needle bearings and one bushing, totally 8 needle bearings in the bar. Bushings provide a moderate rotation, bearings on the other hand are designed to spin fast and match the catching needs of the snatch and clean & jerk.
  • [Spec] Our barbell bar adopts refined design to meet your every strength training. The bar weighs 44 pounds (20 kg) and is 86.61 inches (7-foot) long. The length of the sleeve that can be loaded is 16.4 inches, suitable for a 2-inch barbell. The medium knurled design of 28mm satisfies your picky details. Is your high-quality choice for training.
  • [Muitiple Usage Weighting Bar] The barbell bar can meet all your training needs. Especially your legs, buttocks and back. This can not only carry out end....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • ...ded: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to i....
Check Stock