Reviews Clevis Thread

3/8 Clevis Slip Hook 4 Pack Forged G70 Steel Clevis Hook with Safety Latch for Deck Hauler Receiver Hitches Trailer Wiring Chain Hooks Solid Clevis Grab Hooks for Trailer 18,000lbs Capacity

  • 【3/8INCH GRADE 70 CLEVIS HOOKS 】Forged steel construction and precision heat treatment which rated for heavy-duty loads up to 18,000 lbs gross trailer weight..
  • 【QUICK RELEASE】This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed..
  • 【HEAVY-DUTY CLEVIS SLIP HOOKS WITH LATH】Ideal for industrial and commercial towing clevis hooks are made of forged G70 high-carbon steel with rust-resistant chromate finish..
  • 【SPRING-LOADED SAFETY LATCH HOOK】 The latch ensures a safe chain connection that the rope, chain, and accessories will not separate from the hook when the load is slack.
  • The clevis hooks with a latch are quipped with a keeper pin, safety latch to easily attach the safety chains from the trailer to the towing vehicle..
  • 【APPLICATION】Our 3/8 inch Clevis Hooks are so heavy-duty, make them easy to use on utility trailers,truck, flatbed trailers, etc.It meets requirements for transport, high-test, and alloy chain..
Check Stock

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

3/8 Clevis Slip Hook with Safety Latch 4 Pack Heavy Duty Clevis Chian Hook for 3/8 Grade 70 Transport Chain 6600LBS Capacity for Heavy Load

  • HEAVY DUTY CLEVIS SLIP HOOK: Chain clevis slip hook constructed from grade 70 high-strength and heat-treated forged steel for heavy load up to 6600lbs gross trailer weight.
  • Gold zinc-plated finish enhance corrosion resistant for outdoor use.
  • EFFICIENT PERFORMANCE SLIP HOOK: G70 Clevis Slip Hooks with safety latch are paired with required transport chain for heavy-duty cargo control. Forged Clevis slip hooks are designed with a wider throat than grab hooks which allows the chain to slip through the hook in order to hold it securely.
  • SAFETY LATCH FOR QIUCK RELEASE: Heavy duty slip hooks with a safety latch for 3/8" Grade 70 transport chain. Exclusive design and spring-loaded safety latch help ensure secure attachment and quick release to prevent the hook from coming off during transit.
  • MEETING YOUR REQUIREMENT: Clevis hooks are heavy-duty hooks for connecting safety chains or transport binder chain. Meeting the requirements for high-test, transport and alloy chain that is perfect for latching down heavy cargo and securing large loads in commercial and industrial applications.
  • 4PCS 3/8" G70 CLEVIS SLIP HOOK: There is 4pcs 3/8" G70 safety slip hook which provides good performance for connecting safety chains or transport binder chain.
Check Stock

5/16\ G70 Clevis Slip Hook with Safety Latch, 4 Pack Heavy Duty Slip Hook for 5/16\ Grade 70 Transport Chain, 4400LBS Capacity for Heavy Load

  • HEAVY DUTY CLEVIS SLIP HOOK: Chain clevis slip hook constructed from grade 70 high-strength and heat-treated forged steel for heavy load up to 4400lbs gross trailer weight.
  • Gold zinc-plated finish enhance corrosion resistant for outdoor use.
  • EFFICIENT PERFORMANCE SLIP HOOK: G70 Clevis Slip Hooks with safety latch are paired with required transport chain for heavy-duty cargo control. Forged Clevis slip hooks are designed with a wider throat than grab hooks which allows the chain to slip through the hook in order to hold it securely.
  • SAFETY LATCH FOR QIUCK RELEASE: Heavy duty slip hooks with a safety latch for 5/16" Grade 70 transport chain. Exclusive design and spring-loaded safety latch help ensure secure attachment and quick release to prevent the hook from coming off during transit.
  • MEETING YOUR REQUIREMENT: Clevis hooks are heavy-duty hooks for connecting safety chains or transport binder chain. Meeting the requirements for high-test, transport and alloy chain that is perfect for latching down heavy cargo and securing large loads in commercial and industrial applications.
  • 4PCS 5/16" G70 CLEVIS SLIP HOOK: There is 4pcs 5/16" G70 safety slip hook which provides good performance for connecting safety chains or transport binder chain.
Check Stock

4Pack 3/8” Clevis Hooks with Latch Forged G70 Steel Clevis Slip Winch Hook for Trailer Safety Chain Hooks Solid Clevis Grab Hooks for Deck Hauler Receiver Hitches Trailer Wiring-18,000lbs Capacity

  • Heavy Duty Clevis Slip Hooks with Lath: The 3/8" chain hooks are made of forged G70 high-carbon steel with rust-resistant chromate finish, ideal for industrial and commercial towing.
  • 3/8” Clevis Hooks for Chain Link: Package includes 4PCS 3/8” chain clevis hook, forged steel construction and precision heat treatment, 18,000lbs limit capacity.
  • The safety sling hooks are built to last and attach easy to transport chain or receiver hitches.
  • 1” Hook Opening for Large Anchor Points: The steel clevis hooks feature a wider throat than the grab hooks, which adapt to different trailer setups and hitch loops, allows the chain to move freely through the close hook.
  • Spring-Loaded Safety Latch Hook: The clevis hooks with latch is quipped with a keeper pin and safety latch to easily attach the safety chains from the trailer to the towing vehicle.
  • The latch ensures a safety chain connection that the rope, chain and accessories will not separate from the hook when the load is slack.
  • Wide Applications: The clevis slip winch hooks are easily attached to chains and wire ropes and are widely used for safety chains on utility trailers and trucks.
  • such as towing vehicle, pulling trees and brush, hanging chair, locking heavy loads and securing large cargo.
Check Stock

4Pcs 5/16'' Clevis Hook with Latch,Safety Hook G70 Tow Chain Clevis Grab Hook for Trailer Truck Transport Tow Chain Hook

  • HEAVY-DUTY CLEVIS SLIP HOOK: 5/16 inch Grade 70 Clevis Hooks make your job easier and give you peace of mind when you know your cargo, load is secured by Grade 70 clevis hooks with the higher working load limit than lower grade hooks..
  • EASY TO USE - The shallow throat opening allows for easy and secure connections with 5/16 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • QUICK RELEASE-This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin..
  • SOLID MATERIAL-Forged with high-strength, low-alloy carbon steel and precision heat treatment, and coated with a yellow zinc chromate finish for quick identification..
  • APPLICATION-These grade 70 5/16 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc.It meets requirements for high-test, transport and alloy chain..
Check Stock

LordHardware Stainless Steel 3/8 Inch M10 Jaw and Jaw Turnbuckles for Tensioning Cable Rope Chain, 1200 lbs Load, 2-Pack

  • Made of 304 stainless steel that protects against corrosion.
  • Jaws on each end allow easy connection to eyes with a clevis pin and cotter pin.
  • Create tension in cables, ropes, tie rods and chains.
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

4 Pack 3/8 Inch Clevis Slip Hook, Clevis Safety Hook with Safety Latch, Clevis Rigging Tow Winch Trailer, 18,000 Lb Capacity，1 in Opening

  • 【Reliable Strength】3/8 inch grade 70 clevis hooks with high-strength, forged steel construction and precision heat treatment which rated for heavy-duty loads up to 14,000 pounds gross trailer weight..
  • 【Secure Attachment】This clevis grab hook has a grade of 70 ratings, offering enhanced tensile strength, increased resistance to abrasion, and instilling greater confidence in your towing rig..
  • 【Quick Release】This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin..
  • 【Corrosion-resistant】To promotes long-lasting use and dependable strength for miles to come, this clevis hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements..
  • 【Application】These grade 70 3/8 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc. It's great for connecting heavy-duty safety chains or securing transport binder chains. It meets requirements for high-test, transport and alloy chain..
Check Stock

4 Pack 5/16 Inch Clevis Slip Hook Clevis Safety Hook with Safety Latch Clevis Rigging Tow Winch Trailer 14,000 Lb Capacity 3/4 in Opening

  • 【Reliable Strength】5/16 inch grade 70 clevis hooks with high-strength, forged steel construction and precision heat treatment which rated for heavy-duty loads up to 14,000 pounds gross trailer weight..
  • 【Secure Attachment】This clevis grab hook has a grade of 70 ratings, offering enhanced tensile strength, increased resistance to abrasion, and instilling greater confidence in your towing rig..
  • 【Quick Release】This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin..
  • 【Corrosion-resistant】To promotes long-lasting use and dependable strength for miles to come, this clevis hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements..
  • 【Application】These grade 70 5/16 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc. It's great for connecting heavy-duty safety chains or securing transport binder chains. It meets requirements for high-test, transport and alloy chain..
Check Stock