Reviews Clear Zinc Roofing Screws

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

#12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
Metal Screws are painted to closely match many brands of metal roofing though color may vary.
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
#10 Sheet Metal roofing screws are galvanized for corrosion resistance.

#10 Sheet Metal ROOFING SCREWS. Our metal roofing screws are galvanized for corrosion resistance..
1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head.
Metal Screws are painted to closely match many brands of metal roofing though color may vary.
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).

ASTM Tested and ISO 9001:2015 Standard. All of ACE Screws are tested by Element Materials Technology and SGS laboratories for quality assurance.
Ace Screws SKINNYnSTRONG 3" Insulation Plates are designed to be used with Ace Screws FATnSTRONG Roofing Fasteners to secure insulation as required by....
SGS Pull Out Test Results 18ga, 20ga, 22ga Steel Decking: 500.94 lbf.
Material: AZ150 (AZ50 Galvalume) aluminum-zinc coated steel.

Dimensions: Diameter .203" - Width .438" - Head Height .094" - Length 1.5" - Use T25 Torx/Star.
Ultra-thin flush finish pancake head fastener for Metal to Wood standing seam roofing applications.
Low profile pancake head fastener with sharp point tip, easily push through pre-drilled metal panels.
Screws have a zinc coating to prevent rusting and corrosion.
Low Profile, thin pancake head screws lay flush prevents screw head from dimpling panels.

The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
Ace Plates go through continuous Quality Assurance testing by third party companys..

The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
Ace Plates go through continuous Quality Assurance testing by third party companys..