Reviews Clamp With 4 Bolts

Thrashin Supply Company TSC-2700-1 1in. Handlebar - Mid Bend - Black

  • Handlebar Risers with a One Piece Top Clamp with 4 mounting screws..
  • Will work on any Harley handlebar that is 1"' thick in the clamping area..
  • Engineered to increase the rigidity and stability of the handlebar..
  • 3 1/2” center to center at riser mounting holes. Base hole tapped for standard 1/2" * 13 mounting bolts (Bolts not included) (Standard Size)..
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

POWERTEC 71438 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 1/4 Inch hex head Bolts – 2 Pack

  • INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
  • FUNCTION: Designed to fit any standard t-track that accepts 1/4” hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
  • VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
  • CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Compatible with Kreg, Incra, Peachtree Mini and other ¼” T Track..
  • PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check Stock

Rockler T Track Inline Cam Clamp – Mini Cam Clamp - T Track Clamp for T-Track Stops – Rubber Small Clamps for Marring or Slippage - T-Track Accessories

  • T-Track Inline Cam Clamp: Just slide these mini clamps into your T-track and pull the lever to secure your work in the position. Use these mini heavy duty clamps with any T-track that accepts 5/16” T-bolts..
  • Little Cam Clamps: When paired with a T-track table and one or more of our optional T-Track Stops (#50603, sold separately), this cam clamp provides just enough pressure to keep your work in place as you machine the unobstructed surface..
  • High Quality: The strip of rubber on the mini clamp face helps to reduce the chance of marring or slippage. The T track clamps bottom is also faced with rubber and features an inline keyed slot that locks into the T-track for further stability..
  • What’s Include: Use our cam clamps with any T-track that accepts 5/16'' T-bolts, including our optional T-Track Table and many CNC tables..
  • Low Profile Clamp: Thanks to the low profile clamp face (only 5/8'' high), you can easily sand without hitting the clamp..
Check Stock

Sresk Pullback Handlebar Risers with One Piece Top Clamp for H-D Handlebars with 1' Clamping Area (Black, 8')

  • Handlebar Risers with a One Piece Top Clamp with 4 mounting screws..
  • Will work on any Harley handlebar that is 1"' thick in the clamping area..
  • Engineered to increase the rigidity and stability of the handlebar..
  • 3 1/2” center to center at riser mounting holes. Base hole tapped for standard 1/2" * 13 mounting bolts (Bolts not included) (Standard Size)..
Check Stock

1 Pcs 1Kg 304 Stainless Steel Square Glass Clamp Railing Spigot, Deck Spigot Fence Balustrade Railing for Pool Balcony Stair Panel Mounting Bracket, Clamp 3.8x3.8x6.3\ for Glass Thickness 8 to 15mm

  • HIGH QUALITY- This square glass clamp is made of 304 stainless steel with integrated molding technology, high strength, durable, suitable for both outdoor and indoor applications..
  • EASY INSTALLATION- No holes required for glass panels, you can fix the glass firmly on the panel by rotating two screws included. Perfect for glass swimming pool, glass garden, balustrade, staircases on residential and commercial applications..
  • ADJUSTABLE- Suitable frameless glass panels with a thickness of 8mm(5/16”), 10mm(3/8”), 12mm(1/2”), and 15mm(3/5”). All accessories are included to help you control the room of the clamp..
  • STYLISH- The glass railing clamp is polished with a smooth surface for a modern and neat look. Fit horizontal and stair railing projects..
  • PACKAGE INCLUDED- 1 square glass clamp, 1 lid, 4 anchor bolts, 4 rubber gaskets..
Check Stock

Bestop 9003435 Black Diamond Duster Deck Cover Extension for 2007-2018 Wrangler Unlimited

  • Truck Camper Mounting Clamps Set of 4 - Designed to mount the truck camper shell to your truck. These mounts are universal and are made of aluminum steel that is corrosion free and strong at the same time. Purposely large clamps that are powder coated and fits a wide array of camper shell models for almost any truck..
  • Drilling mounting holes into your truck or camper is a hard commitment to make as they are permanent and may look ugly in the long run when you decide you don't want them anymore, these clamps get rid of that commitment while still providing the same tight fit and security of mounting your camper shell by drilling..
  • Strong Aluminum construction that is powder coated with black provides that stealthy and simple but elegant look which matches all types of surface beautifully. Strong and durable and does not deform easily. Unique 2 piece chuck design requires no special tools and can be installed and uninstalled in minutes. Installation is easy specially for beginners and first timers..
  • Specifications - 1.43 inch clamp height, 1.12 inch clamp width. See images for complete measurements. Universal fit designed to fit most pick-up truck models with quick tightening bolts using a wrench or ratchet perfect for mounting fiberglass truck caps or al....
Check Stock

Muzata Glass Clamp Stainless Steel Square Polished for Panel Pool Deck Fence Balustrade Railing Post Garden Balcony with Expansion Bolt 1Pack GS10 SO4, GR1

  • High Quality- This square glass clamp is made of T304 stainless steel with integrated molding technology, high strength, durable, suitable for both outdoor and indoor applications..
  • Easy Installation- no holes required for glass panels, you can fix the glass firmly on the panel by rotating two screws included. Perfect for glass swimming pool, glass garden, balustrade, staircases on residential and commercial applications..
  • Adjustable- suitable frameless glass panels with a thickness of 8mm(5/16”), 10mm(3/8”), 12mm(1/2”), and 14mm(9/16”). All accessories are included to help you control the room of the clamp..
  • Stylish- the glass railing clamp is polished with a smooth surface for a modern and neat look. Fit horizontal and stair railing projects. Please search for Muzta GS10 SN4 to find square glass clamp with a satin finishing..
  • Package Included- a square glass clamp, 4 anchor bolts, a rubber gasket, and a foot cover are included..
Check Stock

OTC 4534 Multi Purpose Bearing and Pulley Puller Set

  • For a wide range of pulling jobs including: bearings.
  • alternator, generator, power steering, and crankshaft pulleys.
  • Drop-forged components can be used in a variety of combinations.
  • Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches.
  • Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts.
  • Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed.
Check Stock

ChangTa GMX600NM Noryl Flange Valve Clamp Replacement for Hayward S144T Pro Series Pool Sand Filter

  • Sand Filter Flange Clamp : Fits Hayward pro series sand filter S144T and other sand filter valve clamp models .（Notice ：This clamp will NOT work on Bestways or Intex Filters.It only applies to Hayward.）.
  • Fits hayward variflo xl clamp : compatible with hayward Pro-Series Sand filtr the following models, S144T, S164T, S166T, S180T, S210T, S210S, S220T, S220T2, S230T, S244T, S244T2, S244S, S270T, S310T, and S360T for hayward Above Ground , In Ground Pools filter ..
  • Pro Series Sand Filter Parts : Our valve clips are made of heavy duty durable plastic material. Very solid construction. -Keep your sand filter in top condition by replacing worn valve clips! This simple valve clamp will save you expensive repairs..
  • Pool Sand Filter Replacement Kit : Include valve clamp,Nuts and Bolts.easy to connect and tighten .It is recommended that you first tighten by hand and then use a tool to tighten slightly to avoid damaging or cracking the valve seat.
  • Please note: For your correct use, please confirm the size before purchasing, please refer to Figure 4, it can fit 8 to 8.5 diameter sand filter, note that this part is not suitable for 12 inch sand pump..
Check Stock