Reviews Circular Saw Clamp Guide

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

Bora 543042K 36 WTX Clamp Edge & Saw Guide Kit

  • Rigid aluminum straight edge guide with 36-inch capacity for making straight and accurate cuts.
  • The saw guide works with most circular saws to help keep your saw straight to make accurate cuts.
  • Fits right and left handed circular saws.
  • Saw guide fits right handed and left handed circular saws.
Check Stock

30'' Aluminum Clamp and Cut Edge Guide Fixture Clamping Cutting Guide Bar Handle Lock

  • 30'' aluminum clamp and cutting edge guide.
  • Clamp across boards to provide a firm straight edge for accurate circular saw cuts.
  • 3 position cam lock action for strong hold.
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

BORA 4-piece NGX Compact Set

  • Includes 24" NGX clamp edge, 25" NGX clamp edge extension with connectors, rip handle, saw plate.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • For use with circular saws, routers, jig saws, and other portable power tools to achieve track saw like cuts.
  • Can be used on right- or left-handed circular saws — no tools necessary to switch.
Check Stock

13.4inch Track Saw Square Guide Woodworking 90° Right Angle Circular Saw Guide Rail Angle Stop Accessories Compatible with Festool/Makita Guide Rail

  • 【Excellent features】 Designed with standard right angles, this circular saw guide ensures a high level of precision in woodworking. The circular saw guide system allows for quick and accurate setting of slicing or milling angles, allowing precise and repeatable 90-degree cuts with the guide without the need to readjust the angle for everyday use or work on your engraving needs..
  • 【UNIQUE DESIGN】The hollow design of the electric circular saw track makes it very light and easy to use, whether for daily use or to carry is very convenient.
  • 【Easy to use】Easy to install and disassemble, just a few steps to complete the installation without too many complicated steps. Use your electric circular saw for a perfect carving experience, a great tool essential for beginners..
  • 【High quality material】90-degree right angle guide made of aluminum alloy and stainless-steel material, with the characteristics of not easy to damage or bend, strong and durable, light weight.
  • 【PRACTICAL TOOL】Cutting machine fixing bracket for precise cutting of wood. Can be used as a clamping device fo....
Check Stock

Saw Guide Tracks for Circular Saws (12 Feet) – Durable Cross Cut Guide for Making Straight Cuts! Lightweight, Easy to Assemble Guide Rails for Woodworking! (Stone Coat Countertops)

  • INCLUDED IN THIS KIT - (3x) 47.75” Aluminum Saw Guide Tracks, (1x) Universal Circular Saw Mounting Plate, (1x) Mounting Hardware Pack.
  • MAKE PERFECT CUTS – Convert your circular saw into a high-performance, track-guided cutting tool with the Saw Guide! Make perfectly straight cuts every time! Save time and money on your next project with woodworking accessories from Stone Coat Countertops!.
  • DITCH YOUR TABLE SAW – No need to cut jumbo sheets of wood on a table saw! No need for an expensive crosscut sled! The Saw Guide will make your cuts cleaner, faster, easier, and more affordable!.
  • NO MORE WASTED MATERIAL - The Saw Guide gives you a clean, smooth edge every time! Break down sheets of MDF or plywood with ease! Less wasted material means you save more money!.
  • STRONG AND LIGHTWEIGHT – Aluminum Saw Guide Tracks are sturdy enough to stand up to any job! Lightweight enough to carry from one job site to the next! Great for woodworkers, professional contractors, remodelers, craftsmen, DIY enthusiasts, and so much more!.
Check Stock

GALAX PRO 4Amp 3500RPM Circular Saw with Laser Guide, Max. Cutting Depth1-11/16'(90°), 1-1/8'(45°）Compact Saw with 4-1/2' 24T TCT Blade, Vacuum Adapter, Blade Wrench, and Rip Guide

  • Powerful circular saw: 4-amp electric motor – delivers a no load speed of 3,500 rpm – easily cuts through wood, PVC tubing, laminate flooring, plastic, plasterboard and MDF. Includes an 24T Tungsten Carbide Tipped Blade 4-1/2 in diameter. Arbor Size: 3/8in.
  • Laser guide and bevel lever: This mini saw comes with laser beam guide and the scale ruler, which can assist you to cut a straight line for when high precision is needed. Accurate cuts are assured by the parallel guide and laser light. Angle adjustment for bevel cuts of up to 45°.
  • Depth gauge lever and dust extraction system: This mini circular saw can adjust the cutting depth anywhere from 0 to 1-11/16"(42.8mm) with a max. cut of 42.8 mm in order to adapt to perform better when cutting different materials. Leave your working area free of dust with the vacuum adaptor, for more precise cuts and helping you to focus on the task without the mess.
  • Compact & handy circular saw: Compact body and lightweight perfect for one-handed operation.
  • it features ergonomic soft handles for better hand-feeling and provides optimum cutting line visibility for tight detail work.
  • What you get: 1* Mini Circular saw, 1* 24T tungsten-carbide-tipped wood/plastic blade, 1* allen key for saw change, 1* rip guide, 1* v....
Check Stock