Reviews Circuit Board Wire

AWBLIN Upgraded Automotive Buzzer Test Light 4-60V DC Digital LED Circuit Tester, Heavy Duty Light Tester with Voltmeter, Auto Bidirectional Voltage Tester Electric Test Pen

  • ...d structure design of the probe protection cover, needle guard function is added to ensure that there will be no stab wounds and the guard will not be lost. Convenient to carry and take it wherever you go..
  • [LED INDICATION, BIDIRECTIONAL VOLTAGE TESTING]: This upgrade circuit test light is a bidirectional voltage tester. You can attach the alligator clamp either to negative or positive ground, there is also a light emitting diode on the circuit board for polarity indication, red light indicates positive polarity and green light indicates negative polarity..
  • [BUZZER WARNING]: The LED light will be on and there will be a buzzing sound during the test..
  • [COMPUTER SAFE, DURABLE & FLEXIBLE]: The professional auto circuit tester has a built-in circuit board chip, which is safer and more durable than traditional test lights and prevents the car computer board from burning out. Spring wire can be freely stretched up to 102 inches, with a wide measuring area.
  • Anti-bending design of the tail wire, no need to worry about bad contact of the line..
  • [WIDER VOLTAGE RANGE] Compared with t....
Check Stock

Professional welding tools and desoldering tool sets (12 pieces), desoldering pumps, desoldering wicks, wire cutters, tweezers, welding wire, soldering iron auxiliary accessories

  • Tool Kit：Suitable for electronic repair and DIY, any circuit board with small parts, such as mobile phone motherboards, cables, TVs, VCRs, radios, headphones, stereos, motors, toys and other electronic equipment. Correct the error of the small board on the PCB..
  • Tool Kit：includes 6 welding aids and desoldering pump, desoldering core, Wire cutters, anti-static ESD tweezers, 0.8mm solder wire.
  • Welding auxiliary tools: widely used in electronic repair, soldering, desoldering, etc. Can use cutting, scraping, hooks, brushes and other welding work requirements. Cutting pliers: Made of high-quality steel, it can accurately cut flexible cords within 1mm. Anti-static ESD tweezers: Made of high-quality stainless steel, anti-static, non-sticky..
  • Desoldering pump: very sturdy, can remove excess solder on the circuit board, easy to operate with one hand, desoldering core:width 2.5mm / 0.098 in,length 1.5m / 59 in length, made of pure oxygen-free copper It has a strong ability to absorb tin. No cleaning is required and less residue. Solder wire: 0.35 ounces / 10 g.
  • Tool Kit: Contains 12 necessary welding tools to save you multiple purchases..
Check Stock

TBBSC Lead Free Solder Wire Fine Alloy Solder Sn99.3 Cu0.7 for Electrical Soldering (0.8mm 50g)

  • Solder Wire Diameter is 0.032in ( 0.8mm ), gross weight 50gram (0.11lbs),suitable for fine soldering work on connector, wire, IC, Capacitor etc..
  • High quality lead free solder wire,The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth..
  • Lead free solder wire designed for electrical maintenance, such as radios, televisions, video recorders, stereo systems, wires, motors, circuit boards and other electronic devices..
  • Very good soldering capability, flow well during soldering, easy for soldering,esp for circuit board, DIY, home improvement..
  • Well Packed for Secure Shipping easily maintained transportable and easy to use Make it yours today..
Check Stock

4 in 1 Internal USB Splitter Cable Electop 9 pin USB Header Male 1 to 4 Female Extension Connector Adapter USB 2.0 HUB Connector Port Multiplier PWM Fan Splitter Cable 30cm/0.98ft

  • Product Type: 9 Pin, Main board USB 2.0 Male 1 to 4 Female.
  • Wide Applications: It can be widely applied to Host DIY Light Bar, Host Fan ,Extended USB Interface ,Other 9 pin USB 2.0 Support Devices..
  • Prevent Short-circuit: Prevent short circuit outlet design.To prevent accidental removal of circuit board,pins in case short circuit..
  • Easy Installation:Wire belt shielding,with 3M adhesive back glue, can be directly fixed on the main board or chassis..
  • Package Includes: 1* 9Pin USB Header Male 1 to 4 Female Extender,Cable Length(approx.) 30cm(11.8 Inch).Any questions,feel free to contact us via....
Check Stock

DORHEA 3 Set Electronic Flashing Lights Soldering Practice Board LED NE555 CD4017 IC LED Electronic Lights Kits Red Blue Dual-Color DIY Kit Strobe Electronic Suit Flashing Lights Components DIY

  • The circuit working voltage: DC9-12V. The product does not include battery. It is simple to make, has obvious effect and is interesting. The circuit can be used for electronic toys, art lighting, LED billboards ,ect..
  • This suite adopts simulation light circuit made with NE555 and CD4017, the blue LED and red LED flashed alternately according to the pulse. The multivibrator composed of NE555 will have a certain frequency of oscillation signal send to CD4017 decimal counter/pulse distributor, in order to count..
  • This is a very interesting circuit for simulating the visual effects of warning lights, blue and red lights flash alternately according to the pulse respectively. This kit is simple to assemble, suitable for electronics enthusiasts and students to practice. Design optimized for training, it adopts 1.6mm electric board and nice layout of the components..
  • Specially designed for the training, cost-effective, red diodes and blue diodes can be opened with wire connections to expand the lamp distance, the original board number and model on the circuit board, the right seat can be installed..
Check Stock

Swimables 42002-0007s Control Board Kit for Mastertemp & Max-E-Therm Pentair Pool and Spa Heater - Made in USA

  • Installation: Begin by removing the old circuit board by shutting down all power and opening the top of the heater to have access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board..
  • Installation(2): Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out..
  • Installation(3): Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater..
  • Compatibility: This board will work on the following models: Mastertemp 200, Mastertemp 250, Mastertemp 300, Mastertemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805..
  • 100% Satisfaction Guaranteed: Buy with confidence, as our premium quality control boards are built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check Stock

Hifonics ZG-1800.1D ZEUS Gamma 1800w Car Audio Class D Mono Amplifier+Amp Kit

  • Package Includes: (1) Hifonics ZG-1800.1D ZEUS Gamma 1800 Watt Mono Amplifier Car Audio Class D Amp, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's.
  • Features of ZG-1800.1D: Low Noise Preamplifier Circuit: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion, RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant, High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power, Operation Mode: Mono only.
  • Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation..
  • Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connecti....
Check Stock

AudioQuest Black Lab RCA Male to RCA Male Subwoofer Cable - 39.37 ft. (12m)

  • Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper..
  • Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy..
Check Stock

MG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool

  • Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more.
  • Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed.
  • Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
  • With the solder wire reel, soldering can be accomplished quickly..
  • Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
  • Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check Stock

FlySight 5.8GHz 32-Channel A/V Transmitter, 400mW (TX5804)

  • ★503040 rechargeable lithium ion polymer battery, nominal voltage 3.7V, full charge voltage 4.2V, capacity 620mAh, power 2.29Wh, size 5×30×40.5mm(0.197×1.181×1.598inch）(T*W*L), Weight:13g(0.46oz)，Maximum current:0.6A。 It can prevent overcharge, overdischarge, overcurrent, and short circuit..
  • ★It‘s consists of of large-capacity A+ lithium battery, Japanese Seiko IC overcharge and overcurrent short circuit protection board, 3302-26 high temperature resistant silicone cable, and genuine JST Pitch1.25mm 2-pin connector module..
  • ★Please carefully compare the polarity of the connector before use,the red wire is the positive "+" and the black wire is the negative "-"，Do not reverse-charge or reverse-connectreverse. The primary battery of some products has no plug or mismatched plug or mismatched polarity. It doesn't matter, you can cut and solder the plug directly or use our heat shrinkable insulating sleeve to connect the same color wire..
  • ★If there is any quality problem within one year。 please contact us in time，it will be replaced free of charge..
Check Stock