Reviews Chevy Small Block Turbo Kit

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

Brand New Southwest Speed Front Engine Mounting Kit that includes O.E. Replacement Front Engine Mounts, and Powder Coated Black Engine Mounting Brackets that fits 1955-1957 Chevy's with Small Block Chevy V-8 Engines (SWS # 400-6897) > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components.
This Southwest Speed 1955-1957 Chevy front engine mounting kit mounts the Small Block Chevy engine in the correct location in 55-57 Tri-Five Chevy’s The front engine mounts includes the shafts, rubbers, washers, nuts, and lock washers that are usually missing or worn out on 55-57 Tri-Five Chevy's > This kit will do both sides, and includes everything pictured to restore the mounts back to new condition.
The Mounting brackets are Powder Coated Black and are the OEM replacement brackets with all the correct contours This kit includes both the left and right side front engine mounts, and both left and right side front engine mounting brackets, that includes everything pictured.
Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of t....

Fantastic design places turbo on the passenger side, very strong manifolds.
Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.

Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
NOTE: Kit designed to work with standard volume oil pumps..

✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
✅1 Year Unlimited-mileage Quality Guarantee.

All the owners of big and small block Chevy and Fords, drag rotaries, straight sixes and big turbo diesels looking for a better response from your turbo or supercharger.
Outlet fitting size: 50 millimeter (2.0 inch).

All the owners of big and small block Chevy and Fords, drag rotaries, straight sixes and big turbo diesels looking for a better response from your turbo or supercharger.
Outlet fitting size: 50 millimeter (2.0 inch).

...kit includes a replica GM 3899621 Bellhousing, Flywheel Inspection Cover, Clutch Fork with Ball Retaining Spring, Throwout Bearing, Clutch Fork Boot, Clutch Fork Pivot, Flywheel, Clutch Disc, Pressure Plate, and hardware (Part # 650-39755, 901180) > Fits transmissions with 1 5/32"-26 spline input shafts and Chevy engines with a 2 piece rear main seal.
The Southwest Speed 11" Performance Cast Aluminum Bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block and Small Block engines > This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, fit, and perform just like original > If you are doing a restoration of an early muscle car, or just want the correct bellhousing to finish that rod project, this bellhousing is the perfect part.
Fits: > 1964-1988 Chevy Chevelle, Malibu, Monte Carlo* > 1959-1987 Chevy El Camino* > 1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery* > 1963-1981 Chevy Corvette* > 1967-1981 Chevy Camaro* > 1968-1974 Chevy II, Nova* > *With Manual Transmissions and 168 tooth Flywhee....

Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit.
Throttle body mounted ECU – no extra computers to mount or relocate.
Self tuning ECU means you don’t have to be a computer/tuning expert to enjoy EFI.
Precision machined shutter wheel designed for improved accuracy at extreme engine RPM.

This HEI distributor comes complete and assembled ready to install which saves time and money.
Performance advance curve built in so there is no need for a re-curve kit.
For use with Small Block Chevy or Big Block Chevy Engines.
MSD Digital 6AL features a higher output with 530 primary volts and 135mJ of spark energy.
Includes (8) pre-made spark plug cables (both ends 90 deg.).

... filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make it easy to obtain even more uniform fuel pressure. Mounting bracket and rubber insulator are included to make installation a breeze..
Package Included: 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet..