Reviews Chemical Mounting Bolt

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.

...ion to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, speed bumps, signage, lights, parking barriers, and many more asphalt mounting applications..
EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole deep into th....

【Specification】: 6.5 Inch long spring bolt - 0.5" diameter round bolt - mounting plate: 1-9/16 inch by 3 inch.
【Heavy Duty】: Constructed of heavy duty metal.
zinc coated for rust protection, red handle cover for easy pulling and turning, ultra-durable and corrosion resistant, perfect for indoor and outdoor applications..
【Quick Release】: This spring bolt can lock in the open position, making your life easier. Simply pull back the bolt and rotate in place against the retaining pins - the tension from the spring will hold the latch open. Once you are ready to lock up, simply rotate the handle and the pin will automatically release..
【4 Mounting Holes】: Each unit comes with 4 mounting holes pre drilled for the quickest installation. These mounting holes are countersunk for a flush finish with screws and a semi recessed finish if bolting in place. (Fasteners not supplied).
【Package Included】: 4 x Spring-loaded barrel latches.

...liable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications..
EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole into the asph....

Straight 2-Bolt Style Toilets - most plastic RV toilet models 210, 110 Domestic/Sea Land models.
4-Bolt Style Toilets - 510 and older models.
Requires mounting adapter - sold separately.
Angled 2-Bolt Style Toilets - Older RV toilets (models vary).

Straight 2-Bolt Style Toilets - most plastic RV toilet models 210, 110 Dometic/SeaLand models.
4-Bolt Style Toilets - 510 and older models.
Requires mounting adapter - sold separately.
Angled 2-Bolt Style Toilets - Older RV toilets (models vary).

✔️【 Fits】Our 3500 lb Winch fits most bumpers or winch mounts with a 3.0" x 4.87" (76 x 124mm) mounting bolt pattern | 3.0" x 4.87" (76 x 124mm) mounting bolt pattern | Please Note: Requires machine-specific mounting plate or winch ready bumper (sold separately).
【3500 lb. Winch】Our 3500 lb. UTV Winch is ready to make sure you're not stranded on the trail! | Waterproof seals and solenoid | Powerful Permanent Magnet DC 12V 1.2 HP Motor | 3500 lb. rated line pull Synthetic 50' rope |166:1 gear ratio | SuperATV Winch Dimensions (LxWxH): 12.76" x 4.60” x 4.37" | Brakes to hold the spool on inclines.
【Kit Includes】Black Ops 3500lbs Winch | 50' synthetic rope | Wired dash rocker switch | Heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters) | Aluminum hawse fairlead—4.3” (109 mm)| Winch mount plate | Winch hook kit | Hook pull strap | Rope stopper | Instructions can be accessed through Manufacturers website or QR code.

Auto-latching design provides quick secure attachment of any Kolpin Stronghold products.
Engineered steel bracket for precision angling and attachment to vehicles.
Spring loaded latch with stainless steel spring.
Durable glass-reinforced nylon auto-latch construction.
Includes u-bolts and universal mounting hardware. Included Mounting Hardware: (8) Nylon Lock Nuts, M6-1.0, (8) Flat Washer, M6, (4) U-Bolt, M6-1.0 x 25mm ID x 45mm, (4) Flange Hex Bolt, M6-1.0 x 35mm LG, (1) Mounting Bracket.