Reviews Check Discharge

Holley 12-170 Elec Pump, 400 Lph

  • designed for high output naturally aspirated and forced induction efi and carbureted vehicles.
  • the roller vane design pump provides fuel pressure and volume to support up to 900 efi n/a or 700 efi boosted horsepower.
  • compatible with flex fuel (e85/e90) and all types of gasoline (100% alcohol fuels may diminish fuel pump life).
  • the inlet thread is a -8 an female orb (o-ring port fitting) and the discharge is a female -6 an orb (o-ring port fitting).
  • includes fuel pump, -6 to -8 male an discharge fitting with check valve, terminal nuts & boots, instructions.
Check Stock

PumpSpy Dual Pump Install Kit - Double Sump Pump Connection, Basement Water Pump Backup Y-Connector - Sump Pump Submersible Backup Connector To Single Discharge Line - Dual Pump System To 1-1/2' Line

  • EASY INSTALLATION: Installing a backup sump pump can be tedious but not with the PumpSpy Dual Pump Install kit! This kit comes with everything you need to connect 2 sump pumps together to a single discharge line. All you’ll need for the process is a standard screwdriver. Install your pumps in a fraction of the time..
  • IDEAL SAFEGUARD SYSTEM: A flooded basement can cost thousands of dollars in damages. The best way to protect yourself from this kind of disaster is with a backup sump pump. This dual water pump installation kit makes it easier for you to install a backup system to avoid what could potentially be a major inconvenience..
  • HASSLE-FREE SET UP: There’s no cutting or gluing required during installation with this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
  • WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/....
Check Stock

CNHL 2200mAh 3S Lipo Battery 30C 11.1V lipo Battery with XT60 for RC Airplane RC Quadcopter RC Evader BX Car RC Truggy RC Truck Boat(2 Packs)

  • 【Advantage】- CNHL 2200mAh 3S lipo battery xt60 is designed with high powerful performace with a discharge rate 30C(Burst 60C).Fast charge capability discharge high voltage instantly, long cycle life..
  • 【Specification】-Material: Lithium polymer.
  • 【Application】 - Special designed for 450 size helicopter, Glider and EPP, Skylark M4-FPV250, Mini Shredder 200, Vortex, Emax Nighthawk 250, 400mm X-Sled, etc. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【NOTE】- Built-in protection mechanism ensures safe charging and use. Never leave battery unattended when charging. Don't overcharge more than 4.2V and don’t over discharge below 3.2V. Check carefully the battery condition before using or charging. Don't over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
Check Stock

JACKEL 1/2 HP Pre-Plumbed Sump Pump System (Model: JPACK22S-250V)

  • 1/2 HP Sump Pump w Stainless Steel Housing, Cast Iron Volute, SJE-Rhombus Vertical Switch, Piggyback Plug.
  • Polyethylene Structural Foam Sump Basin ( 18 x 24 in. / 22 Gal. Capacity ).
  • Polyethylene Structural Foam Sump Basin Cover ( 1.5 in. Threaded Discharge Flange, 2 in. Threaded Vent Flange, 2-Hole Cord Grommet, Clear View Removable Inspection Plate and DrainTrap ).
  • 1.5 in. / 1.25 in. Check Valve and 4 in. Inlet Hub.
Check Stock

Little Giant WCR-9SS 115 Volt, 4/10 HP, 4800 GPH Sewage / Effluent / Wastewater Collection and Removal System, Steel Cover, Green / Blue, 509082

  • SEWAGE/EFFLUENT SYSTEM: contains 20"x30" basin, steel lid, sewage pump with float switch, PVC discharge piping and elbows, check valve, gromets, adaptors, and PVC elbows (assembly required).
  • LITTLE GIANT 9SC-CIA-RF SEWAGE PUMP INCLUDED: 115-Volt, 60 Hz, 4/10 HP continuous duty permanent split capacitor (PSC) motor.
  • AUTOMATIC OPERATION: equipped with a piggyback mechanical float switch.
  • actives when liquid reaches between 9 and 14 inches.
  • shuts off when liquid falls to between 2 and 6 inches.
Check Stock

budrash 731-07486 Lawn Mower Side Chute - Durable Discharge Chute Compatible with Craftsman Troy-Bilt MTD Huskee Yard Machines Self Propelled Push Mower Walk Behind Lawn Mower

  • 【Compatible Brands】The side discharge chute is compatible with Craftsman, Troy-Bilt, MTD, Huskee, Yard Machines, Yard Man, Columbia, Murray,....
  • 【Compatible Models】The mower chute is compatible with ①Craftsman M230(CMXGMAM1125502), M250(CMXGMAM1125503), ②Troy-Bilt TB110, TB130, TB220,....
  • 【Replaces OEM Part Numbers】731-07486. Please check the original part number and make sure this part fit your model before purchase..
  • 【Easy to Install】Just lift up the mulch cover, hook the discharge chute tabs onto the hinge pin, and release the mulch cover to hold the chute in....
  • 【Package Includes & Size】1 side discharge chute. With length 11", height 3-2/5"..
Check Stock

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

LiPo RC Battery GOLDBAT 5200mAh 2S 7.4V 50C LiPo Battery Pack with Hard Case Deans Plug for RC Evader BX Car Truck Truggy Buggy

  • 【Specification】- Battery voltage: 7.4V.
  • 【Notice】- Suggest use 0.5C-1C. Check carefully the battery condition before using or charging. Don’t over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
  • 【Application】- Specially designed for 1/8 and 1/10 rc car, Losi, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【High Performance】- Fast charge capability 1C-3C, highly suggest 1C. Long Cycle Life, up to 200Wh/kg energy density.
Check Stock

GOLDBAT 5000mAh 2S 7.4V 60C Shorty Hardcase LiPo Battery Pack with 4.0mm Bullet Deans Connector for RC 1/10 Scale Vehicles Car Trucks Truggy Boat Racing

  • 【High Performance】- Fast charge capability 1C-3C, highly suggest 1C. Long Cycle Life, up to 200Wh/kg energy density.
  • 【Specification】- Dimension: 3.7*1.77*0.98 inches.
  • 【Notice】- Suggest use 0.5C-1C. Check carefully the battery condition before using or charging. Don't over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
  • 【Application】- Fits models like 1/10 Scale Vehicles, especially those in need of shorty battery dimensions. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【AFTER-SALES】- Please contact us immediately if you have any problems, we will reply you within 24 hours..
Check Stock

Hanchen Liquid Filling Machine Automatic Bottle Filler 1-135 Fl Oz Digital Liquid Filler Cosmetic Oil Filling Machine for MCT Oil, Milk, Water, Juice, Essential Oil with 2 Heads Diaphragm Pump

  • ... filling equipment for small batch production in cosmetics, beverage, daily chemical, and other industries. It is suitable for thin (water-like or oil-like), particle-free, non-corrosive liquid, such as cosmetic oil, beer, beverage, essential oil, MCT oil, 45% alcohol, water, glass detergent, etc..
  • [SUS304 ANTI-DRIP DISCHARGE NOZZLE] Unlike plastic discharge nozzle used by other vendors, we adopts SUS304 material to make a long hollow discharge nozzle. 4mm and 6mm nozzles are included in the package, for bottles/pouches with different openings. Equipped with an check valve, nozzle ensures a stable filling process too..
  • [ONE-KEY TO CLEAN] No need to disassemble the filling machine. Only one key operation is required! Put mesh filter into clean water or detergent, press and hold “INCHING” to quickly and easily clean the whole tubing of the machine. In addition, mesh filters, check valves, and filling nozzles can be disassembled..
Check Stock