Reviews Cga 54valve

Uniweld RHP800 Nitrogen Regulator with 0-800 psi Delivery Pressure 2

  • Nitrogen Regulator, Delivery Pressure 0-800 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

LuckyHigh 2pcs Dual Welding Gas Gauges Oxygen (CGA-540) and Acetylene (CGA-510) Regulators Combo Solid Brass Gas Welder Regulator

  • Oxygen Regulator fits welding Oxygen Tanks with CGA-540 Valve.
  • Propane Regulator fits welding Propane tanks with CGA-510 valve..
  • Oxygen Outlet Pressure: 0-200 PSI,Acetylene Outlet Pressure: 0-30 PSI.
  • Oxygen Inlet: 0-4000 PSI,Acetylene Inlet: 0-400 PSI.
  • Welding Gas Gauges are made of solid brass..
Check Stock

Gurlleu Universal Paintball Tank CO2 CGA320 Adapter to 88g Cartridge Capsule Threaded Converter

  • Inner thread: Same as the 88g, 90g CO2 bottle. Outer thread: CGA-320 / G1/2-14..
  • Made of hard aluminum alloy, surface oxidation treated, durable and anti-corrosion..
  • With this adapter, you can attach a CO2 regulator with CGA320 thread to a paintball CO2 pin valve cylinder. Male CGA 320 thread fits the regulator..
  • Built-in pressure relief hole for safety when removing the adapter from the air tanks..
  • It is very easy to install, there is no high installation skill required..
Check Stock

SÜA - Propane Regulator Welding Gas Gauges - CGA-510 - Rear Connector - LDB series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses.

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

SÜA - Propane Regulator Welding Gas Gauges - CGA-510 - Rear Connector - LDP series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses.

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

SÜA - Oxygen and Acetylene Regulators Welding Gas Gauges Pair - Rear Entry - LDB series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • **READ THIS**: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

CGA320 G1/2 CO2 Tank Cylinder Refill Adapter Connector Kit, CO2 Adapter Valve For Filling Soda Maker Sodastream Tank

  • 【Application】--- The adapter allow to safely refill soda maker machine tank from larger tank, which consists of two parts, can be removed easily. Perfect for filling soda maker, soda stream tank in chemical, medicine and other fields..
  • 【Durable and Easy to Install】--- The CO2 tank cylinder refill adapter connector kit has been precision machined from solid brass, polished, and surface plating..
  • 【Large Tank Connect Thread】--- CGA320 G1/2 valve of CO2 tank. ON/OFF valve for safe and controlled release of gas..
  • 【Premium Safety】--- The CGA320 G1/2 CO2 tank refill adapter connector kit has a escape valve to safely release the residual gas within the adapter once refilling is completed..
  • 【Satisfied Guarantee】--- We provide lifetime money back guarantee, for any reason you're not completely satisfied, you can ask for a replacement or full refund..
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Uniweld RHP500 Nitrogen Regulator with 0-500 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-500 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Cyl-Tec CO2 Aluminum Cylinder with CGA 320 Valve, 5 lb

  • This new 5 lb CO2 tank is Great for kegs or home brewing! Other popular applications include hydroponics, aquariums, etc. Cyl-Tec is a cylinder supplier based in Aurora, IL. Be sure to visit our website at https://cyl-tec.com/.
  • SHIPPED EMPTY – Ships ready to fill (empty). Federal law requires that this tank ship without being filled. Once filled it can dispense 5-7 beer kegs..
  • DOT/TC CERTIFIED – 1800 PSI service pressure. Certified for use in the U.S.(DOT) and Canada (T.C.). The tank is stamped with these markings..
  • HIGH QUALITY – Sleek aluminum body. Made from high quality 6061-T6 brushed aluminum to ensure durability. Aluminum tanks are corrosion-resistant and will not rust as steel tanks do over time.
  • NEW VALVE – Includes NEW brass CGA 320 CO2 valve. 320 valves are approved by the Compressed Gas Association (CGA) and have a male thread for CO2 regulators. The black hand wheel is made of plastic as a safety feature. It will melt if the tank is exposed to extreme heat (i.e. a fire) and therefore show that that the tank is no longer safe to use.
Check Stock