Reviews Cfg Bracket Lamp

CJWDZ Reptile Lamp Stand Adjustable Terrarium lamp Holder Metal Material Landing Lamp Bracket with Base for Amphibian Lizards Turtles Snakes Spiders Terrarium Heating Light 25.2X11.8inch

  • ★ High Quality Material ★ This Detachable reptile light bracket is made of quality metal material, anti-deormation, anti-rust, sturdy and durable,....
  • ★Available for many heightsl★This lamp fiexed bracket is designed to accommodate different heights and suspend lamp device above terrarium....
  • ★Wide Application★ Suitable for different sizes of pet boxes, widely used for a wide variety of reptiles，plant and ampibians, including hermit....
  • ★Adjustable height and width★Adjustable Metal Lamp Support size is 25.2''x11.8''(inch) /36.2X12.6(inch) , set the optimum distance between the....
  • ★Effects★The detachable reptile lamp support bracket has a simple appearance and small size, which can be installed on different types of....
Check Stock

7 Inch Heavy Duty Square Detachable Lamp Shade with Lamp Finial Horn Bracket Lamp Shade Harp Holder DIY Lighting Replacement Accessories [FDXGYH]

  • Detachable and replaceable parts, lamp finial easily screws on or off, and the saddle can be removed if wishing to keep your existing saddle..
  • Harp bracket overall size is 7 x 3.8 inch, inner width 3.43 inch / 8.7 cm, saddle hole diameter is 0.4 inch / 10 mm, and 1/4"-27 threads (standard size for lamp finials) at top..
  • Made of high-quality iron, sturdy and durable, can hold up the heavy lamp shades perfectly..
  • Easy to install, used to fix the lampshade of the desk/floor lamp and protect the bulb to avoid damage..
  • Package includes 1pcs square lamp harp holder,1pcs lamp finial,1pcs horn bracket..
Check Stock

HUOKU Lamp Shades for Floor Lamps, Pendant Lighting and Chandelier Replacement, 3-Tier Drum Fabric Lampshade with Natural Linen Handcrafted(White)

  • Note:Before buying, please make sure your lamp bulb base is E26/E27 with Collar Ring (such as pictures), Used for Spider lamp shade..
  • 8 9 10 inch 3 LEVELS' ADJUSTABLE- to meet the use requirements of different height requirements. The frame bracket fits most parts of spider lamp shade without measuring the length of lamp shade..
  • Equipped with various lamp holder converters, 3/8 IP, E14, E26, E27. When your lamp holder is E14, you can use the E14 converter (white plastic part) to easily convert E27 to E14, and you can choose the size of the lampshade that best suits you for installation..
  • The kit include a crystal lamp finial which improve the appearance of your lamp and meet your replacement use. Heavy metal and dismountable thread rod could be use as curtain rod finial..
  • Package include:1x Adjustable 8 9 10 inch lamp shade holder bracket.
Check Stock

T and T TandT 40mm Ceramic Pressure Balance Cartridge JH02BJ HL-40 Blue Red

  • 40mm Wide, 75mm tall Ceramic Pressure Balance Cartridge.
  • Manufacturer Part Number: JH02BJ (HL-40).
  • 24 Point Brass Broach and Includes Square Handle Adapter.
  • Compatible with Faucets for ZURN, CFG, Dominion, and Others.
Check Stock

samman Trailer License Plate Light Bracket Universal Aluminum License Plate Holder for Most Trailer and Truck, blue

  • FITMENT: this license plate light bracket fits most truck and trailer, motorcycle, boat, snowmobile, It also compatible With most license plate and box-style lamps..
  • - BUILT TO LONG LAST: Trailer license plate mount bracket made of sturdy aluminum alloy, which is durable and rust-resistance, corrosion resistance, it is a much better idea than the plastic options,work out very well for marine environments even in salt.
  • - EASY TO INSTALL: The old license plate bracket and rear lamp should be removed before installation. First of all, peel off the blue film of your new bracket.
  • Secondly, fixed your lamp and new bracket to the screw hole position of the trailer and tighen.
  • EXCELLENT WORKMANSHIP: the trailer license plate holder has diamond pattern on the polished surface, come With a blue scratch-proof film, which can effectively prevent the plate rack from being scratched in transit..
Check Stock

AMBITFUL 61-81cm/21-31.9 Profession Removable Very Sturdy Folding Floor Light Stand and Wheels for Studio Flash LED Light

  • This wheeled light stand is a Full Metal BaseFold and Store,Unfold More for many application like photography, filming, broadcast, theater, concerts....
  • Detachable Bottom Bracket Adjustableto 81cm,The central axis is thickened and theheight can be adjusted.
  • Double-Head Universallnterface:Compatible with studio lights, flashes,lamp holders or fill lights, etc..
  • Brake Light FrameWheel:The base lamp holder wheel is equipped with a pressingbrake, and the ground lanp holder is behind the deviceaccessories, step....
  • Product List: 1/ 4 to 3/8 port *1 , Detachable bottom bracket* 1, Lamp holder chassis *1, Lamp Holder Wheel *3.
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

DZS Elec Black Round Light Bulb Holder with Lamp Shade Attaching Finial DIY Lighting Accessories Clip On Lampshade Adapter for Lighting Fittings

  • Elegant black, with your decorative style.
  • Package includes: 1 x clip on lampshade adapter.
  • Made of high quality metal, electrophoretic paint technology, rust proof, corrosion resistant, durable.
  • Excellent DIY lighting accessories, can be used for table lamp, floor lamp, vertical lamp, table lamp, etc.
  • It is suitable for DIY lighting engineering of family, restaurant, coffee shop and so on. It can make unique lamps and lanterns according to your own will.
  • Clip on adaptor with matching top holds the shade to a regular shaped bulb and holds the cover in place without a bracket bracket.
Check Stock

Motorcycle License Plate Bracket Fender Eliminator Adjustable, Universal Motorcycle License Plate Holder, Folding License Plate Holder

  • ★ Adjustable design: The motorcycle license plate bracket is specially designed with a foldable bracket, which is convenient to adjust according to your needs..
  • ★ Easy to install: The folding tail light license plate holder kit is easy to install, without modification, cutting or drilling..
  • ★ The high-quality license plate bracket is made of aluminum alloy. The foldable license plate taillight frame is made of high-quality aluminum alloy, which is scratch-resistant and wear-resistant, strong, high-strength, and long in service life..
  • ★ Purpose: You can install license plates and tail lights on the license plate frame..
  • ★ Multi-purpose: motorcycle tail lamp holder is very suitable for dual sports applications, off-road vehicles, ATV or youth monkey bike.
  • this motorcycle tail lamp bracket can be installed with tail lights (not included) and ordinary license plates..
Check Stock

Zilla Reptile Habitat Lighting, Terrarium Heat Lamp Halogen Mini Dome

  • HEIGHT & WIDTH ADJUSTABLE--Our floor lamp bracket can be used to attach the heating lamp and lighting device on the top of terrarium. With adjustable design, you can easily adjust the lighting distance according your different needs..
  • SIZE--Height and width adjustable: height after stretching of the lamp holder: about 38-64cm / 15-25in .
  • width after stretching: about 20-30cm /7.85-11.8in .
  • DURABLE MATERIAL--The detachable reptile lamp support bracket is made of premium metal material, anti-deformation, anti-rust, sturdy enough to last for years of usage..
  • EASY INSTALLATION--Easy to assemble, IN ORDER TO KEEP THE LIGHT STAND STABLE,YOU'D BETTER USE A HEAVYOBJECT TO PRESS THE BASE.Detachable design for easy storage.With fixed wire casing, can be used to fix wire.Classic black hook for easy suspension..
  • WIDE APPLICATION--Suitable for different sizes of pet boxes, widely used for a wide variety of reptiles and amphibians, including hermit crabs, bearded dragons, tortoises, turtles, geckos, lizards, frogs,spiders, etc..
Check Stock