Reviews Cf Front Bumper

(2) Memphis Audio MJP1522 15' 1500w MOJO Pro Car Audio Subwoofers DVC 2 ohm Subs

  • Package Includes: (2) Memphis Audio MJP1522 15″ 1500 Watt MOJO Pro Car Audio Subwoofer DVC 2 ohm Sub.
  • Features: Specifically designed for high SPL performance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 15 Inch. Voice coil: DUAL 2Ω. RMS/PEAK: 750/1500 Watts. SENS: 87 dB. DEPTH: 7.88 Inch. CUT OUT: 13.84 Inch.
  • Thiele Small Parameters: Resonant Frequency (fs): 33.6 Hz. Mechanical Q (Qms): 7.95. Electrical Q (Qes): 0.823. Total Q (Qts): 0.746. Sensitivity: 87 dB. Xmax Linear: 0.51 in. Displacement: 0.29 cf. Air Volume of Suspension (Vas): 2.31 cf. Moving Mass (Mms): 334.4 g. Suspension Compliance (Cms): 0.067 mmN. Effective Piston area (Sd): 829.58 SqCm. Motor Strength (Bl): 9.3 TM. DC Resistance: 1 Ohms.
  • Voice Coil & Magnet: Impedance Series: 4 ohms. Impedance Parallel: 1 ohms. Voice Coil Diameter: 2.5 in. RMS Power: 750 watts. Peak Power: 1500 watts. Magnet Weight: 120 oz. Magnet Diameter: 6.69 in. Physical Dimensions: Mounting Depth: 7.88 in. Cutout Diameter: 13.84 in. Frame Outside Diameter: 15.9 in.
  • Enclosure Recommendations: Single Sub Sealed: 2.6 cf. Dual Subs Sea....
Check Stock

(2) Memphis Audio MJP1544 15' 1500w MOJO Pro Car Audio Subwoofers DVC 4 ohm Subs

  • Package Includes: (2) Memphis Audio MJP1544 15″ 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub.
  • Features: Specifically designed for high SPL performance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 15 Inch. Voice coil: DUAL 4Ω. RMS/PEAK: 750/1500 Watts. SENS: 88 dB. DEPTH: 7.88 Inch. CUT OUT: 13.84 Inch.
  • Thiele Small Parameters: Resonant Frequency (fs): 31.2 Hz. Mechanical Q (Qms): 6.558. Electrical Q (Qes): 0.727. Total Q (Qts): 0.65. Sensitivity: 88 dB. Xmax Linear: 0.51 in. Displacement: 0.29 cf. Air Volume of Suspension (Vas): 2.93 cf. Moving Mass (Mms): 305.92 g. Suspension Compliance (Cms): 0.085 mmN. Effective Piston area (Sd): 829.58 SqCm. Motor Strength (Bl): 12 TM. DC Resistance: 1.75 Ohms.
  • Voice Coil & Magnet: Impedance Series: 8 ohms. Impedance Parallel: 2 ohms. Voice Coil Diameter: 2.5 in. RMS Power: 750 watts. Peak Power: 1500 watts. Magnet Weight: 120 oz. Magnet Diameter: 6.69 in.
  • Physical Dimensions: Mounting Depth: 7.88 in. Cutout Diameter: 13.84 in. Frame Outside Diameter: 15.9 in. Enclosure Recommendations: Single Sub Sealed: 2.6 cf. Dual Subs ....
Check Stock

(2) Memphis Audio MJP1244 12" 1500w MOJO Pro Car Audio Subwoofers DVC 4 ohm Subs

  • Package Includes: (2) Memphis Audio MJP1244 12" 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub.
  • Features: Specifically designed for high SPL peformance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 12 Inch. Voice coil: DUAL 4Ω. RMS/PEAK: 750/1500 Watts. SENS: 85.68 dB. DEPTH: 6.23 Inch. CUT OUT: 11.34 Inch.
  • Thiele Small Parameters: Resonant Frequency (fs): 36.7 Hz. Mechanical Q (Qms): 7.217. Electrical Q (Qes): 0.764. Total Q (Qts): 0.69. Sensitivity: 85.68 dB. Xmax Linear: 0.51 in. Displacement: 0.16 cf. Air Volume of Suspension (Vas): 1.09 cf. Moving Mass (Mms): 241.3 g. Suspension Compliance (Cms): 0.078 mmN. Effective Piston area (Sd): 530.93 SqCm. Motor Strength (Bl): 11.23 TM. DC Resistance: 1.73 Ohms.
  • Voice Coil & Magnet: Impedance Series: 8 ohms. Impedance Parallel: 2 ohms. Voice Coil Diameter: 2.5 in. RMS Power: 750 watts. Peak Power: 1500 watts. Magnet Weight: 120 oz. Magnet Diameter: 6.69 in. Physical Dimensions:. . Mounting Depth: 6.23 in. Cutout Diameter: 11.34 in. Frame Outside Diameter: 12.94 in.
  • Enclosure Recommendations: Single Sub Sealed: 1.5 cf. D....
Check Stock

Deecam Car Universal Front Bumper Lip Body Kits, Car Bumper Lip Splitter Chin Spoiler Front Body Shovel Kits Front Lip Spoiler Edging Waterproof Protection Suitable for Audi, BMW, Benz, Lexus, Toyota

  • 【Universal Front Bumper Lip】This front bumper is suitable for most models with front bumper size around 63-72 inch (there may be 1~2 inches of error in measurement). Front Bumper Lip is suit for Audi, BMW, Benz, Lexus, Porsche, Toyota, Honda, Chevrolet, GMC, Ford, Lincolin, Land Rover, ect.Please measure the size of your vehicle before purchasing..
  • 【Effective Protection】Exquisite Paint through strict quality control standards to build and test. Premium ABS material is protective, the front bumper lip can reduce some impact resistance, prevent your cars from collision and alleviate damage..
  • 【Appearance】The black front bumper lip splitter can decorate the front bumper of your car and give it a lower look. Installing universal car front lip will beautify the appearance of your vehicle and enhance the visual effect..
  • 【Easy to install】The front lip chin bumper body kit is easy to install and long-lasting use.Professional installation is highly recommended. If you don’t know whether your car fix the bumper lip or how to install, please contact us..
  • 【Sale commitment】After receiving the Front Bumper Lip , please contact us in time if there is any size problem or product defect. Please free to contact us, we will solve the problem for you wi....
Check Stock

ARRMA Bumper and Skids ARA320617

  • Features: Tough composite material for increased impact resistance Extra-wide front bumper Front bumper spring add impact absorbing capabilities....
  • Includes: (1) Wide front bumper (1) Front bumper spring (1) Rear bumper (4) M4 x 16mm cap head screw.
  • Part number(s) included (in factory packaging): ARA320617.
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

JY Sdyl Universal Front Bumper Lip Splitter Spoiler Front bumper lip body kit Adjustable Front Spoiler 3pcs Black-Carbon fiber

  • ★Applicable model：The Universal Front Bumper Lip Body Kit is adjustable, fits for most cars and can rotate the front splitter angle, making it fit....
  • ★Upgrade Appearance: Carbon Fiber front bumper lip splitter can significantly change the way the exterior of your car looks. It increases car’s....
  • ★Premium Material: The front bumper lip separator is made of high-quality ABS material, which is waterproof, sturdy, impact-resistant and not easy....
  • ★Easy to install: Integrated consideration of fastness, the bumper lip require drilling holes and apply bolts to attach to your bumper. You can....
  • ★Package & Service: 1 *Universal Front Bumper Lip Body Kit. If you have any questions about the Black/Carbon Fiber front bumper lip splitter, please....
Check Stock

ABX Carbon Fiber Look Universal Car Front Bumper Lip Chin Spoiler Splitter Body Kit

  • 【Carbon Fiber Look Bumper Lip】This front bumper lip splitter is fit for most models with front bumper size around 62.99 inch-72.04 inch, Fit For....
  • 【Premium material】 Package Included: Front Bumper Lip 4PCS + with Screws kit, Include instructions..
  • 【Elegant Appearance】Black front bumper lip splitter, elegant and personalized appearance will beautify the appearance of your vehicle and enhance....
  • 【Providing Protect】Front bumper guard anti-collision protective, it can reduce wind resistance, prevent your cars from collision and alleviate....
  • 【Easy Installation】Easy to install and long-lasting use. 9-hole screw positioning makes installation easier and more reliable. Professional....
Check Stock