Reviews Ceramic Pcb Supplier

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

LDK Soldering Iron Kit Electric 60W 110V Adjustable Temperature Soldering Gun Welding Tools, 5pcs Replacement Tips, 30g 0.8mm Solder Wire, Heavy Duty Holder, Cleaning Sponge, Solder Paste

  • 60W 110V Adjustable Temperature Soldering Iron: Inner-heated ceramic technology makes the soldering kit heat up very quickly (within 2 minutes)..
  • Solder paste is a mixture of minute solder spheres held within a specialized form of solder flux. The fact that it is a paste means that it can be easily applied to the board during PCB assembly..
  • Quality soldering iron stand with cleaning sponge..
  • Professional soldering iron suitable for basic DIY fixes. It would be very satisfactory for the typical electronics hobbyist, maker, tinkerer, or DIY repairs enthusiast..
  • Satisfaction Guarantee: Our soldering kit is backed by our manufacturer 180-day money back guarantee..
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

4 in 1 45A ESC, 45A 2‑6S ESC with Double Hole Spacing RC Drone Quadcopter Electronic Speed Controller

  • ... size as that of a flat knitting machine, and the installation and wiring will become very simple. This incredible size and volume is designed for racing traversers..
  • PCB Production Process : EMF8BB21F16G main control chip, operating frequency up to 48MHz, three-in-one IC driver, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pads are edged by metallization, which can prevent the pads from falling off during use. 3 oz copper thick, six-layer board, greatly reduces heat, thus increasing efficiency..
  • Anti-Jamming and Fast Response : Not only supports normal PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high temperature resistance, and easy to solder..
  • Feature-Rich : Using BLHeli‑S firmware, it has powerful performance and rich functions, supports multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, using other development boards, or using cleanflight or for setting or upgrading Betaflight firmware for ESC)..
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

iSonic P4890(II) Commercial Ultrasonic Cleaner, Plastic Basket, Heater, Drain, 110V, 2.3Gallons / 9 Litre, 25.5\ Long Tank, Orange/Black

  • iSonic P4890(II) Commercial Ultrasonic Cleaner, 2.3Gal/9L, 25.5" long tank, orange/black color, plastic basket, heater, drain, 110V.
  • Stainless Steel Tank, Tank Size 25.5"x7"x4.1".
  • Ultrasonic Frequency 35,000 Hz, 110V 500W.
  • Timer Settings: 1 to 30 minutes full range timer.
  • 4 industrial grade stack transducers with individual control PCB for unmatched cleaning power.
  • Heater with 5 settings: 104, 113, 122, 131 and 140 °F / 40, 45, 50, 55 and 60 °C Thermometer.
Check Stock

Detroit Axle - Pair (2) Rear Brake Drums with Ceramic Brake Shoes w/Brake Cleaner & Fluid for 2001 2002 2003 2004 2005 2006 Nissan Sentra

  • Kit Includes: (2) Rear Brake Drums, (2) Rear Ceramic Brake Shoes, and (2) Brake Cleaner Fluid Bottle.
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket.
  • Please check the compatibility and the view notes before purchasing the item, make sure it fits your vheicle.
Check Stock